|
|
This is a 5"x9" Template with Five Scales of Shapes and Rivet Placement Lines. Features: * Makes perfect panel lines, fuel caps, rivets, and other shapes to create scale markings on your warbirds and other models. * Included rulers provide accurate measurements for five scales of aircraft. * Ideal for use with the Top Flite Panel Line Pen.(TOPQ2510).
...more about the Top Flite Scale Warbird Template
|
This is the Coverite Pocket Thermometer designed to give you an instant reading of your sealing iron's exact temperature. This unit is placed on the sole of the iron's shoe after the iron has had time to heat. It clearly reads the iron's temperature from 50-500 degrees F (10-250 degrees C). Features: * Accurately reads covering iron temperature. * Eliminates up to 80% of problems like bubbles and sags caused by "guessing" at the correct temperature. * A few seconds with a Pocket Thermometer will save time, money, and frustration.
...more about the Coverite Pocket Thermometer
|
This is the Coverite Black Baron Sealing Iron used to apply fabric or film onto model airplane kits. It has a One Year Warranty. Features: * Uses 110V power source and reaches between up to 475 degrees F. * 165 Watts of power. * Advanced wing design: the specially-designed "wings" allow easy bonding of covering, even on convex corners such as fillets and tail joints. * Thermostatically controlled; just dial thermostat to desired setting to maintain even and constant heat. Thermostat features. * ON/OFF switch. * Non-stick coating ensures long-life use and allows iron to glide over covering material without scratching. * One piece formed steel handle and shoe jointing plate t
...more about the Coverite Black Baron Sealing Iron
|
This is Coverite's Replacement Shoe For Their Black Baron Sealing Iron. Features: * Sealing Iron Reaches a Full 475 Degrees Fahrenheit. * It has a Temperature-Adjustable Knob to Accomodate any Film or Fabric Covering. * Its Side "Roll-Bars" can Actually Roll the Iron into Fillets. * The Flat Sole is for Normal Sheeted Surfaces and Open Structures. * The Toe is Slightly Rounded to reach those tight corners Without ""digging in''. * Shoe is Coated with Scratch-Resistant 100% Blackstone.
...more about the Coverite Blackbaron Replacement Shoe
|
This is the Coverite 21st Century Iron used to apply fabric or film onto model airplane kits. One Year Warranty. Features: * Uses 110V power source for the US market. * Advanced built-in solid-state thermostat maintains heat within. * 3 degrees F (1.7 degree C) of dial setting.(Temp chart on box). * Temperature range of 150 to 410 degree F (65 - 210 degree C). * Unique iron w/upswept "wings" on the sides for fillets & under cambers without gouging the underlying surface or your covering. * When the iron reaches the dialed-in temperature, the temperature procesing indicator light begins to blink. * 100% blackstone shoe coating resists scratches & adhesive buildup.
...more about the Coverite 21st Century Sealing Iron
|
This is the Coverite 21st Century Iron used to apply fabric or film onto model airplane kits. One Year Warranty. This 220/240V heat sealing iron is used overseas such as Europe or anywhere that 220/240V power source is used. Features: * Uses 220/240V power source for overseas markets. * Advanced built-in solid-state thermostat maintains heat within. * 3 degrees F (1.7 degree C) of dial setting.(Temp chart on box). * Temperature range of 150 to 410 degree F (65 - 210 degree C). * Unique iron w/upswept "wings" on the sides for fillets & under cambers without gouging the underlying surface or your covering. * When the iron reaches the dialed-in temperature, the temperature pro
...more about the Coverite 21st Century Iron 220/240V
|
|
Hobbico's Deluxe Heat Gun. This handy tool gives you a fast, drum-tight, mirror smooth finish. It's ideal for MonoKote, EconoKote and other heat-shrinkable covering films. Get a professional finish with less time and effort. Features: * Adjustable air in-take, which allows for easy adjustment of air temperature. * Three position push button switch; On-Off-Cool. * Variable heat nozzle for narrow or broad airflow. * 1000 WATTS of Power. * Powerful motor/fan combination, for steady airflow over surface. * Quiet, low-noise, lightweight design with comfortable black plastic handle. * One year warranty.
