Plastic Models

The F-104C was developed as a tactical fighter for the Tactical Air Command of the USAF. Equipped with a refueling nozzle on the forward left side of the fuselage and special ''Boundary Layer Control'' (BLC) systems which increased the performanceof the flaps, 77 F-104C's were produced in total. 143 light grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Single seat cockpit. Recessed panel lines give authentic look. Detailed cockpit and landing .....
...more about the Hasagawa 1/48 F-104C Starfighter

Realistically reproduced exterior. Detailed cockpit including S-III-S seat. Gun pods, Sidewinders, Litening II, and drop tanks. Clear canopy. Detailed landing gear. Authentic decals and noseart. Easy to follow, illustrated assembly instructions. One Plastic Model. Assemble the AV-8B Harrier II Plus U.S.M.C. Attacker with this 1;48 Scale Plastic Model Kit from Hasegawa. Modeling Suitable for Ages 10 & Older. One Waterslide Decal Sheet for 2 USMC Aircraft Versions. 1; .....
...more about the Hasagawa 1/48 AV-8B Harrier II Plus Ace/Spades

119 medium grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Dual seat cockpit with pilot figures. Recessed panel lines give authentic look. Cockpit details include instrument panels, seats and control stick. Detailed landing gear with bay doors. 370 gallon and 600 gallon drop tanks. Detailed pictorial instructions. One Plastic Model Kit. This is a 1/48 Scale RF-4B Phantom II ''U.S.M.C.'' Plastic Model Kit from Hasegawa. One decal sheet with .....
...more about the Hasagawa 1/48 RF-4B Phantom II USMC

The F-16C Fighting Falcon is a tactical fighter developed from the F-16A PLUS. Since the decision to adopt the F-16 was first reached by the USAF, various improvements to the design were proposed as the aircraft was put through its paces. 134 medium grey plastic pieces attached to sprue trees. Clear pieces for canopy included. Single seat cockpit with pilot figure. Recessed panel lines give authentic look. Detailed cockpit and landing gear. Realistic afterburner. Two drop .....
...more about the Hasagawa 1/48 F-16CJ Falcon Misawa Japan

The A-4M was developed as a stopgap next-generation ground support air- craft to replace the U.S. Marine Corp's aging A-4, with the first production aircraft flying in April 1970. Fitted with the powerful J52-P-408A engine, the aircraft was capable of increased ordnance loads. The aircraft was visibly distinguishable from the older A-4 by its squared-off rudder, and also by the addition on later models of rudder-mounted RHAWS rear-warning radar. 146 medium grey plastic .....
...more about the Hasagawa 1/48 A-4M Skyhawk

Exquisite airframe surface details. Complete twin seat cockpit detail including consoles, walls and instrument panels with raised detail, Intricately detailed wheel wells and landing gear. Wing flaps may be modeled in up or down position. Nicely detailed payloads. Model the clear canopy in open or closed position. Boarding ladder. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the F/A-18F Super Hornet with this 1;48 Scale Plastic Model .....
...more about the Hasagawa 1/48 F/A-18F Super Hornet

Exquisite airframe surface details. Complete twin seat cockpit detail including consoles, walls and instrument panels with raised detail, Intricately detailed wheel wells and landing gear. Wing flaps and ailerons may be modeled in up or down position. Nicely detailed payloads and fuel tanks. Model the clear canopy in open or closed position. Boarding ladder. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the F/A-18E Super Hornet with .....
...more about the Hasagawa 1/48 F/A-18E Super Hornet

Realistically reproduced Luftwaffe/Italian Air Force trainer, built with highly detailed, injection molded polystyrene parts. Intricately detailed tandem cockpit. Multi-part clear canopy with rivet detail. Meticulously detailed landing gear wells and struts. Realistically molded wingtip tanks. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the TF-104G Starfighter with this 1;48 Scale Plastic Model Kit by Hasegawa Suitable for Ages 10 & .....
...more about the Hasagawa 1/48 TF-104G Starfighter

Exquisite airframe surface details Detailed cockpit Detailed nose and main landing gear Clear canopy Authentic waterslide decals Illustrated assembly guide. One plastic model. This is the 1/48 Scale J35F/J Draken Plastic Model Kit from Hasegawa. Suitable for Ages 10 & Older. One decal sheet with markings for 3 versions. 1) Swedish Air Force Div.3/F10 J35F-2. 2) Swedish Air Force F10 F35J. 3) Swedish Air Force Div.2/F10 .....
...more about the Hasagawa 1/48 J35F/J Draken Swedish AF P Series

During the early phases of WWII the German Ju87 Stuka was one of the most feared aerial weapons and it played a large role in the German Army's blitzkreig through Poland and western Europe. After the types failure in the Battle of Britain the Ju87was redesigned to be more aerodynamic the new version being the Ju87D. The Ju87G was essentially a D-model fitted with underwing cannons which were highly effective against Soviet armour. Detailed 1/48th scale plastic kit for .....
...more about the Hasagawa 1/48 Ju87G-2 Stuka

