|
|
This is the Great Planes Pro CA activator with a pump. This is great for thick and medium CA that doesn't cure as fast as the instant. All you have to do is apply the CA then spray the Activator on the CA and it cures almost instantly. Another way to apply this is to first apply the activator to a piece of balsa you want to join to another piece, then add CA to the other piece, when you put them together, you have an instant glue joint. The pump makes life that much easier, just hold the bottle 4-6" away from area your spraying and pump once or twice and it's done.
...more about the Great Planes Pro CA Activator 2 oz w/Pump Foam Safe
|
|
|
|
This is a 5 oz. Bottle of NCF Accelerator for use with Satellite City and other instant CA glues. For experienced modelers, made by Hot Stuff. Features: * Speeds the curing time of glues for quicker solidifying process. * NCF accelerator is a direct replacement for the "kick it" accelerator. * Contains no freons and has a 12 minute "on part life" (how long it kicks).
...more about the Hot Stuff NCF5 NCF Accelerator 5 oz
|
This is the 6oz (170g) NCF Quick Aerosol Instant Glue Accelerator from Hot Stuff. Features: Speeds drying time of all instant glues Can be pre-applied to surface or applied to exposed glue Stays active up to three minutes.
...more about the Hot Stuff Aerosol Accelerator 6 oz
|
|
|
|
|
|
This is 2oz bottle of Pacer Zip Kicker with Pump. Features: Will not craze most plastics Forces the immediate cure of all cyanoacrylates Expands gap filling ability Permits structural fillet forming Solves most tough-to-bond combinations of materials Safe for use with plastics.
...more about the Pacer Zip Kicker Pump 2 oz
|