|
|
Plastic Models → Plastic Model Airplanes → 1/40-1/49 Scale
|
The Messerschmitt Bf109G-6 was one of the most numerous versions of this famous German WWII fighter aircraft. Known to its pilots as the ''Gustav'', it eventually served in all theatres where the Luftwaffe was active. The aircraft were also used to defend Germany against the American daylight bombing raids. The Bf109G-6 was also used extensively on the Eastern Front against the Soviet Air Force. 1/48th scale plastic kit for static display. 96 parts in grey and clear with
...more about the Academy Plastics 1/48 Bf109G-6 Messerschmitt
|
The Corsair was primarily used as an offensive fighter and ground attack aircraft. Initial versions had poor handling on aircraft carriers, so they served with the Marines off land-based airstrips. The huge propeller needed to absorb the power from the Pratt & Whitney R2800 engine, which led to the inverted gull wing design for acceptable propellor clearance. The F4U-1D featured a larger frameless canopy for improved visibility, but was otherwise similar to the initial
...more about the Academy Plastics 1/48 F4U-1D Corsair
|
The Republic P-47N was the last version of the the famous ''Jug''. It was designed specifically for the Pacific Theater and had extended wings to carry the fuel required for long distance escort missions over Japan. Detailed 1/48th scale for static display only. Markings included for one aircraft. 120 parts in light grey and clear with delicate recessed panel lines. Accurately reproduced 4-bladed propeller and spinner assembly. Detailed gun bays with optional covers and
...more about the Academy Plastics 1/48 P-47N Thunderbolt USA
|
The Spitfire Mk.XIV was the first mass produced Spitfire with the 35 liter Griffon engine in place of the smaller Merlin. The aircraft was used extensively in Europe after D-Day, and to shoot down V-1 ''buzz bombs''. Detailed 1/48th scale for stati c display only. Markings included for one aircraft with invasion stripes. 85 parts in light grey and clear with delicate recessed panel lines. Accurately reproduced 5-bladed propeller and spinner assembly. Detailed gun bays with
...more about the Academy Plastics 1/48 Spitfire MkXIV-C RAF
|
The Spitfire FR MkXIVe was a Spitfires XIV with a fuselage mounted camera and was optimized for low level maneuverability by clipping the wing tips. It was fitted with the ''universal'' e-wing. Detailed 1/48th scale for static display only. Marking s included for one aircraft. 85 parts in light grey and clear with delicate recessed panel lines. Accurately reproduced 5-bladed propeller and spinner assembly. Detailed gun bays with optional covers and optional position radiator
...more about the Academy Plastics 1/48 Spitfire MkXIV-E RAF
|
The F-86 Sabre was the most successful jet fighter of the post WWII era and one of the first to take advantage of the benefits of swept wing design. The Sabre saw extensive use in the Korean war, where it demonstrated a considerable edge over its p rimary rival, the Russian MiG-15, thanks to superior training and tactics. Over 5000 F-86's were built and saw use with the air forces of many nations including Canada, Japan, Great Britain, New Zealand, and Australia. 1/48th
...more about the Academy Plastics 1/48 F-86F-30 Sabre USAF
|
The MiG-21 Fishbed series has been one of the most produced and widely used jet fighter aircraft ever. The MiG-21 has good flight performance which is only hampered by its relatively short range. Nevertheless, the simplicity of the type's systems a nd construction has made it popular with the allies and satellites of the former Soviet Union. The MiG-21PF was an uprated version of the MiG-21F with a larger air intake and nose cone for the R1L ''Spin-Scan'' radar, as well as
...more about the Academy Plastics 1/48 MiG-21PF Fishbed USSR
|
When the tiny I-16 flew for the first time in 1933, it was far ahead of any other fighter design in the world, featuring retractable landing gear, a cantilever wing and variable pitch propeller. The Soviet 20mm cannon was the most powerful aircraft weapon in frontline service with any nation on the eve of WWII; it had a very high rate of fire and was extremely reliable. Medium grey plastic pieces molded to sprue trees. Clear pieces for windscreen included. Single seat
...more about the Academy Plastics 1/48 Polikarpov I-16 Type 18
|
The MiG-21 Fishbed series is one of the most produced and widely used jet fighter aircraft ever. The MiG-21 has good flight performance which is only hampered by its relatively short range. Nevertheless, the simplicity of the type's systems and con struction has made it popular with the allies and satellites of the former Soviet Union. The MiG-21MF version features an upgraded engine, improved avionics and more versatile weapons capability. 1/48th scale for static display
...more about the Academy Plastics 1/48 MiG-21MF Fishbed USSR
|
Plastic pieces attached to sprues and molded in grey. Modelers will enjoy the fine surface detail, such as bolt heads and metal seams, that decorate the exterior of the craft. The cockpit is complete with a seat, controls, and gauges. A detailed pr opeller assembly gives the craft a very life-like look. Authentically modeled landing gear includes gear bays that, when closely inspected, reveal incredible surface details. An optional antenna attaches to the top of the craft.
