Plastic Models

Fully engraved panel lines and rivet details. Highly detailed two-seater cockpit interior. Detailed fixed landing gear. Two cannon guns in underwing pods. Two canopy styles to choose from; one-piece or sectioned. Authentic markings. Illustrated assembly guide. One Plastic Model. Assemble a Junkers JU87G-1 Stuka Dive Bomber ''Tank Buster'' with this 1/72 scale plastic model kit from Academy. Suitable for ages 10 and older. One Decal Sheet with Markings for Two Aircraft. 1; .....
...more about the Academy Plastics 1/72 JU87G-1 Stuka Tank Buster

Aerial reconnaissance has become one of the most important sources of strategic information for military planners. Where orbiting satellites are suitable for acquiring certain information, a piloted aircraft is much more versatile as a data gatherer. Early in the development of this mammoth spy platform, clandestine flights over various communist countries were executed. With its advanced surveillance gear, the SR-71 can scan thousands of miles of the Earth's surface every .....
...more about the Academy Plastics 1/72 Lockheed SR-71A Blackbird Drone

When the Japanese attacked the United States in 1941, the most modern fighter in the Navy was the Grumman F4F Wildcat. Although the Wildcat was small, it was not as fast or maneuverable as the Japanese Zero Fighter, but it was a very durable machine. However, in the hands of an experienced pilot, the Wildcat could best the feared Zero. Thankfully, the Grumman fighter was able to fend off the enemy until the more powerful Hellcat was available about one year later. 35 .....
...more about the Academy Plastics 1/72 F4F-4 Wildcat US Navy

The TBF-1 Avenger was available in sufficient numbers to be present for the outbreak of WWII despite the fact that it only made its first flight on August 1, 1941. The Avenger was especially popular because it could carry a full size submarine torpedo. This requires a weapons bay capable of carrying up to 2,000 pounds of bombs or other weapons. The Avenger also carried more defensive armament than many craft. The Avenger remained in use both during and after World War II. .....
...more about the Academy Plastics 1/72 TBF-1 Avenger USA

With the nickname ''Warthog,'' it's quite clear that the Fairchild A-10 is not a pretty aircraft. However, beauty was not a part of the concept behind this formidable airplane. One of the most deadly weapons to ever cruise the sky is found in the nose of the Warthog. It is a 30mm cannon capable of firing up to 70 rounds a second with a muzzle velocity of one 3/4 mile per second. The Warthog is designed to be able to return to base even when heavily damaged. Plastic pieces .....
...more about the Academy Plastics 1/72 Thunderbolt Warthog USAF

Optional position of canopy and landing gear door. Highly detailed cockpit interior. Fully engraved panel lines and rivet details. Choice of two different fuel tanks. Three blade propeller. Realistic landing gear. Authentic waterslide decals. Detailed pictorial instructions. One Messerschmitt BF109G-14. Assemble A Messerschmitt BF109G-14 with This 1/72 Scale Plastic Model Kit from Academy. Suitable for Ages 10 and Older. One Decal Sheet with Markings for Two Aircraft. 1; .....
...more about the Academy Plastics 1/72 Messerschmitt BF109G

One of the most familiar aircraft of the Second World War was the famous Curtiss P-40. Originally flown in 1938, the first P-40 was actually a modified P-36 using an inline allison engine instead of the P-36's bulky radial type. This modification gave the U.S. Army a craft that could compete with a Hurricane or a Messerschmitt. These were the planes that would become known as the British Flying Tigers. 46 plastic pieces attached to sprues and molded in grey. The surface of .....
...more about the Academy Plastics 1/72 Curtiss P-40B Tomahawk

The F4U was designed in 1938 to meet the U.S. Navy's need for a high-speed carrier-based fighter. The governing principle behind the design of this plane was to place the largest possible engine in the smallest frame. This changed the possible landing gear configurations and ultimately resulted in the introduction of the inverted gullwing. While the plane proved to be unsuitable for carrier operation, it was used extensively in a land-based role. Plastic pieces attached to .....
...more about the Academy Plastics 1/72 F4U-1 Corsair

The Fw190D-9 was developed to improve the high altitude performance of the otherwise aerodynamically sound Fw190A/F series airframe. This was accomplished by replacing the air-cooled BMW radial engine in the A/F with the liquid-cooled Junkers Jumo213A-1 powerplant which produced 1776hp. This engine lengthened the nose of the aircraft and was offset by inserting a plug in the rear fuselage to lengthen the tail. The Fw190D proved to be a superlative interceptor but by the .....
...more about the Academy Plastics 1/72 Focke-Wulf Fw190D-9

The Fi156 was the primary battlefield observation and reconnaissance aircraft of the German Air Force during WWII. Featuring a high aspect ratino wing with leading edge slats and flaps, the plane had excellent STOL (short take-off and landing) characteristics. A Storch piloted by German spy Otto Scorzny was used to rescue Italian dictator Mussolini in 1943. At the end of WWII, the French Morane-Saulnier company continued to produce the aircraft for the French Air Force. .....
...more about the Academy Plastics 1/72 FI-156 Storch/Morane-Saul

