One of the most nimble helicopters in service today is the Hughes Model 500. This machine is a development of the U.S. Army's OH-6A Cayuse which proved so valuable as an observation and attack helicopter in the vietnam war. The Model 500 is modifie d with a ''T'' type tail and a five-blade rotor for more quiet operation. The spritely defender can carry nearly all military equipment designed for helicopters. Plastic pieces attached to sprues and molded in tan and grey. The
...more about the Academy Plastics 1/48 Hughes 500D Tow Heli
|
 Great Gift Idea
The deep black of a moonless Persian Gulf night shielded a small gunboat from detection. Silently creeping through the dark waters, the small boat was desiring to prey on defenseless oil tankers. The ships crewmen were secure in the knowledge that they were invisible to the eyes of the tankers. However, without any warning, violent explosions ripped across the surface of the small gunboat. The MH-6 Night Hawk had struck!. Plastic pieces attached to sprues and molded in
...more about the Academy Plastics 1/48 MH-6 Helicopter
|
An accurate reproduction of the US Navy rescue helicopter, from the deck of the USS Camden with the unique Stars & Stripes decal decoration (other authentic schemes provided). Intricately detailed hub and twin rotor assemblies. Amazingly detail ockpit. Incredibly detailed cargo compartment with choice of troop seats or medivac litters; machine guns and stowage box. Rear loading ramp and door can be fixed in the open or closed position, as well as the side crew entry
...more about the Academy Plastics 1/48 CH/HH-46D Sea Knight US Navy
|
An accurate reproduction of the heaviest and most powerful helicopter in service with the US Marines (1981). Exquisitely detailed rotor head. Realistically molded rotor blades can be modeled in the folded or flight position. Tail section also can b e modeled in the folded or flight position. Amazingly detailed cockpit including control panel. Incredibly detailed cargo compartment with padded walls, avionics and wall-mounted stretchers. Rear loading ramp door can be fixed in
...more about the Academy Plastics 1/48 CH-53E Super Sea Stallion Marines
|
A stunning model replica engineered with exquisite surface detail! Additional parts provided giving the option to build either the short (A) or long (D) tail version. Dual rotor chopper with exquisitely detailed rotor heads! Movable propellers. Ama zingly detailed cockpit including control panel. Incredibly detailed cargo compartment with padded walls, avionics and wall-mounted troop seats which can be modeled in the extended or retracted position. Rear loading ramp door can
...more about the Academy Plastics 1/48 CH-46A/D USMC/Vietnam Heli
|
|
The AH-64 Apache is specifically designed for attacking and destroying enemy armour. It is armed with a rapid firing 30mm chain gun, Stinger and Hellfire missiles. The Apache operates in all types of weather. Detailed 1/48th scale for static displa y only. Markings included for one aircraft. Over 150 parts in olive green and clear with delicate recessed panel lines. Accurately reproduced rotor head, 4-blade rotor system, and mast radome. Detailed tail rotor, landing gear,
...more about the Academy Plastics 1/48 AH-64A Apache USA
|
The AH-64D Apache is specifically designed for attacking and destroying enemy armour. It is armed with a rapid firing 30mm chain gun, Stinger and Hellfire missiles. The D-model has upgraded avionics contained in larger fairings on each side of the cockpit. Detailed 1/48th scale for static display only. Markings included for one aircraft. Over 150 parts in olive green and clear with delicate recessed panel lines. Accurately reproduced rotor head, 4-blade rotor system, and
...more about the Academy Plastics 1/48 AH-64D Apache Longbow
|
The AH-64 Apache is specifically designed for attacking and destroying enemy armour. It is armed with a rapid firing 30mm chain gun, Stinger and Hellfire anti-tank missiles. Detailed 1/72nd scale for static display only. Markings included for one a ircraft. 98 parts in olive green and clear with delicate recessed panel lines. Accurately reproduced rotor head and 4-blade rotor system. Detailed tail rotor, landing gear, chain gun, and realistic PVC tires. Cockpit detail; one
...more about the Academy Plastics 1/72 Apache AH-64A USA
|
The powerful UH-60L Black Hawk is the current production model of the U.S. Army's rugged air assault and utility transport helicopter. More than 1,600 UH-60's have been delivered to the U.S. Army so far, and more than 400 Black Hawks serve the arme d forces of countries from Australia to Turkey. A quarter century after its first flight, Sikorsky's Black Hawk is a key element of American military power and ready to grow with tomorrow's airmobility needs. Medium grey plastic
...more about the Academy Plastics 1/35 UN-60L Blackhawk
|
The Cobra has become one of the most frightening airborne weapon platforms any enemy can face. This Super Cobra is the most powerful and lethal version to date and lays claim to being the most versatile helicopter gunship in the world. Super Cobras engaged numerous targets and proved themselves over and over again. Unassembled plastic parts molded in light gray, plus clear parts. Scale rivets, recessed panel lines, and extensive cockpit detailing. Engine panel doors and
