|
|
Plastic Models → Plastic Model Airplanes → 1/40-1/49 Scale
|
Therefore in 1944, the F4U-1D was formally deployed as the first carrier based aircraft of Corsair series. Beginning by placing the F4U-1D as Marine squadrons VMF-124 and VMF-213 aboard the ESSEX on the way to the Philippines, the F4U-1D was used for attacking Japan as the first operation from U.S. Navy in 1945. About 3,700 amounts of F4U-1D were produced, then it held an established position from U.S. Navy because of its ability and reliance. Features: * Highly detailed exterior. * Extra fuel tank included. * Attaching canopy, wings, landing gear, and flaps. * Pilot standing on wing included.
...more about the Tamiya 1/48 Vought F4U-1D Corsair
|
|
|
Plastic Models → Plastic Model Airplanes → 1/70-1/79 Scale
|
This is a 1/72 Plastic North American P-51D Mustang Airplane from Tamiya's War Bird Collection Series. It's for ages 10 and over. Features: * Detailed 1/72nd scale for static display. * Ready to assemble precision model kit with fine recessed panel lines on fuselage and wings. * Detailed landing gear and wheel wells. * Detailed cockpit. * Choice of Dallas-built canopy or a normal canopy, each in the "bubble" design. * Two 75 gallon drop tanks. * 4-bladed propeller on nose. * Waterslide decals and detailed pictorial instructions.
...more about the Tamiya 1/72 North American P-51D Mustang
|
Assemble the North American P-51D Mustang 8th A.F. ACES with this 1:72 Scale Plastic Model Kit from Hasegawa Suitable for Ages 10 & Older. Features: * Accurately reproduced bomber escort as used with the U. S. 8th Air Force. * Built from high quality, injection molded gray parts with scribed surface panels lines. * Perfectly rendered cockpit shape and ventral radiator. * Optional standard or Dallas-built glazed canopy. * Two removable 75 gallon drop tanks. * Landing gear with intricately detailed wheel wells. * Detailed cockpit with detailed side wall panels. * Movable propeller. * Authentic waterslide decals printed by Cartograf. * Illustrated assembly guide.
...more about the Tamiya 1/72 N American P-51D 8th A.F. Aces
|
|
Plastic Models → Plastic Model Cars / Trucks / Vehicles → Up To 1/19 Scale
|
This is the 1/12 Scale Porsche 935 "Martini" Plastic Model Kit from Tamiya. Suitable for Ages 10 & Older. Features: Unassembled molded plastic display model Fully detailed 1/12 scale assembly kit Super detailed flat six engine Movable front and rear suspension Semi pneumatic rubber like tires Steerable front wheels Openable front hood, rear hood and doors Photo-etched parts included the radiator, brake discs and metal parts for seatbelts Waterslide decals for two different versions: 1: No. 1 Car Drivers: Jacky Ickx, Jochen Mass 2: No. 3 Car Drivers: Rolf Stommelen, Manfred Schurti.
...more about the Tamiya 1/12 Porsche 935 Martini w/Photo Etched Parts
|
|
|
Plastic Models → Plastic Model Cars / Trucks / Vehicles → 1/20-1/29 Scale
|
Drastic regulation changes for F-1 events, took effect starting the 1989 Formula-One racing season. One regulation banned turbo-charged engines, limiting cars to normally aspirated powerplants with a maximum displacement of 3.5 liters. To comply with the new regulations, the renowed Williams racing team, together with Renault, created the FW12C racing car for the '89 season, using Renault's V-10 cylinder type RS1 powerplant. Later that year the team introduced an improved FW13 racer, which placed 2nd in the constructor's title competition. This potent machine was further advanced for the 1990 season, by incorporating a new and compact Renault RS2 V-10 engine, and redesignated the FW13B. Chie
...more about the Tamiya 1/20 Williams FW-13B Renault
|
In the 2001 racing season Ferrari's new F2001 machine would capture the Constructors' and Drivers' Championships equipped with the longitudinally mounted 3000 Ferrari Tipo 050 V10 engine incorporating an electro-hydraulic 7-speed gearbox in pre-machined welded titanium. After the ban was lifted on traction control, launch control and other high-tech devices at the 5th race in Spain, the F2001 was finished with an arsenal of new equipment to further outclass rivals. By the 13th race Schumacher had already clutched the championship with 9 wins, earning him 53 total wins in his career, as he became the most successful F1 driver of all time and the Ferrari F2001 the undisputed top machine in F1
...more about the Tamiya 1/20 Ferrari F2001
|
|
Plastic Models → Plastic Model Cars / Trucks / Vehicles → Military
|
With approximately 50,000 units produced during WWII, the U.S. Armys series of M4 Sherman tanks were one of the driving forces behind Allied victory. Designed for efficient massproduction and including room for future modifications, the M4 series boasted superior ground performance with excellent reliability. Amongst the many variants produced, the early production M4 featured a 60 angular shaped welded hull and a cast turret loaded with a 75mm M3 cannon. With a 350hp air-cooled gasoline engine, Vertical Volute Spring (VVS) suspension and a 5-speed forward and reverse transmission, the M4 was capable of top speeds of up to 38.6km/h. Production began in July 1942, with 6,748 units produced
...more about the Tamiya 1/48 US M4 Sherman Early Production
|
This is the 1/48 Scale German Tank Destroyer Marder III from the Miliatry Miniature Series by Tamiya. Suitable for Ages 10 & Up. Features: Authentically reproduced in a compact 1/48 scale Accurately reproduced detailed open top superstructure Metal chassis weights for increased sense of mass Assembly type tracks with one-piece straight sections One crew figure Four types of markings included Illustrated instructions.
