Thru the use of slide molds, this model has impressively accurate details including the weld seams, bolts and rivets! Injection molded side fenders with crisp details on both the top and underside. Front and rear fender sections can be modeled in a folded back position. Rotating turret made by 3-directional slide molds. Commander's hatch can be assembled in the open position to display its inner detail. Exquisitely depicted 7. 5cm KwK40 L/43 gun with accurate rifling inside
.....
...more about the DML 1/35 PzKpfw IV Ausf F2(G) Smart Kit
|
Thru the use of slide molds, this model has impressively accurate details including tread plate pattern and rivets! One-piece chassis frame with steering mechanism, and complete drive train detail including transmission, differential housing housing and suspension units. Superb sprocket wheel, idler wheel, road wheel and hubcap details! Pre-formed rubber tracks molded with center guide band. Outstanding bodywork detail with bolt and hinge details. Exquisitely reproduced
.....
...more about the DML 1/35 M4 81mm Mortar Carrier
|
Side fenders with patterned detail on both top and bottom surfaces Injection-molded fenders made to thinnest possible dimensions Separate front and rear fenders can be posed in a folded-back position Mantlet guard can be removed and gun unloaded as on the real vehicle Detailed gun muzzle brake Finely detailed 7. 5cm Kw. K40 L/43 gun Complete gun assembly with full detail Steering brake access hatches can be modeled open/closed Headlights in exquisite detail Metal towing
.....
...more about the DML 1/35 PzKpfw IV AusfG LAH Div Kharkov '43
|
High-quality plastic parts molded with the highest level of detail and accuracy. Amazingly detailed lower hull interior! Realistically rendered suspension, including newly tooled 800mm steel wheels and spare wheel with rivet details. Newly tooled Magic Tracks with slide molded guide horn details. Oustanding upper hull detail including authentic weld seams. Exquisitely detailed engine deck with 2 types of hatches that can be modeled in the open or closed position. 2 options
.....
...more about the DML 1/35 Panther Ausf. G Late w/Stl Road Wheel
|
High-quality plastic parts molded with outstanding detail Over 690 parts Illustrated assembly guide. One Pz.Kpfw.III Ausf.J tank. This is a 1/35 scale Pz.Kpfw.III Ausf.J Plastic Kit by Dragon Suitable for Ages 14 &
.....
...more about the DML 1/35 Pz.Kpfw.III Ausf.J 2 'n 1
|
An exquisitely detailed DS100 (Dragon Styrene) figure. The newly designed hull is built with beautifully detailed, separately molded pieces. The hull drop sides are fitted with ammo boxes, and can be fixed in the transport or combat mode. Slide molded ammo clips. Exquisitely detailed 2cm cannon with hollow muzzle opening, and 3 types of slide molded barrels to choose from; standard, late and Schwebelafette. Assemble the cannon in 1 of 4 elevated positions. Slide molded
.....
...more about the DML 1/35 German Half-Track Sd.Kfz.251/17 Ausf.C
|
A stunning replica of the Pz. Kpfw. VI Ausf. E tank in plastic form. This kit allows you to build 1 of the following 3 versions; - Pz. Kpfw. VI Ausf. E Tiger I Late - Pz. Kpfw. VI Ausf. E Tiger I Late Command - Pz. Kpfw. VI Ausf. E Tiger I Final Authentically reproduced, 5-directional slide-molded cupola. Newly tooled one piece turret with workable escape hatch. Clear periscope ports in cupola. Loader's hatch with interior details can be assembled open or closed. Photo
.....
...more about the DML 1/35 PzKpfw VI Tgr I Lt Prod 3 'n 1
|
Detailed suspention system One-piece lower hull offers easy assembly Two types of storage boxes provided Running gear finely reproduced Photo-etched engine deck grill and louvers Spare track tie-downs made fro photo-etched parts Slide-molded gun barrels and bonus metal gun barrels Injection molded track with fine detail Metal tow cable included Commander's hatch can be assembled open or closed Option of two types of commander's hatch Waterslide decals printed by Cartograf
.....
...more about the DML 1/35 T-34/76 Mod. 1941 Cast Turret
|
New one-piece slide-molded lower hull Newly tooled suspension system Photo-etched brackets for equipment Gen2 equipment for interior included as a bonus New rear rotatable MG mount Detailed engine This kit allows you to build 1 of the following 7 versions; 1; 3/Pz. Aufkl. Btl. , 2. Pz. Div. , France 1944 2; 5. Pz. Div. ''Wiking'', Hungary, Eastern Front 1945 3; 1. Pz Div. ''LAH'', Kamenets Podolsk 1944 4; Obergruppenfuhrer von Puckler-Berghaus, Orlik-Cimelice, Bohemia 1945
.....