Gray molded airframe parts with realistic surface details. Complete cockpit detail including control panel, magazines, throttle lever, stored machine gun, and more!. Detailed landing gear and engine. Bombs and arrester hook. Waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Aichi D3A1 Type 99 Carrier Dive Bomber (VAL) Model 11 with this 1;48 Scale Plastic Model Kit from Hasegawa. Suitable for Ages 10 & Older. One Decal Sheet with Markings for 2 .....
...more about the Hasagawa 1/48 Aichi D3A1 Type 99 Carrier Dive Bomber Val

Conceived as a fighter interceptor to supersede the Hurricane and Spitfire, the Typhoon became famous as a low level ground attack aircraft. This was thanks to it's heavy cannon armament and ability to carry up to 2000lbs of bombs or 8 rocket projectiles. The Typhoon was powered by a unique H-configured 24 cylinder Napier-Sabre engine rated at over 2,000 horsepower. The version in this kit is the late Mk.Ib with the teardrop canopy. 1/48th scale kit for static display. 83 .....
...more about the Hasagawa 1/48 Hawker Typhoon Mk.Ib RAF

Nakajima B6N2 TENZAN (''Jill'') Type 12 was designed to a IJN specification for a carrier-based attack plane with a top speed of 250 knots, range of 1800 nm, and a 1500 hp engine. The B6N2 was Nakajima's response to this specification, and while the airplane was impressive in its size and features, its Mamori engine proved unreliable. Eventually, the engine was replaced with the less powerful but more reliable Kasei engine and the B6N2 began to see service by the end of .....
...more about the Hasagawa 1/48 Nakajima B6N2 Carrier

78 total pieces. Plastic pieces molded in gray; clear pieces also included. Parts contain recessed panel lines for an authentic look. Detailed cockpit includes a rudder pedal, control stick, seat adjustment lever, gun sight, headrest, and realistic control panel. 7.7mm and 20mm machine guns. Auxiliary fuel tank. Waterslide decals. Pictorial instructions with informative information on plane's history and specs. One 1/48 Mitsubishi A6M5 Zero Fighter (Zeke) Type 52 Airplane. .....
...more about the Hasagawa 1/48 Mitsubishi A6M5 Zero

Gray molded airframe parts with realistic surface details. Highly detailed cockpit including control panel. Detailed landing gear and engine. Clear cockpit canopy. Auxilliary fuel tank. Waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Mitsubishi A6M5c Zero Fighter (ZEKE) Type 52 Hei with this 1;48 Scale Plastic Model Kit from Hasegawa. Suitable for Ages 10 & Older. One Decal Sheet with Markings for 2 Japanese Versions. 1; 203rd Naval Air .....
...more about the Hasagawa 1/48 A6M5 Zero Fighter Type 52 Zeke

The F4U-5 can be considered the ultimate model in the famous F4U Corsair series. It was the fastest propeller-driven fighter aircraft in the United States Navy. This Corsair is constructed of finely molded plastic parts. Single seat cockpit plane powered by one 4-blade propeller engine. Longer cowling area further exaggerates its stretched-out appearance. Detailed cockpit interior including decals for the instrument panel. Enlarged air intakes on the right and left .....
...more about the Hasagawa 1/48 F4U-5N Corsair

110 light grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Triple seat cockpit. Recessed panel lines give authentic look. Detailed cockpit and landing gear. Full armament package. Detailed pictorial instructions. One 1/48 Scale Nakajima B5N2 Type 97 Carrier Attack Bomber (Kate). Model 3 Plastic Model Kit. This is a 1/48 Scale Nakajima B5N2 Type 97 Carrier Attack Bomber (Kate) Model 3 Plastic Model Kit from Hasegawa. One decal sheet with markings .....
...more about the Hasagawa 1/48 Nakajima B5N2 Type 97 Prl Hrbr

The Mk.IX was built around a slightly modified Mk.Vc fuselage and powered by the Merlin 61 engine. These models included the low altitude ''LF'', the mid-altitude ''F'' and the high altitude ''HF''. While earlier models were fitted out with the Spit ''C'' wing armament layout, the latter half of the production run was fitted out with the ''E'' wing layout. 101 medium grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Single seat cockpit. Recessed .....
...more about the Hasagawa 1/48 Spitfire Mk IX

A static display model built with highly detailed, injection molded gray plastic parts. Complete surface detail with engraved panel lines. Interior wall and cockpit detail including control panel. Propeller can rotate after assembly. Highly detailed landing gear. 500 lb bomb and auxiliary fuel tank. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Curtiss P-40E Warhawk with this 1;48 Scale Plastic Model Kit from Hasegawa. Suitable .....
...more about the Hasagawa 1/48 Curtiss P-40E Warhawk USAF

A static display model built with highly detailed, injection molded gray plastic parts. Complete cockpit detail including walls and control panel. Positionable radiator exhaust door. Detailed engine and landing gear. Movable propeller. Wing mounted auxilary fuel tanks. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Kawasaki Ki6I-I Hei HIEN (TONY) with this 1;48 Scale Plastic Model Kit from Hasegawa. Suitable for Ages 10 & Older. .....
...more about the Hasagawa 1/48 Kawasaki Ki61-I Hei HIEN