...more about the Tamiya 1/48 German Tank Destroyer Marder III
|
A 1/35 Plastic Japanese Medium Tank Type 97 (CHI-HA). Features: * Highly detailed exterior. * Two unassembled detailed figures with realistic expressions. * Tank contains an aerial spread around the vehicle top, unsymmetrical turret, complicated body front, and a seesaw-type suspension. * system. * Realistic rubber tracks. * Gunnary included for armament.
...more about the Tamiya 1/35 Japanese Tank Type 97
|
This is a Plastic 1/35 WWII German Tiger I Early Production Tank. Features: * Detailed assembly and painting instructions included. * Designation: Panzerkampfwagen VI Ausfuhrung E (SD.Kfz.181) early- production. * WWII German heavy tank with 88mm main gun. * Highly detailed 1/35th scale plastic kit for static display. * Over 200 parts in dark grey plastic. * 1 tank commander figure. * Separate suspension arms for road wheels. * External details: towing cables, shovels, hammers, axe, and track links. * Optional position turret hatches and some interior turret detail - gun breech and seats. * Tracks are single piece flexible rubber for easy installation.
...more about the Tamiya 1/35 German Tiger I Early Production
|
This is the 1/35 scale German Panzerkampfwagen II Ausf.A/B/D (Sd.Kfz.121) (French Campaign) from the Miliatry Miniature Series #292 by Tamiya Modeling skills helpful if under 10 years of age. Features: Highly detailed plastic pieces molded in dark grey Accurately depicts distinctive features such as armored panels for each variant Gun turret and hatch are separately molded Photo etched parts included for muffler mesh Includes marking for the following: 6th Panzer Division, France, 1940 35th Panzer Reginment, 4th Panzer Division, France, 1940 6th Panzer Division, France, 1940 (different) 36th Panzer Division, 4th Panzer Division, France, 1940 Illustrated instructions with pa
...more about the Tamiya 1/35 German PZKPFW II Ausf.A/B/C Sd.Kfz 121
|
|
|
Plastic Models → Figures → Military
|
These are WWII German Tank Crew Field Maintenance Figures from Tamiya Suitable for Ages 8 & Older. Features: * Exquisitely detailed, partially assembled figures molded in a variety of realistic action poses: * ammunition loading (4) * tire repair (1) * Engine maintenance (2) * painting (1) * supervisor (1) A large variety of accurately reproduced accessories such as: 88mm ammunition (and wooden cases) for King Tiger, Tiger I, Panther, and Pz. kpfw. IV. * Beautifully reproduced tools including: hammer, bucket, anvil, tool box, tool bag, ladder, jack, vise and more. * Illustrated assembly guide.
...more about the Tamiya 1/48 WWII Grmn Tnk Crew Fld Maint Set
|
|
|
Plastic Models → Dioramas → Military
|
This is a Plastic 1/35 Barricade Set from Tamiya. For modelers 10 years of age and up. Features: * Plastic pieces attached to sprues and molded in dark green. * Ready to assemble plastic model kit. * Pieces included for rolled barbed wire infantry obatacle, prepared barbed wire defence, and anti-tank obstacles. * Highly detailed logs. * Pictorial instructions.
