Extremely accurate detailing of the under chassis drive and suspension system. . Loads of accessories to be attached to the vehicle including helmets, smoke discharger, jerry cans, duffel bags etc. . 1 commander full-figure wearing beret included. . Kit includes decals to represent vehicles used on 5 battle fronts.. Production on the 8-wheeled, all-wheel drive Sd.kfz. 232 armoured vehicle began in 1937. Displaying excellent mobility with 3 forward and 3 reverse gears, the
...more about the Tamiya 1/35 German Armored 8 Wheel SDKFZ232
|
Five realistic figures. Fully detailed, flexible plastic track. Finely detailed upper hull panel. Openable cupola with an M2 machine gun.. The M113 is one of the vehicles most widely used in non-communist countries of the world and is showing activ ity as transport for infantrymen of free nations. Among the important features of the M113 are smallness, lightness, and therefore easiness to use. It is designed as a light armoured personnel carrier for transporting 13 fully
...more about the Tamiya 1/35 US M113 APC CA140
|
Realistically reproduced quad gun tractor. Plenty of accessories!. Realistic driver figure. Very detailed 25 Pdr. gun and limber carrier. Waterslide decals provided with two markings. Illustrated assembly and painting guide. (1) Plastic Model. Asse mble A British 25PDR.Field Gun & Quad Gun Tractor (Canadian Ford F.G.T.) with this Plastic Model Kit from Tamiya's 1;35 Military Miniature Series. Suitable for Age 10 &
...more about the Tamiya 1/35 British 25 Pndr Gun/Quad
|
Plastic pieces attached to sprues and molded in light military green; clear pieces also included. Detailed and realistic exterior and interior. Detailed undercarriage. Interior includes six seats. Doors and roof hatch may be fixed in open or closed position. Various hoods may be left in an open position. Winch wheels are free to revolve. Realistic driver figure. Waterslide decals for Canadian 1st Infantry Division and the British 8th Army Commander's Vehicle. Detailed
...more about the Tamiya 1/35 British Quad Gun Tractor
|
Detailed plastic parts molded in tan and attached to sprues. Includes six realistic figures, three of them shirtless, all in various positions of working with and around the field gun. Firing platform can be constructed into either transporting or firing position. Shield on field gun for soldiers' protection. Limber carrier included with field gun. Includes detailed and very informative pictorial instructions. One 1/35 British 25PDR.Field Gun with Six Soldiers. This is a
...more about the Tamiya 1/35 British 25 pdr Field Gun
|
Realistic rivet detailing. Detailed drivers compartment. Quadruple machine gun with movable gun barrels and base. Includes five realistic figures wearing winter uniforms. Flexible one-piece tracks.. Recognising the excellent tractive force and cros s-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. . .
...more about the Tamiya 1/35 German 8 Ton 1/2 Track Sd.Kfz.
|
Detailed plastic parts molded in gray with clear pieces. Includes a realistic driver. Kit may be assembled with the canvas top pulled up or folded back. Contains white string to be used as rope. Spare tires on the sides. Movable windscreen protects from being spotted by enemy. Machine gun attaches to vehicle. Waterslide decals. Includes detailed and very informative pictorial instructions. One 1/35 S.G.L. Einheits Personen Kraft-Wagen Horch 4x4 Type 1A. Vehicle. This is a
...more about the Tamiya 1/35 German Horch Type 1a
|
Includes three realistic figures - two infantrymen and a commander. Gun barrel elevates and depresses. Hatch is movable, opens or closes. Pliable tank tracks.. The M-41 type tank was greatly improved since its first model appeared in the Korean War and because of its light weight and compactness in size, this type tanks were placed mainly with the mechanized cavalry regiment of the U.S. Mechanized Division, as light tanks available for air transportation.
...more about the Tamiya 1/35 US M41 Walker Bulldog
|
Includes three figures - a commander, a loader, and a driver. Kit may be assembled in early or late model versions. Kit contains two types of road wheels which can be changed when fixing accessory parts. Two types of turret top plates, according to selected model version. Accessories to tank include a shovel, a storage box, wire, logs, a horn, a tool case, and a blanket. Pliable plastic tracks for sturdy movement on frozen, slippery ground.. In ''Operation Citadel'', the
...more about the Tamiya 1/35 Russian 734/76 '43 Tank
|
The German techniques by which the Tiger, Panther, and other excellent tanks were produced was succeeded by this Leopard tank that appeared in 1961 in West Germany. Its chassis and body is water-tight so that it can cross rivers at a depth of 4 met ers underwater. Thus, this tank is a modern, excellent maneuverability tank of which great importance is attached. Detailed plastic parts molded in olive drab and attached to sprues. Includes one realistic figure - a commander.