...more about the Hobbico Deluxe Heat Gun
|
This is the Hobbico Custom Sealing Iron used to apply Fabric or Film onto model airplane kits. It has a One Year Warranty. There are no instructions with this, the customer should follow the directions on the covering itself. Features: * Uses 110V power source and reaches between 100 to 350 degrees F. * 170 Watts of power. * Advanced wing design: the specially-designed "wings" allow easy bonding of covering, even on convex corners such as fillets and tail joints. * Thermostatically controlled, just dial thermostat to desired setting to maintain even and constant heat. Thermostat features ON/OFF switch. * Non-stick coating ensures long-life use and allows iron to glide over
...more about the Hobbico Custom Sealing Iron
|
This is the Eversharp Film Trimmer from Higley. Features: * Uses inexpensive razor blades. * Makes perfect lap joints in any plastic film covering. * Machined from solid aluminum bar stock. * The film travels in one of eight slots-which gives you eight positions on the razor edge to dull. * Turn the blade over and you have eight more!
...more about the Harry B. Higley Eversharp Film Trimmer
|
This Top Flite Heat Gun is a handy tool that gives you a fast, drum-tight, mirror smooth finish. It's ideal for MonoKote, EconoKote and other heat- shrinkable covering films to get a professional finish with less time & effort. This heat gun has a One-Year Warranty. Features: * Adjustable air in-take, which allows for easy adjustment of air temperature. * Three position push button switch; On-Off-Cool. * Variable heat nozzle for narrow or broad airflow. * 1000 WATTS of power. * Powerful motor/fan combination, for steady airflow over surface. * Quiet, low-noise, lightweight design with comfortable black plastic handle.
...more about the Top Flite Heat Gun
|
This is the Top Flite Sealing Iron used to apply fabric or film onto model airplane kits. It has a Two-Year Warranty. Features: * Uses 110V power source and reaches between 100 to 350 degrees F. * 165 Watts of power. * Advanced wing design: the specially-designed "wings" allow easy bonding of covering, even on convex corners such as fillets and tail joints. * Thermostatically controlled, just dial thermostat to desired setting to maintain even and constant heat. Thermostat has ON/OFF switch. * Non-stick coating ensures long-life use and allows iron to glide over covering material without scratching. * One piece formed steel handle and shoe jointing plate that will never sep
...more about the Top Flite Sealing Iron
|
The Woodpecker is a tool designed to keep air bubbles from forming beneath film covering (such as MonoKote, Ultracote, etc). It prevent air pockets from forming between covering and wood or from between two layers of film. The tool has four wheels with VERY sharp tines that make small, short slices in wood and/or covering to release the trapped air that causes bubbles in film covering. The wheels are removable to make the work area of the tool narrower (for corners, etc). Constructed entirely of stainless steel and the handle is rubber covered for comfort and grip.
...more about the Top Flite WoodPecker Covering Tool
|
This is the Top Flite Trim Seal Tool with flat and rounded detail shoes. This is used to apply detail covering or stripes onto your airplane. Features: * Great for hard to reach places using specially designed tips for fillets, curves, and corners. * High and Low settings let you choose the best temperature for your covering material. * 2-year warranty.
...more about the Top Flite Trim Seal Tool
|
The Smartcut is Designed to give Modeler the Consistent Overlaps and Straight, Clean Edges that Create a Professional-Looking Covering Job. Features: * Durable Plastic Body with Molded-In Fingergrips. * Blade Depth Adjustments to Suit Any Covering Job. * Guide can be Reversed to Change From a 1/8" to 1/16" Overlap or Removed Completely to Reach Difficult Areas.
...more about the Top Flite SmartCut Trim Tool
|
Turn scrap MonoKote (or any covering) into perfectly matched and perfectly sized stripes. Top Flite's Smart Stripe Cutting Tool eliminates the need for ever having to buy striping tape again! NOTE-THE BLADES ARE TAPED TO THE LID OR BOTTOM FOR SAFETY. Features: * Makes fuelproof stripes that stick and stay stuck. * Ingenious cutting mechanism tracks perfectly straight and precision stainless steel adjustment allows for micro-fine width control. * Makes stripes as narrow as 1/64", as wide as 5-1/4". * Comes with one #11 blade, but may also use #10 and #12 blades. * 5-year limited warranty.
...more about the Top Flite SmartStripe Cutting Tool
|
This is a Top Flite Smart Stripe, Smart Cut & Knife, All-In-One-Gift Package. Features: * Convenient All-In-One Package Eliminates Guesswork. * Great for beginners or advanced modelers, having the Top Flite Smart- Stripe Stripe Cutting Tool, Smart-Cut Precision Cutting Tool and Hobbico Hobby Knife with Blades for cutting covering and detailing an airplane quickly with straight cuts. * High Quality Top Flite and Hobbico Products.
...more about the Top Flite SmartStripe/Cut & Knife Gift Pack
|
