Building Supplies

This Carving/Engraving Accessory is a 5/16" High-Speed Cutter Bit by Dremel. Features: * A high-quality, versatile cutter made from high-grade steel. * Ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes in soft metals, plastics and woods. * Great for curved surfaces. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. High-Speed Steel Cutter

This Carving/Engraving Accessory Is A 3/32" High-Speed Cutter Bit by Dremel. Features: * A high-quality, versatile cutter made from high-grade steel. * Ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes in soft metals, plastics and woods. * Great for curved surfaces. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. High-Speed Steel Cutter

This Is Dremel's Chain Saw 3/16" Sharpening Stone Accessory Bit. Features: * A precision-ground abrasive made for extended usage. * Reddish brown sharpening stone. * Ideal for sharpening chain saw blades/chains, quickly and easily.
...more about the Dremel Mfg. Co. Chain Saw Sharpening Stone 3/16''

This is Dremel's 1/4" Straight Router Bit. Features: * A high-speed router made from high-grade steel. * Ideal for routing, inlaying and mortising in wood and other soft materials. * A straight router bit is used for cutting square grooves, rabbets and dadoes, and for leveling recessed areas.
...more about the Dremel Mfg. Co. Routing Bit Straight 1/4''

This is Dremel's 3/16" Diamond Cylinder Point Accessory Bit. Features: * A high-speed cutter made of steel. * Bit is covered with diamond particles. * For fine detail work, cutting, engraving, carving, touch-up and finishing. * Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. * Removes material quickly and easily. * For flat surfaces.
...more about the Dremel Mfg. Co. Diamond Cylinder Point .18 Dia 3/32''

This is Dremel's 1/8" Tungsten Carbide Cutter Accessory Bit. Features: * A high-speed cutter made of tungsten carbide, the hardest material next to diamonds. * Pointed tip. * Ideal for shaping, smoothing or removing material from especially hard materials including hardened steel, stainless steel, cast. * iron, nonferrous metals, fired ceramics, plastics and hard woods. * Use this bit at higher speeds for hard woods, slower speeds for metals, and very slow speeds for plastics.
...more about the Dremel Mfg. Co. Tungsten Carbide Cutter

This is Dremel's 1/4" Structured Tooth Tungsten Carbide Cutter Accessory Bit. Features: * A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. * Rounded (ball-nose) tip. * Ideal for fast material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard, soft metals, and ceramic wall. * tile. * Use this bit at higher speeds for hard woods, slower speeds for metals, and very slow speeds for plastics.
...more about the Dremel Mfg. Co. Tungsten Cutter Ball Nose

This Is A Rough 'n Tough Carbide Cutter (Coarse Cone) from Robart.
...more about the Robart Carbide Cutter Cone Coarse

This is a Rough 'n Tough Carbide Cutter (Fine Rod) from Robart.
...more about the Robart Carbide Cutter 1/4'' Rod Fine

This is a Rough 'n Tough Carbide Cutter (Coarse Rod) from Robart.
...more about the Robart Carbide Cutter 1/8'' Rod Coarse

This is an Assortment of 6 Rough 'n Tough Carbide Cutters (Coarse) from Robart.
...more about the Robart Carbide Cutter Coarse Set of 6

This is a 1" 68 Tooth Saw Blade from Gyros Products. Features: * For craftsmen, model makers, hobbyists, and do-it-yourself hardware applications. * Works well with a Dremel tool. * Fine teeth. * Quality steel construction. * For wood, plastic and soft metal.
...more about the Gyros Products Co Fine Saw 1x1/8'' Hole

This is a 1-1/4" 80 Tooth Saw Blade with Mandrel from Gyros Products. Features: * For craftsmen, model makers, hobbyists, and do-it-yourself hardware applications. * Works well with a Dremel tool. * Fine teeth. * Quality steel construction. * For wood, plastic and soft metal. * Includes #8018100 mandrel (GYRR4500).
...more about the Gyros Products Co Fine Saw/Mandrel 1-1/4''x1/8''

This Dremel Rotary Tool Accessory is a Keyless Chuck. Features: * Allows you to quickly and easily change accessory bits on your Dremel Corded Rotary Tools without changing collets. * It accepts all accessory bits with 1/32" and 1/8" shanks. * Made of durable metal. * Keyless.
...more about the Dremel Mfg. Co. MultiPro Chuck Keyless