...more about the Tamiya 1/35 German Leopard Medium Tank
|
Includes two realistic figures - a driver and commander. Highly detailed static display model. Pliable tracks. Formidable gun barrel and escape hatch.. The first mass produced Panther type D was not equipped with a machine gun but after the experie nce of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of
...more about the Tamiya 1/35 German Panther Medium Tank
|
Structurally detailed injection molded parts. Rotating turret with movable gun barrel. Commander and driver's hatch can be opened and closed even after assembly. Detailed figure. Full length vinyl tracks. Complete hull and turret details. Exquisite suspension detail. High quality waterslide decals. Illustrated assembly guide. (1) Plastic Model. Assemble the Russian Heavy Tank KV I (Type C) with this 1;35 Scale Plastic Model Kit from the Tamiya Military Miniature Series.
...more about the Tamiya 1/35 Russian KV-1C
|
First announced in 1970, the Mk. 5 was the main type of Mk. in service in the mid 1970's. Further engine modifications brought the power output up to 750 bph, with consequent improvement in overall performance. Soon, revision of the ammunition stow age arrangements enabled 64 rounds to be stowed. Splash plates were added on the glacis as well. Plastic parts molded in dark green. Three realistic figures included. Openable hatches. Fully detailed plastic, pliable tracks.
...more about the Tamiya 1/35 British Chieftain Mk5
|
Highly detailed exterior. Two unassembled detailed figures with realistic expressions. Tank contains an aerial spread around the vehicle top, unsymmetrical turret, complicated body front, and a seesaw-type suspension. system. Realistic rubber track s. Gunnary included for armament.. A 1/35 Plastic Japanese Medium Tank Type 97
...more about the Tamiya 1/35 Japanese Tank Type 97
|
Half-track vehicles were developed for the U.S. Army from the early 30's when the U.S. Ordnance Dept. studied the successful Citroen-Kegresse half- tracks from France. Various firms in the USA developed half-track designs on behalf of the Ordnance Dept. An improved model, with four.50 calibre machine guns was produced in April 1942, the prototype being designated GMC T58. This was standardized as Gun Motor Carriage M16, and 724 were built by White Motor Company in
...more about the Tamiya 1/35 US M16 Half Track Kit
|
The Sturmgeschuetz (storm or assault gun) was developed in the 1936-39 period to provide armoured support for the infantry. This came about largely because the new tanks being produced were destined for the panzer (armoured) divisions. In a battlef ield situation there was no guarantee that tanks from an armoured division would be available to support the infantry. Thus the idea of the assault gun regiment organic to an infantry division came about. Detailed plastic parts
...more about the Tamiya 1/35 German Strumgeschutz IV
|
Highly accurate static display model. Realistically reproduced exterior details. Commander figure. Fully detailed, flexible plastic track. Side armour plates. Accurate waterslide decals. Great addition in making an attractive diorama!. Illustrated assembly and painting guide. (1) Plastic Model. Assemble the German Tank Destroyer Jagdpanzer IV L/70 Lang with this Plastic Model Kit from Tamiya's 1;35 Military Miniature Series. Suitable for Age 10 &
...more about the Tamiya 1/35 German Jagdpanzer IV Lang Kit
|
The 2cm Flakvierling 38 was one of the most successful and widely used of all German antiaircraft guns developed from the 2cm Flak 38 which were single 2cm mounts. In 1940 and enlarged version of the single 2cm Flak 38, featuring four 2cm guns in a common mount, was designed and put into production. It came into wide service from 1941 onwards and remained an important item of field equipment throughout the war. Plastic pieces attached to sprues and molded in dark gray.
...more about the Tamiya 1/35 German 2cm Flakvierling 38
|
With their long 7.5cm guns, and often with ''skirt'' armour, the later models of the PzKpw IV series have become the best known and the most frequently modelled variants. These were the tanks that took part in all the big tank battles of World War II and formed the backbone of Hitler's panzer divisions. Plastic pieces attached to sprues and molded in dark gray. Ready to assemble precision model kit. Many accessory parts. Three unassembled figures with authentic expressions.