Special Version kit. Realistically reproduced single seater fighter built with highly detailed, injection molded gray plastic parts. Complete surface detail with scribed panel lines. Detailed cockpit with clear canopy. Detailed engine with movablepropeller. Well-appointed landing gear struts. Pitot tube, MG151/20 20mm and MGFF 20mm machine cannons. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Focke-Wulf Fw190A-3 Plastic Model Kit .....
...more about the Hasagawa 1/48 Fockewulf FW190A-3

Originally ordered by Britain, the P-400 Airacobra differs from the P-39 mainly in armament - although rumors abound that the name comes from its ability to reach speeds of 400mph. Highly detailed cockpit made even more realistic with decals. Crisp, authentic detail throughout the model - riveting on seams, clear plastic cockpit doors, canopy, and wingtip navigation lights. Realistic fuel tanks and bombs included. Propeller detail includes decals for added realism. Display .....
...more about the Hasagawa 1/48 P-400 Airacobra New Tooling

A stunning model replica built with injection molded plastic parts, beautifully scribed with impressive details! Superb depiction of the cockpit, including the door panels. Cockpit doors can be displayed in the open or closed position. Landing gear bays detailed with all the plumbing! Highly detailed landing gear with weighted plastic tires. Engine cowling with openings for machine guns. Movable 3-blade propeller. Optional fuel tanks or bombs. Waterslide decals. Illustrated .....
...more about the Hasagawa 1/48 P-39Q/N Airacobra

Highly detailed, injection molded plastic parts Newly tooled under-main wing, drop tank rack, nose gun panel and upper cowling parts Authentic waterslide decals Illustrated assembly guide. One Plastic Model. This is the 1/48 Scale Focke-Wulf Fw190A-8 Luftwaffe Fighter Plastic Model Kit from Hasegawa Suitable for Ages 10 & Up. One Decal Sheet with Markings for 2 Versions;. 1) Luftwaffe 5.(Sturm)/JG300 UnterOffizier Ernst Schroder Red 19 Nov. 1944, Germany. 2) Luftwaffe JG2 .....
...more about the Hasagawa 1/48 Focke-Wulf Fw190A-8

The Lockheed Lightning was one of the unique fighter aircraft of WWII featuring a twin engine, twin boom, design. The aircraft served in all major theatres of the war and proved deadly to its adversaries in the hands of a skilled pilot. The highest scoring US ace, Major Richard Bong scored 40 victories over Japanese aircraft in various types of P-38. 1/48th scale for static display - Skill level 2. 144 parts in lt grey and clear with raised panel lines and rivets. Detailed .....
...more about the Hasagawa 1/48 P-38J Lightning

The J7W1 Shinden was developed by the Japanese in the closing months of WWII as an aircraft which would be effective against the ever more numerous American heavy bombers like the B-29. The aircraft employed a radical pusher configuration with theengine in the rear and also featured canards instead of a conventional tailplane. The prototype undertook three flight tests in August 1945 but the war ended before the types potential could be fully explored. 1/48th scale plastic .....
...more about the Hasagawa 1/48 Shinden

Single engine, carrier based, single seat fighter aircraft. The Corsair was primarily used as an offensive fighter and ground attack aircraft. It was powered by the Pratt & Whitney R-2800 radial engine which required the classic inverted gull wdesign for sufficient propeller propellor clearance. The F4U-4 was a late WWII version with a much increased load carrying capacity for ground-attack missions, including the ability to carry bombs and HVAR rockets. It was widely .....
...more about the Hasagawa 1/48 F4U-4 Corsair

North American P-51D Mustang. The P-51D, which was the premiere US fighter aircraft of WWII, was originally devoeloped in the remarkable time of 117 days in response to a request from the British Purchasing Commission. The first Mustangs were powered by Allison engines and had limited high altitude performance. But when the Allison was replaced with the Rolls-Royce Merlin the P-51 evolved into a superb long-range bomber escort. The definitive D-model is identified by its .....
...more about the Hasagawa 1/48 P-51D Mustang

The Republic P-47 Thunderbolt was the largest and heaviest single engine fighter to see service in WWII. In the early stages of the USAAF's campaign against ''Fortress Europe'' the P-47 was the only fighter able to provide the bombers with an escort until the ultimate escort, the P-51 B & D Mustangs entered service. However, far from making them obsolete this freed the P-47's to attack ground targets in which role they excelled. Detailed 1/48th scale for static display .....
...more about the Hasagawa 1/48 P-47D Thunderbolt

The Messerschmitt Bf109G-6 was one of the most numerous versions of this famous German WWII fighter aircraft. Known to its pilots as the ''Gustav'' it eventually served in all theatres were the Luftwaffe was active and the aircraft were also used to defend Germany against the American daylight bombing raids. Over 35,000 Bf109's of all types were built during the course of WWII. 1/48th scale plastic kit for static display. Ordnance includes; external fuel tank and underwing .....
...more about the Hasagawa 1/48 Messerschmitt Bf109