The North American AT-6 Texan is the most widely used trainer aircraft ever made. In addition to the U.S. Air Force and Navy, the Texan has been used by dozens of countries to provide future pilots with their first flying experiences. Today many of these aircraft are in private hands and can be seen at air shows around the world. Less well known, is that the Texan was used by the French in Algeria as an counter-insurgency aircraft armed with guns and rocket pods. The T-6G .....
...more about the Academy Plastics 1/72 T-6G Texan

The A-37 Dragonfly was developed from the T-37 primary jet trainer. This small aircraft is used as an anti-guerilla/counter-insurgency aircraft and it can carry a large array of weapons on its 8 underwing hardpoints. The A-37 also has a GAU-2B/A minigun as fixed armament. The A-37 is also used as a forward air control aircraft by the Air National Guard, which designates it as the OA-37B. Other users include the Republic of Korea Air Force. 1/72nd scale for static display .....
...more about the Academy Plastics 1/72 A-37B Dragonfly

Conceived by Sydney Camm to supersede the Hurricane as a fighter-interceptor, the Typhoon became famous as a low level ground attack aircraft. This was thanks to it's heavy cannon armament and ability to carry up to 2000lbs of bombs or 8 rocket projectiles. The Typhoon was powered by a unique H-configured 24 cylinder Napier-Sabre engine rated at over 2,000 horsepower. Typhoons played an important role in the D-Day invasions in Normandy with their attacks on German shipping .....
...more about the Academy Plastics 1/72 Hawker Typhoon 1B

The OV-10A Bronco was designed principally as a counter-insurgency aircraft which gives it the ability to perform high precision attacks on ground targets The aircraft also has a cargo compartment which can carry 5 paratroopers, or two stretchers and a medic. More recent versions of the aircraft have also been used in the forward air controller (FAC) directing other aircraft. A primary design feqture of the OV-10 is its twin boom layout and the aircraft is powered by a pair .....
...more about the Academy Plastics 1/72 OV-10A Bronco

The first Allison powered P-51's were good airplanes, yet they lacked high altitude effectiveness against bomber escorts. That changed when the basic P-51 airframe was mated with a Rolls-Royce Merlin engine to create the P-51B. This engine change resulted in a superb aircraft which many argue helped to change the course of WWII. Detailed 1/72 kit for static display only. 65 parts in green and clear with fine recessed panel lines. Accurately captures features of P-51B; .....
...more about the Academy Plastics 1/72 P-51B Mustang

The Curtiss P-40 was the only USAAF fighter available in quantity when the US entered WWII in 1941. By that time, the aircraft was almost obsolete compared to its adversaries, but soldiered on throughout the war as various improvements were made in its design. The P-40M and N variants were the last production models and were developed in an attempt to overcome some of the performance deficencies of the aircraft. The P-40N in particular underwent a major program of weight .....
...more about the Academy Plastics 1/72 P-40 M/N Warhawk

The Hawker Tempest was perhaps the ultimate British piston engined fighter developed during WWII. Similar in appearance to the Hawker Typhoon, the Tempest featured a much thinner laminar flow wing which gave much better overall performance. Tempests were used successfully during the last years of WWII ground attack aircraft, and for intercepting the German V-1 ''Buzz Bombs'' which were launched against London and South-East England. The Hawker Tempest was powered by a 2180 .....
...more about the Academy Plastics 1/72 Hawker Tempest

The Messerschmitt Bf109G-6 was one of the most numerous versions of this famous German WWII fighter aircraft. Known to its pilots as the ''Gustav'' it eventually served in all theatres were the Luftwaffe was active and the aircraft were also used to defend Germany against the American daylight bombing raids. The Bf109G-6 was powered by a Daimler-Benz DB605 inverted V-12 engine rated at 1,475hp and was typically armed with two 13mm MG131 guns in the upper cowl and one 20mm .....
...more about the Academy Plastics 1/72 Messerschmitt Bf-109

The Curtiss P-40 was the only USAAF fighter available in quantity when the US entered WWII in 1941. By that time, the aircraft was almost obsolete compared to its adversaries but soldiered on throughout the war as various improvements were made inits design. The P-40E gained fame through its use by Gen Claire Chennault's Flying Tigers in China but the aircraft also saw service across the globe from Alaska to N. Africa. Detailed 1/72nd scale kit for static display only. 59 .....
...more about the Academy Plastics 1/72 P-40E Warhawk

The A-37 Dragonfly was developed from the T-37 primary jet trainer. This small aircraft is used as an anti-guerilla/counter-insurgency aircraft and it can carry a large array of weapons on its 8 underwing hardpoints. The A-37 also has a GAU-2B/A minigun as fixed armament. The A-37 is also used as a forward air control aircraft by the Air National Guard, which designates it as the OA-37B. Other users of the aircraft include the Republic of Korea Air Force, whose ''Black .....
...more about the Academy Plastics 1/72 A-37B Black Eagle