...more about the Academy Plastics 1/48 Bf109D Messerschmitt Early Version
|
Plastic pieces attached to sprues and molded in grey. The exterior of the craft is complete with fully engraved panel lines. Sports a highly detailed cockpit interior. Super detailed engine gives the craft a great sense of realism. Optional parts t o build the plan as the ''A'' or the ''C'' version. Weaponry includes a variety of bombs for dropping on enemy targets. Carefully designed landing gear is an exact replica of the real thing. Detailed pictorial instructions guide
...more about the Academy Plastics 1/48 P-26C Peashooter
|
Plastic pieces attached to sprues and molded in grey. The exterior of the craft is complete with fully engraved panel lines and rivet details. Sports a highly detailed cockpit interior. Meticulously crafted engine gives the plane an incredible sens e of realism. Canopy and landing gear covers may be modeled in flight or ground/ entry positions. Weaponry includes a variety of bombs for dropping on enemy targets. Carefully designed landing gear is an exact replica of the real
...more about the Academy Plastics 1/48 P-36C Curtiss
|
The P-40C Tomahawk is an early model of the Curtiss Wright P-40 series. The first flight of the Tomahawk was on April 10, 1941. It was equipped with a new fuel supplying system and much more advanced radio equipment. Of the 16,802 P-40s, 1,705 of t hem were the ''C'' type. Currently, only one of these historical craft has been restored and is being kept in flight condition. Plastic pieces attached to sprues and molded in light grey. The exterior of the craft is complete with
...more about the Academy Plastics 1/48 Curtiss P-40C Tomahawk
|
The F-86 Sabre first flew on October 1, 1947, with intent for use as a dive bomber or an escort fighter. The F-86 saw extensive use during the Korean War, where it was matched up against the feared Soviet-designed MiG-15. It was redesigned when com bat pointed out the limited maneuverability. The new F-86 version regained control of the Korean skies and maintained an enormous advantage over the MiG-15. This F-86F Sabre is built from olive gray plastic pieces which are molded
...more about the Academy Plastics 1/48 F-86F Sabre
|
The Lockheed T-33A ''Shooting Star'' was the trainer version of the F-80 fighter. It was America's first jet trainer and first entered service in 1948. The T-33A Trainer has taught many Air Force pilots basic fighter maneuvering skills. In addition to its use as a trainer, the T-33 has been used for such tasks as reconnaissance and drone conroller, and in some countries even as a combat aircraft. The T-33 is one of the world's best known aircraft, having served with the air
...more about the Academy Plastics 1/48 T-33A Shooting Star
|
Fully engraved panel lines and rivet details. Highly detailed two-seater cockpit interior. Detailed landing gear. Authentic engine assembly with propeller. One bomb. Authentic markings. Illustrated assembly guide. One plastic model. Assemble the F4 U-1 Corsair ''Birdcage'' with this 1/48 scale plastic model kit from Academy. Suitable for Ages 10 and Older. One Decal Sheet with Markings for Two Aircraft. 1; USMC F4U-1, VMF-222, Bougainville, December 1943. 2; USMC F4U-1,
...more about the Academy Plastics 1/48 F4U-1 Corsair Bird Cage
|
Without doubt, the P-47N was the biggest single-piston engined fighter ever manufactured and one of the fastest. The ''N'' only saw limited action in the European theatre, but it did contribute heavily to the air superiority the U.S. enjoyed in the Pacific. Its 2000 mile range enabled it to provide bomber support to the B-29s attacking Japan on a daily basis in 1945. Medium grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Single seat cockpit.
...more about the Academy Plastics 1/48 Republic P-47N
|
The Republic P-47 Thunderbolt was the largest and heaviest single-engine fighter to see service in WWII. In the early stages of the USAAF's campaign against ''Fortress Europe,'' the P-47 was the only fighter able to provide the bombers with an esco rt until the ultimate escort, the P-51 B & D Mustangs entered service. However, far from making them obsolete, this freed the P-47's to attack ground targets, a role they excelled at. Medium grey plastic pieces molded to sprue
...more about the Academy Plastics 1/48 P-47D Nose Art
|
Fully engraved panel line and rivet details. Highly detailed cockpit interior. Model as a P-38J, P-38J Droopsnoot, P-38L Pathfinder, or a F-5E Photo Recon. HVAR, bombs, drop tanks, and rocket launchers. Detailed landing gear with black PVC tires. H ighly detailed landing gear compartment. Accurate waterslide decals with illustrated placement guide. Easy to follow, illustrated assembly instructions. One Plastic Model. Assemble the P-38 Lightning with this 1;48 Scale Plastic
...more about the Academy Plastics 1/48 P-38 Lightning
|
|
|
Plastic Models → Plastic Model Airplanes → 1/70-1/79 Scale
|
