Plastic Models

A stunning replica of a late production Panther G tank built from high quality, injection molded polystyrene parts with amazingly accurate details! Oustanding lower and upper hull detail! Rotating turret with with accurate weld patterns. Slide molded commander's cupola parts with interior details. Hatches may be fixed in the open or closed position. Realistically reproduced gun detail, complete with breech. Movable mantlet in 2 different styles. Molded gun barrel with a .....
...more about the DML 1/35 Panther G Sd.Kfz. 171 Late Prod

A stunning replica of the Sd. Kfz. 251 Ausf. C tank in plastic form. This kit allows you to build 1 of the following 3 versions; - Sd. Kfz. 251/2 Ausf. C with 32cm WK FI - Sd. Kfz. 251/2 Ausf. C with 28cm WK Spr - Sd. Kfz. 251/10 Ausf. C with 3. 7cm PAK 36 One-piece slide molded lower and upper hull with ammazingly accurate details. Photo etched engine grilles. Turned aluminum gun barrel. Snap together Magic Tracks depicting the standard combat track Gg 26/800/300 with .....
...more about the DML 1/35 Sd.Kfz. 186 Jagdtiger Henschel

A stunning model replica! This kit provides a wide variety of finishing and building options including (but not limited to); * 3 different gun shields with ''wings'' * Plastic or metal main barrel * 4 different weapons * 2 kinds of gun cradle * Travel or firing positions Aiming data readouts are provided as pre-decaled clear parts. Gun can recoil. Turned aluminum equilibrators with working mechanism. Slide molded styrene tires with wrap-around tread pattern and no seams. .....
...more about the DML 1/35 88mm Flak 37 3 'n 1 w/Bonus Features

A stunning model replica! Authentically detailed turntable base with separate turntable. Superbly molded tightening hand wheels (optional photo etched brass wheels also provided). Prototypical gun cradle. 4 different elevation arms and sight linkage rods to position the gun at a 0, 20, 40 or 60 elevation. Optional photo etched brass or molded plastic shields. The shell ejection cage is nicely reproduced with plastic frames and etched mesh with the lower bag. The Sd. Ah. .....
...more about the DML 1/35 2cm Flak 38 w/Sd.Ah.51 Trailer

Beautifully reproduced upper hull detail including flush countersunk bolts and weld seams. Fenders with intricate diamond tread pattern. Multi-directional slide molded turret with accurate bolt and weld seam details. Turret access hatch and visionport covers can be fixed in the open or closed position. Multi-directional slide molded engine deck with hatches that can be modeled in the open or closed position. Photo etched brass exhaust covers. Accurately reproduced glacis .....
...more about the DML 1/35 Pz.Kpfw.I Ausf.A Early Prod Smart Kit Series

A stunning replica of a Pz. Kpfw. 38(t) for static display. Bolt details reproduced from historical photos. Easily assembled detailed interior with some photo-etched parts. Hatches may be fixed in the open or closed position. Realistically reproduced main gun and mount. Movable main gun and machine gun. Finely detailed engine compartment and transmission system. Exquisitely detailed engine deck with hatches that can be modeled in the open or closed position. Newly tooled .....
...more about the DML 1/35 Pz.38(t) Ausf.G

A stunning replica of the Pz. Kpfw. IV Ausf. C tank built from high quality, injection molded polystyrene parts with amazingly accurate details! Oustanding lower and upper hull detail with separately molded fenders detailed with crosshatch tread on both sides. Beautifully detailed Kw. K. 37 L/24 gun with accurately reproduced used ammo basket. Complete, slide molded co-axial MG with accurate rifling inside the gun barrel. Ausf. C turret with accurate weld patterns. .....
...more about the DML 1/35 Pz.Kpfw. IV Ausf. C Superkit

Exquisitly recreated bolt, hinge and strut details. Injection molded Magic Track links with a casting number etched on each individual track link. Suspension with outstanding detail! The ''natural'' bend is represented in the fenders. Multi-directional slide molded lower hull with bolt and rib details accurately molded. Slide molded upper hull reproduced with extreme detail including bolted front armor plate and glacis. Access doors and inspection hatch can be fixed in the .....
...more about the DML 1/35 Aufklarungspanzer 38(t)

Realistic, highly detailed anti-grenade screens can be assembled in the open or closed position. Includes all new, historically accurate, one-piece 2cm turret, with photo-etched detail. Newly tooled items for the 234/1 include the slide-molded, early style side fenders and upper hull. The front hull has been reconfigured for the 234/1 for more accuracy. Also features a new compartment floor panel. Finely detailed radio mounts and delicate star antenna with photo- etched .....
...more about the DML 1/35 Sd. Kfz. 234/1 w/New Tooling

A stunning replica of the Panther D tank built from high quality, injection molded polystyrene parts with amazingly accurate details! Oustanding lower and upper hull detail with separately applied fenders and metal side armor skirts. Highly detailed suspension with separate swing arms, and idler arms that can be modled in different positions. Accurately reproduced wheels. Superb engine deck detail with optional photo etched brass grills. Slide molded Magic Track track links .....
...more about the DML 1/35 Sd. Kfz. 171 Panther D Premium Ed