Designed from the research of Dr. Alexander Lippisch, the Messerschmitt 163 Komet was designed as a way to stop the flood of allied bombers that were pouring into Germany towards the end of WWII. The Komet would reach an incredible speed of 596mphand climb at an outstanding 11,800 feet per minute. The craft was used to fly above Allied bomber groups and rain fire down on them from above and then, having used all of their fuel, they would glide back to base. Plastic pieces .....
...more about the Academy Plastics 1/72 Me-163B Komet

The failure of the F-111B to meet the requirements set forth by the Navy for their new basic fighter resulted in heated competition for a suitable carrier based plane. Variable-sweep wings were not a part of the new specifications, but Grumman proposed this still-new feature on their entry because of their experience with them. The capable production version could cut its width in half thanks to the inclusion of the variable-sweep wings. Plastic pieces attached to sprues .....
...more about the Academy Plastics 1/72 F-14A Tomcat USN

Medium grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Dual seat cockpit. Recessed panel lines give authentic look. Detailed cockpit and landing gear. Fully engraved panel lines and rivet details. Full armament package. Detailed pictorial instructions. One 1/72 Scale OV-10D Bronco ''Desert Storm'' Plastic Model Kit. This is a 1/72 Scale OV-10D Bronco ''Desert Storm'' Plastic Model Kit from Academy Hobby Models. One decal sheet with markings for .....
...more about the Academy Plastics 1/72 OV-10D Bronco

The North American F-86 Sabre was the first swept-wing airplane in the U.S. (1947). This combat fighter jet proved to be very successful against the Russian MiGs during the Korean War. It was designed as a day fighter or fighter bomber. Fully detailed plastic model with engraved panel lines. Detailed cockpit interior with clear canopy. Detailed landing gear and bays. Under wing fuel tanks. Authentic waterslide decals. Illustrated assembly instructions. One F-86E Sabre ''El .....
...more about the Academy Plastics 1/72 F-86E Sabre El Diablo

The P-47D was a workhorse of the U.S. Army Air Force during the last half of World War II, and saw action in both the European and Pacific theaters of the war. Although its 2000 hp R-2800 ''Double Wasp'' engine and exhaust turbine made the aircraft large and heavy, these proved to be no barrier to high performance, and it was utilized not only as an escort to U.S. bombers, but its bomb load capacity made it outstanding in the ground attack role. Medium Grey plastic pieces .....
...more about the Academy Plastics 1/72 Republic P-47D Thunderbolt Eileen

The B-17B was the first version of this famous aircraft to enter service. As such, it was vastly different from B-17's that operated at the end of WWII, with its gracefully tapered fuselage and none of the defensive armament for which the type would become famous. Detailed 1/72nd scale for static display only. Markings included for 1 aircraft. Appx. 140 parts in light grey and clear with delicate recessed panel lines. Detailed engine fronts and correct cowlings for B-17B. .....
...more about the Academy Plastics 1/72 B-17B Flying Fortress

The F-117A is built mostly of aluminum and some titanium. The flat angles, or facets, are designed to reflect radar everywhere except back to the transmitter receiver. The stealth is also covered with Radar Absorbent Material (RAM) to help ward off radar detection. The F-117A is powered by two General Electric F404-GE-F1D2 engines and carries all weaponry internally, including the 2,000 pound Mk.84 Smart Bombs which are included with this kit. Plastic pieces attached to .....
...more about the Academy Plastics 1/72 F-117A Stealth USAF

The modern jet fighter has become a technological wonder, filled with complex electronic gear. We have learned that the need for agility and effective flight at sub-sonic speeds is a must. The F-15C was designed to fill the role of the ''dogfighter''. Less complicated systems were used and nimble design was embraced. The Eagle carries one 20mm rotary cannon standard, and eight hardpoints to insure that ample weaponry is available. Plastic pieces attached to sprues and .....
...more about the Academy Plastics 1/72 F-15C Eagle USAF

Realistically engraved/raised panel lines and other body characteristics. Highly detailed cockpit interior. Clear cockpit canopy. Intakes and afterburners. Landing gear and ladder. Pylons with drop tank, Sidewinders and Sparrows. Authentic markings. Illustrated assembly guide. One Plastic Model. Assemble the McDonnell Douglas F-15D Eagle Modern Jet Fighter with this 1;72 Scale Plastic Model Kit from Academy. Skill Level; Experienced. One Waterslide Decal Sheet for 1 .....
...more about the Academy Plastics 1/72 Md F-15D Eagle

The F-15E is a version of the Eagle designed specifically for attacking ground targets. It has almost double the fuel capacity of a standard F-15 fighter and can carry a huge array of bombs and missiles. Detailed 1/72nd scale for static display only. Markings included for one aircraft. Over 150 parts in light grey and clear with delicate recessed panel lines. Accurately reproduced cockpit with 3 part ACES ejection seats, side console detail, and decal instrument panel .....
...more about the Academy Plastics 1/72 F-15E Strike Eagle USAF