The North American AT-6 Texan is the most widely used trainer aircraft ever made. In addition to the U.S. Air Force and Navy, the Texan has been used by dozens of countries to provide future pilots with their first flying experiences. Today many of these aircraft are in private hands and can be seen at air shows around the world. Less well known, is that the Texan was used by the French in Algeria as an counter-insurgency aircraft armed with guns and rocket pods. The T-6G
...more about the Academy Plastics 1/72 T-6G Texan
|
The French built SPAD XIII was one of the most famous fighters of World War I. The SPAD used a liquid-cooled inline engine when most aircraft were equipped with rotary engines. A powerful and efficient craft, the SPAD was used for many years. Armed with one or two Vickers 7.65 mm machine guns firing through the propeller arc or a deadly 37mm Hotchkiss cannon, the SPAD was widely feared. Plastic pieces attached to sprues and molded in grey. The exterior surface of the plane
...more about the Academy Plastics 1/72 SPAD XIII WWI RAF
|
New tooling!. Exquisitely reproduced ''Allison Engine'' version with a high level of detail and scale accuracy. Equipped with a ''Hispano Suiza'' 20mm cannon & reconnaissance camera. Micro-molded panel lines and rivet details. Detailed cockpit rior with clear canopy. Detailed landing gear and bays. A separate U.S. light utility vehicle (Jeep) and trailer. Authentic waterslide decal markings. Aircraft display stand. Illustrated assembly guide. (1) Plastic Model. Assemble
...more about the Academy Plastics 1/72 P-51 Mustang North Africa
|
Accurately reproduced static display model with fully engraved panel lines and rivet details. Detailed cockpit interior and clear canopy. Detailed landing gear. Realistically molded external loads. Waterslide decals. Illustrated assembly guide. (1) Plastic Model. Assemble an A-10A ''Operation Iraqi Freedom'' with this 1;72 Scale Plastic Model Kit from Academy. Suitable for Ages 10 & Older. One Waterslide Decal Sheet with Markings for 2 Aircraft Versions. 1; Capt. Kim
...more about the Academy Plastics 1/72 A-10A Plane Iraq
|
Accurately reproduced static display model with fully engraved panel lines and rivet details. Detailed cockpit interior with clear canopy. Detailed landing gear and bays. Authentic waterslide decal markings. Illustrated assembly guide. (1) Plastic Model. Assemble a F-89D Scorpion with this 1;72 Scale Plastic Model Kit from Academy. Suitable for Ages 10 & Older. One Waterslide Decal Sheet with Markings for 2 USAF Versions. 1; 61st FIS, Ernest Harmon, AFB, Newfoundland, 1995.
...more about the Academy Plastics 1/72 F-89D Scorpion
|
A re-released kit with retooled wings to reflect the extended wingtips on some of the tank-plinking Stukas. Injection molded plastic parts with scribed panel lines and rivet details. Nicely detailed 37mm Flak gunpods mounted just outboard of the ma in gear. Meticulous attention paid to the interior walls. Choice of open or closed canopy. Detailed cockpit and landing gear. Waterslide decals. Illustrated assembly guide. (1) Plastic Model. Assemble the Junkers Ju 87G-2 Stuka
...more about the Academy Plastics 1/72 JU87G-2 Stuka Kanonen Vogel
|
This static display model of ''The Fork-Tailed Devil'' is realistically reproduced with highly detailed, injection molded plastic parts including scribed surface details. Highly detailed cockpit with intricately detailed side walls and control pane l. Multiple clear canopy parts give you the option of displaying it in open or closed position. The main wheel wells are complete with the plumbing and duct details. Detailed landing gear struts. Optional bazooka rocket launchers,
...more about the Academy Plastics 1/72 P-38J Lightning
|
A highly detailed static display model, realistically depicting the two-seat scout and dive bomber for the US Navy. Rotating 4-blade propeller. Detailed weapons bay interior loaded with two bombs. The zero length rocket launcher stubs are molded di rectly to the underside of the wings. _ The rear gunner cockpit is armed with twin machine guns and armor plating. Nicely detailed landing gear struts and bay interiors. Engine details. Highly detailed pilot cockpit. Authentic
...more about the Academy Plastics 1/72 SB2-C Helldiver
|
Limited Edition. An accurate depiction of the last of the French Navy fighters to be designed with guns as its primary air-to-air weapons. Exquisitely detailed cockpit including ejection seat. Nicely detailed landing gear struts. Wheel bays with me ticulous detail. Engine duct top under the main wing. Positionable horizontal stabilizers. Airbrake may be fixed in the open or closed position. Optional external stores. Cartograf premium quality, waterslide decals. Illustrated
...more about the Academy Plastics 1/72 F-8P Crusader ''FN Special''
|
Finely engraved panel lines & rivet details Highly detailed cockpit & landing gear bay Authentic markings included Nicely detailed landing gear struts and bay interiors Detailed pilot cockpit Waterslide decals Illustrated assembly guide. (1 c Model. Plastic Model Kit from Academy. Suitable for Ages 14 & Older. One Decal Sheets with Markings for 12 Versions. 1; Me262A-1a, W.Nr.111918, III./JG7. 2; Me262C-1a (V186), W.Nr.130186, Obstit, Heinz Bar, III./EJG2, March
...more about the Academy Plastics 1/72 Messerschmitt Me262A-1a
|
|
