Power Tools

This is the Dremel 69-Piece Cut-Off Wheel Set. Features: Reslot a screw, cut conduit, sheet metal or rusted hose clamps and much more Works with all Dremel rotary tools.
...more about the Dremel Mfg. Co. Cutting Kit 69 pcs.

This is Dremel's 5/16" Structured Tooth Tungsten Carbide Cutter Accessory Bit. Features: * A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. * Cylinder tip. * Ideal for fast material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard, soft metals, and ceramic wall. * tile. * Use this bit at higher speeds for hard woods, slower speeds for metals, and very slow speeds for plastics.
...more about the Dremel Mfg. Co. Tungsten Cutter Cylinder

This is Dremel's 1/2" (45 Degree) Chamfer Router Accessory Bit. Features: * A high-speed router made from high-grade steel. * For routing, inlaying and mortising in wood and other soft materials. * Used for beveling and decorative edging.
...more about the Dremel Mfg. Co. Chamfer Router Bit 45 Degrees

This is Dremel's Tungsten Carbide 1/8" Cutter Accessory Bit. Features: * A high-speed cutter made of tungsten carbide--the hardest material next to diamonds. * Ideal for shaping, smoothing, or removing material from especially hard materials--including hardened steel, stainless steel, cast. * iron, nonferrous metals, fired ceramics, plastics and hard woods.
...more about the Dremel Mfg. Co. Tungsten Carbide Cutter

This is Dremel's 1/8" Tungsten Carbide Cutter Accessory Bit. Features: * A high-speed cutter made of tungsten carbide, the hardest material next to diamonds. * Rounded tip. * Ideal for shaping, smoothing or removing material from especially hard materials including hardened steel, stainless steel, cast. * iron, nonferrous metals, fired ceramics, plastics and hard woods. * Use this bit at higher speeds for hard woods, slower speeds for metals, and very slow speeds for plastics.
...more about the Dremel Mfg. Co. Tungsten Carbide Cutter

This Is A Rough 'n Tough Carbide Cutter (Coarse Cone) from Robart.
...more about the Robart Carbide Cutter Cone Coarse

This Is A Rough 'n Tough Carbide Cutter (Fine Ball) from Robart.
...more about the Robart Carbide Cutter 3/8'' Ball Fine

This is a Rough 'n Tough Carbide Cutter (Fine Rod) from Robart.
...more about the Robart Carbide Cutter 1/4'' Rod Fine

This is a Rough 'n Tough Carbide Cutter (Coarse Rod) from Robart.
...more about the Robart Carbide Cutter 1/8'' Rod Coarse

This is Dremel's 5/64" Diamond Taper Point Accessory Bit. Features: * A high-speed cutter made of steel. * Bit is covered with diamond particles. * For fine detail work, cutting, engraving, carving, touch-up and finishing. * Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. * Removes material quickly and easily. * For hard-to-reach areas.
...more about the Dremel Mfg. Co. Diamond Taper Point .08 Dia 3/32''

This Is Dremel's Chain Saw 3/16" Sharpening Stone Accessory Bit. Features: * A precision-ground abrasive made for extended usage. * Reddish brown sharpening stone. * Ideal for sharpening chain saw blades/chains, quickly and easily.
...more about the Dremel Mfg. Co. Chain Saw Sharpening Stone 3/16''

A high-quality industrial abrasive made for extended usage. Ideal for sharpening, deburring and general purpose grinding on most materialsincluding stainless steel. Specially designed for working with flat and slotted surfaces. .
...more about the Dremel Mfg. Co. Aluminum Oxide Grinding Stone 3/16''

This is Dremel's 3/16" Silicone Carbide Grinding Stone Accessory Bit. Features: * A high-quality industrial abrasive made for extended usage. * Ideal for sharpening, deburring, cleaning and general purpose grinding on harder materials--including stone, glass, ceramic,. * porcelain, gemstones, and nonferrous metals. * Specially designed for working with conic surfaces. * Use for all types of deburring, blending and finishing operations.
...more about the Dremel Mfg. Co. Silicone Grinding Stone

A high-quality industrial abrasive made for extended usage. Ideal for sharpening, deburring and general purpose grinding on most materialsincluding stainless steel. Specially designed for working with curved surfaces. .
...more about the Dremel Mfg. Co. Aluminum Oxide Grinding Stone

This Carving/Engraving Accessory is a 1/4" High-Speed Cutter Bit by Dremel. Features: * A high-quality, versatile cutter made from high-grade steel. * Ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes in soft metals, plastics and woods. * Great for curved surfaces. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. High-Speed Steel Cutter

This Carving/Engraving Accessory is a 1/32" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory is a 1/16" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory is a 3/32" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory is a 1/32" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory is a 1/16" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory Is A 5/64" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory is a 1/32" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory is a 3/64" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory is a 1/16" Engraving Cutter Bit by Dremel. Features: * A high-speed cutter designed for precision engraving. * Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. Engraving Cutter

This Carving/Engraving Accessory is a 5/16" High-Speed Cutter Bit by Dremel. Features: * A high-quality, versatile cutter made from high-grade steel. * Ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes in soft metals, plastics and woods. * Great for curved surfaces. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. High-Speed Steel Cutter

This Carving/Engraving Accessory is a 5/16" High-Speed Cutter Bit by Dremel. Features: * A high-quality, versatile cutter made from high-grade steel. * Ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes in soft metals, plastics and woods. * Great for flat and slotted surfaces. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. High-Speed Steel Cutter

This Carving/Engraving Accessory is a 1/4" High-Speed Cutter Bit by Dremel. Features: * A high-quality, versatile cutter made from high-grade steel. * Ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes in soft metals, plastics and woods. * Great for flat and slotted surfaces. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. High-Speed Steel Cutter

This Carving/Engraving Accessory is a 1/4" High-Speed Cutter Bit by Dremel. Features: * A high-quality, versatile cutter made from high-grade steel. * Ideal for shaping, hollowing, grooving, slotting, inlaying, and making holes in soft metals, plastics and woods. * Great for curved surfaces. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. High-Speed Steel Cutter

This Carving/Engraving Accessory is a 1/8" High-Speed Cutter Bit by Dremel. Features: * A high-quality, versatile cutter made from high-grade steel. * Ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes in soft metals, plastics and woods. * Great for conic surfaces. * Repair furniture, create a decorative sign, engrave your valuables.
...more about the Dremel Mfg. Co. High-Speed Steel Cutter