Plastic Models

As WWII progressed and the Wehrmacht struggled to protect valuable ground forces, the need for an effective anti-aircraft weapon was high. General Heinz Guderian ordered the development of of such a weapon to protect Panzer divisions. Nicknamed the Mobelwagen for its box-like shape, this piece of German engineering was deadly. Plastic pieces attached to sprues and molded in tan. Ready to assemble precision model kit. Creates a highly accurate static display model. Features .....
...more about the Tamiya 1/35 German AA Gun Mobilwagen

Fathered from the designs of Dr. Ferdinand Porsche, the Kubelwagen Type 82 served the German military extensively during WWII. The Kubelwagen was chosen as the perfect vehicle for service in North Africa as it required no onboard cooling system, was easy to operate, and could be quickly modified to operate in the desert environment. Before the epic struggle of WWII came to a close, 51,000 Kubelwagen vehicles had been produced for military use. Plastic pieces attached to .....
...more about the Tamiya 1/35 German Kubelwagen Type 82 Africa

Plastic pieces attached to sprues and molded in tan and brown. Highly accurate static display model. Realistic exterior detailing and engine. Optional side panel. Tool storage hatch may be open or closed. Eight figures with authentic expressions and poses. Pneumatic rubber tires and detailed assembly tracks. Moveable front wheels with accurate treading. White string included for wire rope purposes. Waterslide decals. Detailed pictorial instructions. One 1/35 German Schwerer .....
...more about the Tamiya 1/35 German 18 Ton Half Track Famo

Accurately reproduced wedge-shaped add-on armour. Movable turret side add-on armour, driver's hatch, and gun mantlet armour cover. Includes commander figure. Plastic pieces molded in military green, and attached to sprues. Appliable rubber tracks.Mesh netting for turret basket. Detailed and authentic paneling. Sliding drivers hatch. Side skirt for protection. Rear view CCD camera mounted at the rear of the chassis. Versatile commanders parascope. Includes tow cables. .....
...more about the Tamiya 1/35 Leopard 2 A5 Battle Tank

Plastic pieces attached to sprues and molded in tan and brown. Highly accurate static display model. Realistic detailing of exterior and engine. Optional side panel. Tool storage hatch may be open or closed. Twelve figures with authentic expressions and poses. Pneumatic rubber tires and detailed assembly tracks. Front wheels of half-track and all wheels of trailer are steerable. Authentic link-type tracks. Rear bogie is removable from platform. White string included for .....
...more about the Tamiya 1/35 German 18 Ton Famo & Trnsprtr

Tan plastic pieces are highly detailed and attached to sprues. Pliable tracks add to authenticity. Highly accurate static display model. Complete exterior and loading breech detailing. Movable gun with gunsight. Seats and gun fixing clamp can be assembled in two positions. Includes two crew figures. Other realistic aspects of tank include wheels, fenders, upper hull, armor plating and interior. Tank accessories include gun cleaning rod, grouser box, smoke shell case, gas .....
...more about the Tamiya 1/35 German Tank Marder III

Highly accurate static display model. Complete suspension and accessory detailing. Five life-like figures included. Realistic one-piece flexible tracks. Tow hook in the rear. Bren machine guns and Enfield No.4 Mk.1 rifles. Detailed driver's panel.Separate equipment; knapsack, holsters, canteen, bayonet, ammo pouch, jerry can, stowage bin, ration box, shovel. String provided for tow cable. Window cable. Waterslide decals for four types. Great addition in making an .....
...more about the Tamiya 1/35 British Universal Carrier

Highly accurate static display model. Each piece is molded with realistic characteristics. Open or closed hatches for turret and hull. Two types of cupolas, wheels and sprockets can be selected. Four lifelike figures. Various accessories are provided such as; shovels, rifles, knives, helmets, gun holsters, water canteens, pouches, grenades, type K. rations, ammunition cases, oil cans, Jerry cans, machine gun tripod. and more. Continuous rubber-like tracks. Three types of .....
...more about the Tamiya 1/35 M4A3 Sherman 75mm

Highly accurate static display model. Each piece is molded with realistic characteristics. Realistically reproduced turret and turret parts. Open or closed hatches for turret and hull. Four lifelike figures. Various accessories are provided such as; shovels, rifles, knives, helmets, gun holsters, water canteens, pouches, grenades, type K. rations, ammunition cases, oil cans, Jerry cans, machine gun tripod. and more. Continuous rubber-like tracks. Three types of decals .....
...more about the Tamiya 1/35 M4A3 Sherman 105mm

Development of the massive King Tiger began in 1943 to counter the in- creasing threat of Russian tanks. A more powerful cannon was added and the front armor was 150mm thick with 80mm thick side armor. The turret was revised mid-way through production, from a stepped gun mantle to a smooth one. Due to the havoc wreaked by the King Tiger I during the final German offensive on the Ardennes front in December of 1944, the Allied forces that moved in on Berlin would fear the .....
...more about the Tamiya 1/35 German King Tiger