...more about the Tamiya 1/35 Barricade Set
|
This is a 1/35 Scale Plastic Military Miniature German Infantry Weapons Set from Tamiya. This kit is for modelers age 10 and over. Features: * Detailed plastic parts molded in silver and attached to sprue trees. * Partial list of weapons and accessories included. * -Machine gun with flak tripod. * -Luger P-08. * -Walther P-38. * -Walther signal pistol. * -MP 44 Assault rifle with magazine pouch. * -Ammunition box. * -Machine gunners accessory pouch. * -Magnetic hollow charge anti-tank mine. * -Mushroom head tellermine M43. * -Steel tellermine M35. * -Drum magazine and drum magazine case. * -Machine gun 34 (dual-purpose machine gun M1934). * -Machine gun M42 (dual-purpose ma
...more about the Tamiya 1/35 German Infantry Weapons
|
|
Plastic Models → Paint → Acrylic
|
23ml Jar of Tamiya X-25 Clear Green color Acrylic Gloss Paint. Features: * Can be used on styrol resins, styrofoam, wood, plus all of the common model plastics. * Covers well, flows smoothly with no blushing or fading, and can be blended easily.
...more about the Tamiya Acrylic X25 Clear Green 3/4 oz
|
23ml Jar of Tamiya XF-15 Flesh color Acrylic Flat (Matt) Paint. Features: * Can be used on styrol resins, styrofoam, wood, plus all of the common model plastics. * Covers well, flows smoothly with no blushing or fading, and can be blended easily.
...more about the Tamiya Acrylic XF15 Flat Flesh 3/4 oz
|
100ml Can of Tamiya AS-14 Olive Green (USAF) Synthetic Lacquer Spray Paint. Features: * Specially developed for finishing aircraft models. The color is formulated to provide the authentic tone to 1/32 & 1/48 scale model aircraft. * Subtle shades can easily be obtained on your models by simple spray strokes. * The paint is a synthetic lacquer that cures in a short period of time. * Extremely useful for painting large surfaces.
...more about the Tamiya AS-14 Spray Olive Green (USAF) 3 oz
|
100ml Can of Tamiya AS-17 Dark Green (IJA) Synthetic Lacquer Spray Paint. Features: * Specially developed for finishing aircraft models. The color is formulated to provide the authentic tone to 1/32 & 1/48 scale model aircraft. * Subtle shades can easily be obtained on your models by simple spray strokes. * The paint is a synthetic lacquer that cures in a short period of time. * Extremely useful for painting large surfaces.
...more about the Tamiya AS-17 Spray Dark Green (IJA) 3 oz
|
|
|
|
|
Plastic Models → Paint → Polycarbonate
|
100ml Can of Tamiya Copper Polycarbonate Spray Paint. Features: These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
...more about the Tamiya PS-14 Polycarbonate Spray Copper 3 oz
|
100ml Can of Tamiya Metal Red Polycarbonate Spray Paint. Features: These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
...more about the Tamiya PS-15 Polycarb Spray Metal Red 3 oz
|
100ml Can of Tamiya Racing Green Polycarbonate Spray Paint. Features: These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
...more about the Tamiya PS-22 Polycarbonate Spray Racing Green 3 oz
|
100ml Can of Tamiya Brilliant Blue Polycarbonate Spray Paint. Features: These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
...more about the Tamiya PS-30 Polycarbonate Spray Brilliant Blue 3 oz
|
100ml Can of Tamiya Bright Red Polycarbonate Spray Paint. Features: These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
...more about the Tamiya PS-34 Polycarbonate Spray Bright Red 3 oz
|
100ml Can of Tamiya Translucent Silver Polycarbonate Spray Paint. Features: These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
...more about the Tamiya PS-36 Polycarbonate Spray Translucent Silver 3 oz
|
100ml Can of Tamiya Bright Silver Polycarbonate Spray Paint. Features: These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
...more about the Tamiya PS-41 Polycarb Spray Bright Silver 3 oz
|
|
|
Plastic Models → Paint → Laquer
|
This is Tamiya TS-83 Metallic Silver Color Spray Lacquer for Plastic Models. For Adult Modelers Only. Features: Specially developed for decorating plastic models Synthetic lacquer cures in a short period of time Impervious to acrylic or enamel paints The color of the lid represents the color of paint.
...more about the Tamiya TS-83 Metallic Silver
|
|