A stunning replica of the Pz. Kpfw. IV Ausf. E tank built from high quality, injection molded polystyrene parts with amazingly accurate details. Build either the Vorpanzer or a standard later production Panzer IV Ausf E with additional armour on the lower hull. Optional plastic Kwk37 L/24 gun with muzzle rifling or turned metal gun without rifling. Newly tooled turret with front and side armour, Vorpanzer mantlet armour, and a newly designed storage bin. Turret interior .....
...more about the DML 1/35 Pz.Kpfw.IV Ausf.E ''Vorpanzer''

Sd. Kfz. 182 King Tiger Tank with a Porsche Turret & Zimmerit from Dragon(R) For ages; 14+. This is one of Dragon's '39-'45 Series kits Features injection molded grey plastic parts, numerous photo-etched metal parts and a few molded metal partsers an exceptional level of realism and authenticity, including; loader's hatch with interior detail, detailed exhaust covers, photo-etched and pre-formed engine deck grills, separate commman- der's hatch swivel arm, .....
...more about the DML 1/35 King Tiger Porsche Turret w/Zimmerit

A stunning replica of the Sd. Kfz. 182 Kingtiger Henschel Turret w/ Zimmerit This kit allows you to build 1 of the following 8 versions; 1) s. Pz. Abt. 503, France 1944 2) 1. /. s. Pz. Abt. 101, France 1944 3) 3. /s. H. Pz. Abt. 501, Ohrdruf 1944 4) s. Pz. Abt. 506, Germany 1945 5) 1. /s. Pz. Abt. 101, France 1944 6) 1. /s. Pz. Abt. FHH. , Hungary 1945 7) 3. /s. H. Pz. Abt. 506, Germany 1945 8) 3. /s. H. Pz. Abt. 506, Germany 1945 Photo-etched engine deck grills, engine .....
...more about the DML 1/35 King Tiger Henschel Trt w/Zimmerit

Superbly detailed, injection-molded model replica. Plastic injection molded Magic Tracks. One piece, drop fit turned metal barrel. Clear plastic parts for the drivers and commander's periscopes. Braided metal tow cable. Pre-formed metal U-shaped tow hooks, and metal pins for the front fender hinges. Brass pistol port cover chains. Photo etched brass fenders with crosshatch tread on both sides. A variety of tools are molded separately to be stored in the photo etched brass .....
...more about the DML 1/35 Elefant Sd. Kfz 184 Premium Edition

A re-issue of an older Dragon vehicle kit containing new parts and features! A realistic depiction of the early production Kingtiger with a Porsche designed turret. Curved mantlet elevates with an 88mm gun. BONUS aluminum gun barrel. Exquisitely detailed frontal MG can rotate. The close-defense weapon, and rear turret hatch can be assembled in the open or closed position. Rear pistol port can be fixed in the open or closed position (a copper cover chain is provided for the .....
...more about the DML 1/35 Kingtiger Porsche Turret Sd.Kfz.182w/Alm barl

Accurately reproduced static display model built from quality, injection molded parts with realistic weld seams. Dragon Styrene 100 full length track lengths. Etched brass sand shields. Complete suspension detail including stamped type road and idler wheels, including back hub details. Transmission cover with extreme realism. Realistic, slide molded gun barrel with optional rotor shield types. Slide molded, early 75mm turret design based on actual Army schematics. Photo .....
...more about the DML 1/35 Sherman Mk.III

A stunning static display model that accurately depicts a later production Nashorn. Beautifully reproduced upper hull including weld lines. Etched metal side exhaust grills and rear brackets. Exquisitely detailed 88mm Pak 43 and shield with etchedmetal scope weld patch. Slide molded MP 40 submachine guns, MP44 assault rifles and Gewehr 43 rifles. Newly tooled 40cm Magic Tracks. Optional turned aluminum or plastic gun barrel. Slide molded exhaust/muffler and muzzle brake. .....
...more about the DML 1/35 Sd.Kfz. 164 Nashorn Prem Ed

A stunning replica of the Pz. Kpfw. IV Ausf. F-1 (F) tank built from high quality, injection molded polystyrene parts with amazingly accurate details 3-directional slide-molded turret with great detail Hull bottom is fully detailed with one-piece lower hull made from slide molds Turrent front view port can be molded open/closed Photo-etched parts Clear parts for vision port glass Commander's hatch with interior detail Pistol ports can be shown open/closed Separate front and .....
...more about the DML 1/35 Pz.Kpfw.IV Ausf.F-1

A stunning static display model that accurately depicts a later production Nashorn. Beautifully reproduced upper hull and superstructure including weld lines. BONUS; Photo etched side fenders with crosshatch tread. Metal tow cable with slide molded cable heads, and photo etched cable clamps. Movable, metal U-shaped towing hooks. Driver's hatch with etched metal details and clear periscope parts. Hatches can be fixed in the open or closed position. Aluminum gun barrel with .....
...more about the DML 1/35 Sd.Kfz.184 Ferdinand w/Mtl Barrel Prem Ed