...more about the Academy Plastics 1/35 AH-1W Super Cobra
|
Unassembled plastic parts molded in light gray, plus clear parts. Precise detailing of the cockpit and controls. One piece clear bubble canopy. 6-cylinder Franklin engine. Detailed rotor head assembly and windshrouds. Kit may be built as a rudiment ary gunship. Decals for U.S. Army gunship and U.S. Marine utility copter. Stretchers and a realistic pilot figure also included. Highly detailed, informative instructions. One 1/35 Bell 47D Mash Helicopter Model Kit. This is a
...more about the Academy Plastics 1/35 Bell 47D M.A.S.H. Heli
|
In the fall of 1987, Iran was an ever threatening presence to oil tankers in the Persian Gulf. The response to the threat, ''Operation Prime Chance,'' was Task Force 118. Prime Chance represented hand picked, highly experienced pilots, intense spec ial mission and gunnery training, water survival and specially modified, armed OH-58 Kiowa helicopters. Mast mounted sight (MMS). Extensive vertical and overhead cockpit detail. M50 machine gun with 500 round ammo can. Two sets of
...more about the Academy Plastics 1/35 OH-58D Kiowa Black Death
|
The Frog was a fearsome fighting machine. It carried a formidable range of weaponry, including side-mounted twin rocket pods and an M-5 40mm grenade launcher on its nose. MRC's UH-1C ''Huey'' Frog features the authentic markings of two Vietnam era sharks. You can choose to model either machine from the U.S. Army's 174th Assault Helicopter Company, the feared ''Ace of Spades'' or the colorful ''Surfer Girl''. Unassembled plastic parts molded in light gray, plus clear parts.
...more about the Academy Plastics 1/35 UH-1C Huey Frog Sharks
|
Armed OH-58D Warrior ''Make My Night'' crews were in their prime element after sundown. They took full advantage of the Mast Mounted Sight's infra-red ability to detect enemy activity while their deadly machines flew below enemy radar, all but invi sible to the unsuspecting enemy forces they targeted. Unassembled plastic parts molded in light gray, plus clear parts. Mast Mounted Sight (MMS). Extensive vertical and overhead cockpit detail. Overhead PDU (Pilot's Display Unit).
...more about the Academy Plastics 1/35 OH-58D Kiowa Warrior Thugs Heli
|
The UH-1C ''Huey'' Heavy Hog saw its combat tour through to the close of the Vietnam Conflict, deadly to the enemy and essential to U.S. forces in its capacity as a formidable gunship. Of all Bell's UH-1C machines, the Heavy Hog was the most heavil y armed, and was able to provide very effective cover and offensive firepower during unloading and recovery operations. Unassembled plastic parts molded in light gray, plus clear parts. Extensive cockpit details. Pilot and copilot
...more about the Academy Plastics 1/35 UH-1C Huey Heavy Hog
|
Bell HTL series helicopters were used by the U.S. Coast Guard for a wide variety of duties. The service received its first HTL from the Navy in 1947, after ordering an initial batch of ten aircraft. HTL's were often fitted with float gear and used for ice reconnaissance and search and rescue missions. Unassembled plastic parts molded in light gray. Extensive cockpit detail. Detailed engine and rotor. One piece clear canopy. Precise high quality decals. Pilot figure
...more about the Academy Plastics 1/35 Bell HTL-4 USCG Patrol Heli
|
Fully engraved panel line and rivet details. Extensive cockpit detailing. Detailed jet engine and rotor assembly. Detailed cabin with minigun, M-2 machine gun, magazine, auxiliary fuel tank, and gunner's seat. Detailed landing gear. Air intake and HIRS (Hover Infrared Suppressor System). Windshield wipers, IRCM, Radome, Satcom, IFR Probe. Internal rescue hoist. Clear plastic windows. With the decals, you have your choice of call and serial number. Easy to followo pictorial
...more about the Academy Plastics 1/35 MH-60G Pave Hawk
|
Fully engraved panel line and rivet details. Extensive cockpit detailing. Detailed jet engine and rotor assembly. Realistic M261-19 tube rocket launcher and M229 missile launcher. Minigun and auxiliary fuel tank. Detailed M-2 machine gun, FLIR, AGM -114 Hellfire, and M130 Chaff dispenser. Detailed landing gear, IFR probe, and HIRSS. Accurate waterslide decals with illustrated placement guide. Easy to follow, illustrated assembly instructions. One Plastic Model. Assemble the
...more about the Academy Plastics 57095 1/35 AH-60L Blackhawk DAP
|
Accurately reproduced static display model with fully engraved panel lines and rivet details. Detailed cockpit interior and clear windscreen. Interior fuselage details include troop seats or litter. Highly detailed hub and rotor assembly. Rear load ing ramp may be modeled in open or closed position. Detailed landing gear. Authentic waterslide decal markings. Illustrated assembly guide. (1) Plastic Model. Assemble the Current U.S. Marines CH-46E Helicopter ''Bull Frog'' with
...more about the Academy Plastics 1226 1/48 CH-46E Bull Frog
|