...more about the Tamiya 1/35 German PZKPFW IV AUSF D
|
Basis of the Gepard weapon system is the remarkable Oerlikon-Contraves 35mm which was developed and put into production in the early 1960s. To combat modern jet aircraft approaching on the battlefield at tactical attack heights, a very high rate of fire was needed coupled with a high muzzle velocity. The 35mm calibre was found to be the optimum size for the best combination of weapon weight and effectiveness. Plastic pieces attached to sprues and molded in dark green. Ready
...more about the Tamiya 1/35 West German Lfakpanzer Gepard
|
A scale static display model with realistically reproduced characteristics including the low-profile bonnet. Highly detailed 6x4 chassis. Kar 98K riffle, sacks, light mortar, wooden boxes, ammunitions boxes, Panzerschreck, MG42 and jerry cans. Driv er figure with realistic uniform detail. Clear plastic used for the front windshield. Detailed open cab. Waterslide decals with markings for 3 different vehicles. Illustrated assembly guide. (1) Plastic Model. Assemble a German
...more about the Tamiya 1/35 German 6x4 LT Krupp Protze
|
The T62 tank made its first official appearance in the victory parade to celebrate the 20th anniversary of the victory over Germany on May 9th 1965. It was the Soviet Union's reply to the Western new tanks. However, eight years later in October 197 3, Israeli troops captured a considerable number of Arab T62 tanks and about ten of these were sent to the U.S. and put through exhaustive tests, which revealed everything about the tank which had been veiled in mystery. Plastic
...more about the Tamiya 1/35 Russian T-62A Tank
|
There are numerous variations and modifications of the M48 in existence today, and this kit depicts an M48A3 ''Patton'' as it appeared during the Viet Nam conflict when employed by the U.S. forces. Plastic parts molded in olive drab green. Position of accessories on tank - such as the Jerry cans - can vary. Commander and another figure included. Pliable and authentic tank tracks. Wire rope included. Waterslide decals with markings for two tank craft. Detailed pictorial
...more about the Tamiya 1/35 US M48A3 Patton Tank
|
The familiar Jeep was born during WWII and it is said that it contributed greatly to the allied victory during that time. Following the conflict, this vehicle was widely used by most countries of the world as a small transport for ground forces and later employed large calibre weapons systems for ground combat support. Plastic parts molded in tan. Driver figure included. Jeep seats one driver; opposite side of vehicle contains large missile launcher which extends the length
...more about the Tamiya 1/35 US M151A2 w/Tow Launcher
|
Plastic parts molded in tan. Accurately detailed tank comes with a commander figure. Movable turret. Mesh netting. Choice of open or closed hatches. 105mm main gun with thermal jacket. Open or closed headlamps. Pliable and plastic tracks. Waterslid e decals. Detailed pictorial instructions include a historical background of the Merkava. One 1/35 Merkava Israeli Main Battle Tank. This is a 1/35 Plastic Merkava Israeli Main Battle Tank from Tamiya. Recommended for ages 10 and
...more about the Tamiya 1/35 Israeli Merkava Main Battle Tank
|
Ready to assemble precision model kit. Army or Marine Corps version options. Molded driver figure with realistic uniform details. Paper cut-outs of combat ration cartons. Plastic molded Firestone tires with tread pattern. Plenty of accessories. Att achable cargo trailer with realistic details. Illustrated assembly and painting guide. (1) Plastic Model. Assemble A U.S. M151A2 Ford Mutt with M416 Cargo Trailer with this Plastic Model Kit from Tamiya's 1;35 Military Miniature
...more about the Tamiya 1/35 U S Ford Mutt w/M416 Trailer
|
At the time of its introduction, in 1942, the German Tiger I was the most powerful and sophisticated tank available anywhere in the world, and is still considered a weaponry masterpiece of that era. Most of the Tiger I's were produced by Henschel, a heavy industry manufacturer in Germany. The later versions of the Tiger I went into production in January 1944, almost two and a half years after its debut. Many features like the thick armor plating remained unchanged. Detailed
...more about the Tamiya 1/32 German Heavy Tiger I
|
The Sd.Ktz. 251 half-track stable was the centerpiece of the German Mechanized Corps, throughout the World War 2. First production began in 1939, with the series classified into four types from Ausf.A to D, according to the production period. The e arly models used a very complicated body construction, made up of obliquely placed armor plates. This was somewhat simplified in the C and D types, to make mass production easier. The final, ''D'' production version appeared at
...more about the Tamiya 1/32 German Sd.Kfz. 251/9 Kanonenwagen
|
Accurately detailed exterior. Movable gun and one piece turret. Choice of open or closed commander's and loader's hatches. Realistic flexible plastic tracks. Two life-like figures. Metal shaft. Plenty of accessories. Authentic waterslide decals. Gr eat addition in making an attractive diorama!. Illustrated assembly and painting guide. (1) Plastic Model. Assemble the T34/76 Russian Tank ''ChTZ'' Version, 1943 Production with this Plastic Model Kit from Tamiya's 1;35 Military
...more about the Tamiya 1/35 Russian T34/76 ChTZ Kit
|
Great Britian has a long and interesting history of armored vehicle use and development. In fact, they coined the term ''TANK'' for such weapons, and are known as well, for their superb designs. Their latest version of the Challenger Main Battle Ta nk is regarded as one of the most advanced armored fighting vehicles in service in the world today. Modern technology has enabled several outstanding improvements in its firepower, crew protection, and mobility, to meet the
...more about the Tamiya 1/35 British MBT Challenger I
|