This is a Package of 36 Fine Sanding Discs (240 grit) from Dremel. Features: * A fine sanding disc made of aluminum oxide. * Classified as 240 grit. * For light and detailed sanding. * Also for rough shaping and smoothing wood and fiberglass; removing rust from metal surfaces; shaping rubber surfaces. * Great for model making, dollhouse furnifure and other miniatures. * Discs come in a handy plastic tube.
...more about the Dremel Mfg. Co. Sanding Disc Fine (36)

This is Dremel's 1/4" Drum Sander Accessory Bit. Features: * A cylinder covered with aluminum oxide abrasive that sits atop a mandrel. * The band covering the cylinder is coarse 60 grit. * The band is replaceable. * Ideal for rough-shaping and smoothing wood and fiberglass; as well as removing rust from metal surfaces, shaping rubber surfaces,. * furniture refinishing, and more. * Sand inside curves.
...more about the Dremel Mfg. Co. Drum Sander-Coarse 1/4''

This is a Package of Eight 1/4" Sanding Bands from Dremel. Features: * An abrasive band made of aluminum oxide. * Classified as coarse 60 grit. * Easily replaceable on the drum sander (DRER0965). * Ideal for rough-shaping and smoothing wood and fiberglass; as well as removing rust from metal surfaces, shaping rubber surfaces,. * furniture refinishing, and more. * Sand inside curves.
...more about the Dremel Mfg. Co. Sander Bands-Coarse 1/4''

This is Dremel's EZ Lock Abrasive Wheels. Features: Compatible with both EZ402 EZ Lock Mandrel and Standard 402 Mandrel The Dremel EZ Lock makes accessory changes easy as PULL-TWIST-RELEASE One-piece mandrel design.
...more about the Dremel Mfg. Co. EZ Lock Abrasive Wheels (2)

This is Dremel's 3/4" Carbon Steel Brush Accessory Bit. Features: * A wheel-shaped brush with carbon steel wire bristles. * Ideal for cleaning flat surfaces and removing rust and corrosion from items made of brass, copper, or other soft ferrous metals. * such as tools, door knobs, automobile parts, and electrical. * contacts. * Remove buildup from faucets, clean camp stove burners and more! * You can also use wire brushes to create an artistic effect on coarse- grained wood. * Its shape makes it well suited for getting into hard-to-reach places like slots.
...more about the Dremel Mfg. Co. 3/4'' Clean/Polish Wire Brush

This is Dremel's 1/8" Carbon Steel Brush Accessory Bit.
...more about the Dremel Mfg. Co. 1/8'' Clean/Polish Wire Brush

These Are 1-1/2" Reinforced Cut-Off Wheels from Dremel. Features: * Makes it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. * For slicing and cutting metal, wood and plastic. * Made of a hard abrasive and reinforced with fiberglass for extra strength. * Designed to be used with a washer set that provides extra support. * Ideal for cutting, grooving and trimming all kinds of materials including metal, wood and ceramics. * Cut through pipe, gutters, rusty bolts, hose clamps, sheet metal and a whole lot more!.
...more about the Dremel Mfg. Co. Cut-Off Wheels 1-1/2'' (10)

This Is Dremel's Diamond Wheel Accessory Bit. Features: * A metal wheel completely coated with fine diamond particles for working with hard materials. * Designed to last and not lose its shape or break. * Provides smooth fine cuts. * Great for cutting, sawing, carving, sharpening, and filing of hard materials. * Use on wood, concrete, brick, porcelain, ceramics, tile, epoxy, marble.
...more about the Dremel Mfg. Co. Diamond Wheel

This Strip Bag Is An Economy Bag of 1/4 Board Foot Balsa and Basswood from Midwest Products Company. Features: * Use for all types of modeling, craft, miniature and woodworking projects.. * This bag contains random sizes and shapes of Midwest's wood.. * Contains 1/4 board foot (36 cubic inches) Balsa and Basswood..
...more about the Midwest Balsa & Basswood Economy Bag