The U.S. Medium Tank M26 Pershing made its appearance at the end of WWII to allow the American Army to stand up to the wrath of German tanks. The Persh- ing, which was equipped with a long 90mm gun and exhibited incredible mobility, was first deployed to the European front in February 1945 as part of the effort to invade the German homeland. The Pershing successfully engaged the Tiger I and Pz.kpfw.IV tanks. When the Korean War began in 1950, the M26 also fought .....
...more about the Tamiya 1/35 US Med Tank M26 Pershing T26E3

Tan plastic pieces are highly detailed and attached to sprues. Pliable tracks add to authenticity. Highly accurate static display model. Complete exterior and loading breech detailing. Movable gun with gunsight. Seats and gun fixing clamp can be assembled in two positions. Includes one crew figure. Other realistic aspects of tank include wheels, fenders, upper hull, armor plating and interior. Tank accessories include gun cleaning rod, grouser box, smoke shell case, gas .....
...more about the Tamiya 1/35 German Tank Destroyer Marder III M

A ready to assemble precision model kit that is accurate in all details. Can be equipped with DShK-M anti-aircraft machine gun. Czechoslovakian and Polish production type can also be selected. Contains waterslide decals to allow the depiction of five versions of the T-55 tank to be displayed. Realistically molded commander figure. Continuous tracks. Detailed wheels and suspension. Upper hull parts including storage boxes, headlights and fuel drums. Realistic tow cables. .....
...more about the Tamiya 1/35 Soviet Tank T-55

The truck referred to as the Krupp Protze Kfz.69 was designed to tow a 3.7cm PAK 35/36 anti-tank gun and could hold one driver and five artillery crew. Both sides of the Protze could be fitted with ammunition cases. From the start of WWII, the Krupp Protze Kfz.69 was employed as standard equipment in anti-tank artillery divisions and was actively deployed to battlefields in France, Poland, the Balkans and Russia. Green and grey plastic parts are attached to sprue trees. .....
...more about the Tamiya 1/35 Krupp Protze 1T Tow Tk w/Gun Pk

Highly accurate static display model. Two types of bonnet vents and side mirrors. Semi-pneumatic tires. Driver and gunner figures. Four types of waterslide decal markings. Illustrated assembly and painting guide. (1) Plastic Model. Assemble a M1025 Humvee Armament Carrier with this Plastic Model Kit from Tamiya's 1;35 Military Miniature Series. Suitable for Age 10 & .....
...more about the Tamiya 1/35 Humvee M1025 Armament Carrier

An accurate representation of the M2A2 that was used on the front line in Iraq supporting the 3rd Armored Infantry Division as they pushed there way to Baghdad (2003). Laser range finder, GPS antenna, rear sensors and box exhaust have been accurately replicated. CIP (Combat Identification Panels) attached on both sides & the rear. Comes with option of two 25mm cannons. Commander and gunner half-figures detailed in body armor. Continuous flexible tracks. Fully loaded with .....
...more about the Tamiya 1/35 M2A2 Desert Storm IFV

An accurate representation of the M113A2 that was used in the Gulf War and ''Operation Iraqi Freedom''. Large trim vane, smoke shell launcher, and external fuel tanks have been accurately replicated. CIP (Combat Identification Panels) attached on both sides. Gun shield can be attached to M2 machine gun. Detailed Commander and driver figures. Continuous flexible tracks. Fully loaded with personal equipment, ammo cases and other necessary field equipment. Waterslide decals .....
...more about the Tamiya 1/35 M113A2 APC Desert Storm

The M1046 features a self-recovery winch in the front, reinforced doors and a TOW anti-tank missile launcher mounted on the roof. The TOW (Tube- launched, Optically tracked, Wire-guided) is an easy to operate advanced anti-tank missile launcher that has been deployed in over 40 countries since 1970. Sand-colored plastic parts are attached to sprue trees. Detailed molding of body panels and interior. TOW missile launcher is realistically replicated down to the loading .....
...more about the Tamiya 1/35 M1046 HMV TOW Missile Carrier

A scale static display replica of the M1A2 Abrams. Can also be built as M1A1HA or Marine Corps vehicle. A2 turret with CITV and new style vision block. Combat Identification Panels (CIP). Auxiliary Power Unit (APU) accessories. Commander's Independent Thermal Viewer (CITV). Realistic, continuous vinyl tracks. Bustle rack with mesh bottom. Commander and loader figures with realistic uniform details. Five sets of waterslide decals; 4 types of Desert versions, and 1 NATO .....
...more about the Tamiya 1/35 M1A2 Abrams 120mm Gun Tank

A scale static display replica of an upgraded version of the popular Sd.Kfz.222. Photo etched parts provided for a more realistic replication of the hatch. Turned aluminum gun barrel for 20mm main gun. Separate Jerry cans and drum cans. Driver figure with realistic uniform detail. Completely detailed hull surface including string for a more realistic tow cable. New waterslide decal markings based on the latest historical research. Illustrated assembly guide. (1) Plastic .....
...more about the Tamiya 1/35 German Armored Car SdKfz 222