A re-issued kit with exquisitely detailed plastic parts. Beautifully reproduced suspension with individual Magic Track track links. Rotating turret with superb weld seam details! Photo etched brass rear turret tie-down brackets and straps. Two types of brass ammunition rounds. Optional metal or plastic gun barrel. Movable mantlet. Exquisitely detailed, movable front MG. Etched brass spare track tie-downs, fuel tank brackets, and rear fuel barrel brackets. Precise engine .....
...more about the DML 1/35 T34/85 Mod 1944

A stunning model replica built with injection molded plastic parts, beautifully scribed with impressive details! Slide molded lower hull with full detail including weld seams. Injection molded 40cm Magic Tracks. Sprocket wheels, road wheels, tracktension adjuster, and final drive housing covers detailed with extreme realism. Slide molded torsion bars. Exquisitely detailed suspension swing arms and slide molded hydraulic shock absorbers. Authentically reproduced fighting .....
...more about the DML 1/35 StuG III AusfG Erly Prod Smrt Kit

...more about the DML 1/35 Sherman M4A376W VVSS

This is a 2-in-1 kit, which means the parts provided can either build a M2 or M2A1 static display model. Exquisitly recreated bolt, hinge and strut details. Beautifully reproduced chassis components including spring suspension, steering mechanism,differential housing and dual drive train with disc brake assembly. Detailed engine with radiator and oil sump. Optional open or closed armored front grill, with etched metal slats for the open position. Front window armor can be .....
...more about the DML 1/35 M2/M2A1 Half-Track Smart Kit Srs 2/1

Exquisitly recreated bolt, hinge and strut details. 4-direction slide molded lower hull. The upper hull is reproduced with extreme detail, including slide molded front and side armor shields, radio and rack. Access doors and inspection hatch can be fixed in the open or closed position. Movable hull-mounted MG with hollow muzzle. Preformed metal rear basket, and slide molded perforated lateral sheets. Photo etched rear and lateral basket supports. Perforated storage box. .....
...more about the DML 1/35 Marder III Ausf.H Smart Kit

Sophistically molded polystyrene parts (over 300 parts) Newly tooled chairs Photo-etched parts for belt, shoulder boards, insignia and medals Side-molded weapons with astonishing detail Hollowed rifle muzzle Separate parts for bolt mechanism and accurate ammo clips MG42 in Gen2 standard Separate feed cover can be assembled open or closed Fully detailed ammo boxes produced by slide-molds Ammo belts possess crip details. Four figures and accessories. This is the .....
...more about the DML 1/35 German Panzergrenadier Italy 1943-45

Accurately reproduced turntable base with separate turntable. Updated platform structure for the 3cm FlaK 38/103. Optional photo etched brass or plastic hand wheels. 4 different elevation arms and sight linkage rods to position the gun at a 0, 20, 40 or 60 elevation. Detailed gun shield with updated center shield. Optional photo etched brass gunner's shield and preformed gun shield. Beautifully detailed 3cm FlaK 38/103 gun with slide molded gun barrel, and hollow muzzle .....
...more about the DML 1/35 3cm Flak 103/38 w/Trailer

A stunning model replica engineered with exquisite surface detail! Complete lower hull detail including fillets and return roller mounts molded on. Extreme HVSS suspension detail! Optional metal springs and hollow metal cylinders allow the susupension to be made workable. Rubber tires. Simulated T80 HVSS tracks made of DS100 material. Beautifully reproduced upper hull with separately applied 1st aid kit, and on-vehicle tools. Optional plastic or photo etched headlamp and .....
...more about the DML 1/35 Sherman M4A3 w/105mm Howitzer Gun & HVSS

High-quality plastic parts molded with the highest level of detail and accuracy Well-detailed turrent weld seams and screws Turrent vision port covers can be assembled open/closed Multi-directional slide-molded turrent Moveable gun assembly Antenna assembly cn be molded in upright or stowed position Driver's vision port covers can be assembled open/closed Engine deck hatches can be assembled open/closed Photo-etched exhaust cover Can be painted in three differnet versions; .....
...more about the DML 1/35 Pz.Kpfw.I Ausf.A Modified Version w/Interior

Slide molded lower hull with fuel filler hatch on each side. Complete fighting compartment interior detail, including both gunner's and commander's seats with collapsible backs. Magic Tracks with photo etched spare track brackets. The 10cm Kanone 18 and its gun cradle have been newly tooled with breathtaking detail! Optional 10. 5cm le. FH 18 muzzle brake. BONUS; metal gun barrel! Authentically reproduced ventilation system. Hatches may be fixed in the open or closed .....
...more about the DML 1/35 10.5cm K.Pz.Sfl.IVa Dicker Max

This kit is a re-issue of an older Dragon vehicle kit containing new parts and features! It's a stunning model replica built with injection molded plastic parts, beautifully scribed with impressive details! Slide molded lower hull with separate swing arms, and idler arm that can be modeled in different positions. Injection molded Magic Tracks with slide molded guide horn details. Metal side armor skirts. Photo etched spare track rack. Beautifully reproduced turret .....
...more about the DML 1/35 Panther A Late Prod Premium Ed