This is a Package of 36 Micro-Cut Balsa Strips (1/8"x 1/8"x 36") by Midwest Products Company. Features: * Balsa is the premier wood for all types of modeling projects. * Recommended uses: airplanes, boats, crafts, model railroad, and miniatures. * Balsa cuts easily with a hobby knife, and may be stained or painted to represent any wood type. * Midwest's Balsa is carefully dried in special kilns, reducing the water content to leave a light wood with a high strength to weight ratio. * Micro-Cut Quality Wood assures you of the following. * -Absolutely the most accurate thickness tolerances of +/- .002". * -Five step inspection process to insure consistent quality. * -Highest q
...more about the Midwest Balsa 1/8x1/8x36'' (36)

This is a Package of 25 Micro-Cut Balsa Strips (3/16"x 3/16"x 36") by Midwest Products Company. Features: * Balsa is the premier wood for all types of modeling projects. * Recommended uses: airplanes, boats, crafts, model railroad, and miniatures. * Balsa cuts easily with a hobby knife, and may be stained or painted to represent any wood type. * Midwest's Balsa is carefully dried in special kilns, reducing the water content to leave a light wood with a high strength to weight ratio. * Micro-Cut Quality Wood assures you of the following. * -Absolutely the most accurate thickness tolerances of +/- .002". * -Five step inspection process to insure consistent quality. * -Highest
...more about the Midwest Balsa 3/16x3/16x36'' (25)

This is a Package of 20 Micro-Cut Balsa Strips (1/4"x 1/4"x 36") by Midwest Products Company. Features: * Balsa is the premier wood for all types of modeling projects. * Recommended uses: airplanes, boats, crafts, model railroad, and miniatures. * Balsa cuts easily with a hobby knife, and may be stained or painted to represent any wood type. * Midwest's Balsa is carefully dried in special kilns, reducing the water content to leave a light wood with a high strength to weight ratio. * Micro-Cut Quality Wood assures you of the following. * -Absolutely the most accurate thickness tolerances of +/- .002". * -Five step inspection process to insure consistent quality. * -Highest q
...more about the Midwest Balsa 1/4x1/4x36'' (20)

This is a Package of 12 Micro-Cut Balsa Strips (3/8"x 3/8"x 36") by Midwest Products Company. Features: * Balsa is the premier wood for all types of modeling projects. * Recommended uses: airplanes, boats, crafts, model railroad, and miniatures. * Balsa cuts easily with a hobby knife, and may be stained or painted to represent any wood type. * Midwest's Balsa is carefully dried in special kilns, reducing the water content to leave a light wood with a high strength to weight ratio. * Micro-Cut Quality Wood assures you of the following. * -Absolutely the most accurate thickness tolerances of +/- .002". * -Five step inspection process to insure consistent quality. * -Highest q
...more about the Midwest Balsa 3/8x3/8x36'' (12)

This is a Package of 10 Micro-Cut Balsa Strips (3/8"x 1/2"x 36") by Midwest Products Company. Features: * Balsa is the premier wood for all types of modeling projects. * Recommended uses: airplanes, boats, crafts, model railroad, and miniatures. * Balsa cuts easily with a hobby knife, and may be stained or painted to represent any wood type. * Midwest's Balsa is carefully dried in special kilns, reducing the water content to leave a light wood with a high strength to weight ratio. * Micro-Cut Quality Wood assures you of the following. * -Absolutely the most accurate thickness tolerances of +/- .002". * -Five step inspection process to insure consistent quality. * -Highest q
...more about the Midwest Balsa 3/8x1/2x36'' (10)

This is a Package of 20 Micro-Cut Balsa Sheets (1/32"x 2"x 36") by Midwest Products Company. Features: * Balsa is the premier wood for all types of modeling projects. * Recommended uses: airplanes, boats, crafts, model railroad, and miniatures. * Balsa cuts easily with a hobby knife, and may be stained or painted to represent any wood type. * Midwest's Balsa is carefully dried in special kilns, reducing the water content to leave a light wood with a high strength to weight ratio. * Micro-Cut Quality Wood assures you of the following. * -Absolutely the most accurate thickness tolerances of +/- .002". * -Five step inspection process to insure consistent quality. * -Highest qu
...more about the Midwest Balsa 1/32x2x36'' (20)