...more about the DML 1/35 Sd.Kfz.250/1 NEU Armored Personnel Carrier
|
High-quality plastic parts molded with the highest level of detail and accuracy Photo-teched pieces Intricate slide-molded front light assembly Metal U-shaped tow shackles Finely detailed hull bottom Bonus metal side armor skirts One-piece slide-molded track with hollow guide horns by DS Bonus on-vehicle tools with clasps Optional separate pistol port with chain Rear hatch can be molded open/closed Accuate weld patterns on turret with Zimmerit Delicate Zimmerit pattern
.....
...more about the DML 1/35 Panther Ausf.D w/Zimmerit Coating
|
|
|
A stunning replica of the Heuschrecke IVb ''Grasshopper'' Turret has interior detail Photo etched brass parts Turret mounting-pad can be installed on vehicle or on the ground with turret 40cm magic track Lower hull is slide molded with authentic details Includeds Gen2 equipment for interior Bonus ammunmition included Road wheels and suspension are finely detailed Sprocket wheels with multiple delicate parts Waterslide decals printed by Cartograf Illustrated assembly guide.
.....
...more about the DML 1/35 Heuschrecke IVb Grasshopper 10.5cm
|
Ready for instant assembly! Detailed engine radiator New 2-directional slide mold lower hull Newly tooled exhausts Highly realistic fighting compartment with gunner's persicope, rear escape hatch, new upper hull and more One-piece gun barrel with movable front ball- mount MG Gun mantlet rendered with 360 detail Full suspension assembly with road wheel and idler arms Magic-Tracks with slide-molded guide horn details Photo-etched parts for engine deck grills Metal tow cables
.....
...more about the DML 1/35 Jagdpanther Ausf.G1 Early Production
|
*** New Item ***
Slide-skirt armor plates can be installed separately One-piece fighting compartment with pistol parts Slide-molded periscope with clear plastic parts Fully detailed gun with breech assembly Gunner's seat plus clear-plastic periscope represented indetail Fighting compartment floor has realistic texture Gunner's seat wtih realistic texture Star-antenna included Accurately reproduced mount for star-antenna Photo-etched parts for engine deck grills Cartograf decals for the
.....
...more about the DML 1/35 Stu.Pz.IV Brummbar Mid-Production Smart Kit
|
This kit allows you to build 1 of the following 3 versions; - USMC, PTO, 1944/45 - Co. C, 1st Tank Battalion, USMC, Peleliu 1944 - Co. C, 2nd Tank Battalion, USMC, Tinian 1943 Separately pistol port hatch can be assembled open or closed Foldable shelf/rack on the rear hull plate Rotor shield redesigned according to Army schematics Gun shield with fine bolt detail Hull side plates are accurately reproduced with horizontal upper edge Two option for sprockets OVM delicately
.....
...more about the DML 1/35 US Marines Sherman M4A2(W) PTO
|
|
|
|
Open-topped fighting compartment specially designed to accommodate 2 cm Flak 38 Fighting compartment armor can be positioned up or down in travel or combat modes Fighting compartment with full interior detail - reinforcement strips with bolt detail realistically reproduced Both locked or unlocked catches included as separate detailed parts Upper hull rendered with beautiful detail Newly designed engine deck cover can be assembled opened or closed Catches on inside of rear
.....
...more about the DML 1/35 Flakpanzer 38t Ausf.L Gepard
|
|
|
|
An injection-molded full-hull model replica!. Photo-etched brass parts including railings. Completely detailed deck, captain's bridge and superstructures. Realistically molded gun turrets including 380mm guns. Lifeboats and airplanes. Display stand. Waterslide decals printed by Cartograf. Illustrated assembly guide. (1) Plastic Model. Assemble the German Battleship Bismarck with this 1;700 Plastic Model Kit from the Dragon Modern Sea Power Series. Suitable for Ages 10 &
.....
...more about the DML 1/700 German Battleship Bismarck
|
High-quality plastic parts molded with the highest level of detail and accuracy. One-piece Dragon Styrene tracks. Oustanding upper hull detail including options to modeling the rear grille; - solid styrene w/etched brass louvers - open styrene w/etched brass grille mesh Hatches can be modeled in the open or closed position. Optional photo etched parts to detail hatch interior. Slide molded fuel tanks and gun barrel. Accurately reproduced mantlet and wheels. Waterslide
.....