A scale static display replica of the latest upgrade to the Leopard 2 with an accurately reproduced 55 caliber 120mm main gun. Mesh netting is supplied to more accurately reproduce the two storage buckets at the rear of the tank turret. Commander & loader half-body figures with realistic uniform detail. Detailed vinyl tracks. Goggles for the figures, headlights and tail lights are all reproduced using transparent parts for an even more realistic appearance. Completely .....
...more about the Tamiya 1/35 Leopard 2 A6 Main Battle Tank

The Challenger 2 features improved second generation Chobham armor capable of withstanding armor piercing and shape charge rounds. The fire control system was updated with the latest digital technology. The 120mm L30 rifled main gun provides improved muzzle velocity and accuracy, and enables the Challenger 2 to discharge armor piercing, HESH, smoke and depleted uranium rounds. Special modifications to tanks deployed to Iraq included reactive armor added to the front, .....
...more about the Tamiya 1/35 Brit Challenger 2

This kit is a highly detailed scale model of the JGSDF light armored vehicle used in Iraq. The unique form of the actual vehicle has been accurately replicated. One-piece die cast chassis. Semi-pneumatic synthetic rubber combat tires with realistic tread. Complete interior detail. Transparent parts create realistic headlights and tail lights. Model with doors in opened or closed position. 5.56mm MINIMI machine gun with special Iraq issue armored cover or regular hatch .....
...more about the Tamiya 1/35 Japan GSDF Lght Armrd Veh Iraq Unit

An authentic reproduction of the most cutting-edge of all 3rd generation main battle tanks! The high precision molding faithfully depicts the Leclerc Series 2's complex structure. Realisticlaly detailed turret basket, short and long snorkel, turret rear box and AC unit unique to the Series 2 tanks. Intricate rear hull detailing including rear panel grille, non-slip finish, engine grilles, tow cable, external fuel tanks, fuel tank pipe stay and fuel tank stays. Accurately .....
...more about the Tamiya 1/35 French Main Battle Tank Leclerc Series 2

An accurate depiction of the widely respected Ausf. B. Highly detailed swing-arm type suspension that can be made movable. Metal suspension springs. Aluminum gun barrel. Well-defined vinyl tracks. Detailed fighting compartment bulkhead. Separate inspection hatches and engine access hatches. Side engine intakes with etched intake screens. Front head light housings with separate etched front flap. Driver's vision port can be fixed in the open or closed position. Interior .....
...more about the Tamiya 1/35 German Sturmgeschutz III Ausf B

Precisely detailed static display models built with high quality injection molded polystyrene parts. Elevating 75mm howitzer. Rotating turret with elevating 47mm anti-tank gun. Rotating driver's and Commander's periscope. Detailed Commander figuresits freely in the opened hatch. Exquisitely detailed side armor panels covering suspension mechanisms Slide moled hull with accurately depicted hex bolts. Choice of two types of fenders and exhausts. Rolling suspension parts. .....
...more about the Tamiya 1/35 French Battle Tank B1 bis

Precisely detailed static display model built with high quality injection molded, desert yellow polystyrene parts. 8 meticulously detailed figures in tropical Africa Corps uniforms. Realistic 88mm gun with an unbelievable amount of detail and movable parts allowing it to traverse and elevate. Meticulous details on the cradle, gun mount and breech. Movable outriggers and traveling lock. The gun can be modeled in firing or traveling position. The ammunition cases are .....
...more about the Tamiya 1/35 Grmn 88mm Gun Flak36 N Afrcn Cmpgn

Precisely detailed static display models built with high quality injection molded polystyrene parts. Detailed Crew figures sits freely in the opened hatches. Exquisitely detailed side armor panels covering suspension mechanisms Slide moled hull with accurately depicted hex bolts. Choice of two types of fenders and exhausts. Rolling suspension parts. Lifelike, snap-together track sections. Waterslide decals. Illustrated assembly guide. (1) Plastic Model. Assemble the French .....
...more about the Tamiya 1/35 French Armored Carrier UE

An authentic reproduced compact sihouette with sloped armor Realistic Saukopf type gun mantlet Choice of belt or assembly type tracks with straight sections made of single pieces Highly detailed commander figure Authentic waterslide decals with 4 types of camouflage Illustrated assembly guide. 1/35 scale Tamiya Plastic Model of the Jagdpanzer 38(t) Hetzer Tank with four types of decals, commander figure and instructions. Assemble the Jagdpanzer 38(t) Hetzer Tank Series 285 .....
...more about the Tamiya 1/35 German Tank Destroyer Hetzer

German armored Car Ds. Kfz. 222 ''North African Campaign'' Hightly accurate static display model Authentically reproduced square hull and open top turret Sharply detailed tool case, notek light and DKW NZ350 motorcycle Choice of two types of motorcycle rider Photo-etched parts Aluminum gun barrel Highly detailed commander figure Illustrated assembly guide Authentic waterslide decals with 3 types of markings 1) 1st Squadron, 33rd Recon battalion, 15th Panzer Division - North .....
...more about the Tamiya 1/35 Sd.Kfz.222 North Africa