...more about the DML 1/72 Russian SU-100 Tank Destroyer
|
High-quality plastic parts molded with the highest level of detail and accuracy Metal tow cable Newly tooled and fully detailed fighting compartment rear plate Brand new one-piece gun barrel made from slide molds Newly tooled mantlet New gun shield for SU-85M Accurate engine deck cover One-piece driver's hatch Can be painted in three differnet versions; 1) Unidentified Unit, Eastern Front 1945 2) Unidentified Unit, Poland 1945 3) Unidentified Unit, Bohemia 1945 Illustrated
.....
...more about the DML 1/72 SU-85M Tank Destroyer
|
Diecast metal body and undercarriage. Plastic parts molded in gray and attached to sprue trees. Ready to assemble precision model kit. Complete exterior detailing. Detailed flexible tracks. Realistically molded road wheels and sprockets. Movable main gun. Pictorial instructions. One Sd.Kfz.173 Jagdpanther Late Version Model Kit. This is a 1/72 Scale Sd.Kfz.173 Jagdpanther Late Version Plastic Model Kit from Dragon Models. For Ages 10 and
.....
...more about the DML 1/72 Kfz 173 Jagd Panther Lt Version
|
Ready to assemble precision model kit. Detailed gray plastic parts are attached to sprue trees. Complete exterior detailing. Detailed flexible tracks. Realistically molded road wheels and sprockets. Movable main gun. Front of tank features a mine plough. Pictorial instructions. One M1A1 Abrams w/Mine Plough Plastic Model Kit. This is a 1/72 Scale M1A1 Abrams w/Mine Plough Plastic Model Kit from Dragon Models. For Ages 10 and
.....
...more about the DML 1/72 M1A1 Abrams w/Mine Plough
|
Ready to assemble precision model kit. Detailed gray plastic parts are attached to sprue trees. Complete exterior detailing. Detailed flexible tracks. Realistically molded road wheels and sprockets. Movable main gun. Pictorial instructions. One M1A1 Abrams Plastic Model Kit. This is a 1/72 Scale M1A1 Abrams 3rd Infantry Division Iraq 2003 Plastic Model Kit from Dragon Models. For Ages 10 and
.....
...more about the DML 1/72 M1A1 Abrams 3rd Infntry Div 1
|
Exquisitely detailed including mounted saw. Driver's hatch may be fixed in the open or closed position. Photo etched engine grille, louvers and other detail parts. Slide molded turret and gun barrel. Accurately reproduced mantlet. One-piece DragonStyrene ''waffle'' tracks. Slide molded road wheels, idler wheels and sprocket wheels. Metal tow cable. Authentically reproduced waterslide decals printed by Cartograf. Illustrated assembly guide. (1) Plastic Model. This is a
.....
...more about the DML 1/72 T-34/76 WWII Russn Tnk '42 w/Cst Turt
|
A stunning reproduction of the Bergepanzer built with exquisitely detailed, high-quality slide-molded parts. Option to build an early or late version with authentically detailed upper and frontal armor. Photo etched brass details. Exquisitely detailed derrick crane with etched metal chain. Crane can be modeled in the deployed or stowed position. Meticulously detailed tracks consisting of short lengths and single links. Intricately detailed road wheels. Waterslide decals.
.....
...more about the DML 1/72 Bergepanzer Tiger (P)
|
Ready to assemble precision model kit. Detailed gray plastic parts are attached to sprue trees. Complete exterior detailing. Detailed flexible tracks. Realistically molded road wheels and sprockets. Movable main gun. Pictorial instructions. One Challenger II Plastic Model Kit. This is a 1/72 Scale Challenger II Tank Iraq 2003 Plastic Model Kit from Dragon Models. For Ages 10 and
.....
...more about the DML 1/72 Challenger II Iran 2003
|
This replica of the late production Jagdpanzer IV L/70 features a photo-etched star antenna with metal wire rod and authentic, newly tooled mount. Assemble the traveling clamp locked or at rest. The front fenders and engine deck feature crisp details for added realism. New on-vehicle tools include a wrench, shovel, axe and more. Historically accurate mantlet. Choose to model the periscope hatch in an open or closed position. Single piece gun barrel and exhaust pipes are
.....
...more about the DML 1/72 Jagdpanzer IV L/70 Command Ver w/Alum Barrel
|
