Academy Plastic Models

Named after one of the most famous American generals of WWII, the Patton entered service at the tail end of the Korean war. Over the years, improved versions culminated in the M48, and the M60A1 was developed from it to counter the Russian T-54, which featured a 105mm main gun and much improved range- finder system. Pattons is a passive explosive reactive armour system. The passive armour blocks explode to destroy or deflect incoming projectiles. Highly detailed 1/35th .....
...more about the Academy Plastics 1/35 M60A1 Patton Blazer Tank

The Sturmgeschutz IV was an assault gun produced for the German Army based on the Panzer IV chassis. It was used mainly as a mobile artillery piece to knock out hardened enemy emplacements such as pill-boxes, anti-tank guns and other obstacles. The guns were used throughout WWII and served on the Russian front, plus the battles around Normandy after D-Day. Detailed 1/35th scale plastic kit for static display. 214 parts in medium tan plastic with one piece flexible P.V.C. .....
...more about the Academy Plastics 1/35 Sturmgeschultz IV

Dark green plastic parts are attached to sprue trees. Can be built as an open top or hard top version. Detailed engine and engine compartment. Realistic interior. Details include jerry can, antenna, machine gun and various boxes. Includes parts tocontruct a pull-behind utility trailer. Jeep and trailer have realistic suspensions. Waterslide decals. Detailed pictorial instructions. One 1/35 Scale M151A2 Hard Top Jeep with Trailer Plastic Model Kit. This is a 1/35 Scale .....
...more about the Academy Plastics 1/35 M151A2 Hard Top Jeep w/Trailer

In 1951, a contract was granted to Ford Motor Co. to develop a Military Utility Tactical Truck. The vehicles were issued to the military with the designation of M151. Due to the swing-axle type suspension and lack of body tilt on cornering, the M151 had a tendency to oversteer and roll when cornered too aggressively. Despite a reputation of being unsafe, the M151 established a record of reliability and proven performance over a wide range of operational areas, suited for .....
...more about the Academy Plastics 1/35 M151A1 Light Utility Truck

The M151 series of vehicles were developed under the US Military Utility Tactical Truck Project (MUTT). They were compact, all-wheel-drive utility trucks. The rear suspension was changed to heavier-duty resulting in the M151A1. Accurately reproduced. Highly detailed engine room and suspension. Detailed 105mm Recoilless Gun. Various armaments and accessories. Flexible black tires with tread. Waterslide decals provided to create 1 of 2 United States' versions from Vietnam .....
...more about the Academy Plastics 1/35 M151A1 w/105mm Recoilless Gun

The M151 series of vehicles were developed under the US Military Utility Tactical Truck Project (MUTT). They were compact, all-wheel-drive utility trucks. The rear suspension was changed to heavier-duty resulting in the M151A1. Accurately reproduced. Highly detailed engine room and suspension. Decked out with plenty of realistic accessories. Flexible black tires with tread. Illustrated assembly instructions. One Israel Defense Forces M151A1 Shmira. Assemble an Israel .....
...more about the Academy Plastics 1/35 M151A1 Shmira

World famous main battle tank. Ready for quick and easy assemlby. Highly detailed hull and turret characteristics. Continuous tracks. Detailed cannon gun and two automatic guns. Waterslide decals. Illustrated assembly instructions. One Merkava Israeli Main Battle Tank. Assemble the Merkava Israeli Main Battle Tank with this 1;48 Plastic Model Kit from Academy's Mini Tank Series. Suitable for ages 10 and .....
...more about the Academy Plastics 1/48 Merkava Israeli Main Battle Tank

World famous main battle tank. Ready for quick and easy assemlby. Highly detailed hull and turret characteristics. Continuous tracks. Detailed cannon gun and one automatic guns. Waterslide decals. Illustrated assembly instructions. One T-72 Russian Army Main Battle Tank. Assemble the T-72 Russian Army Main Battle Tank with this 1;48 Plastic Model Kit from Academy's Mini Tank Series. Suitable for ages 10 and .....
...more about the Academy Plastics 1/48 T-72 Russian Army Main Battle Tank

World famous main battle tank. Ready for quick and easy assembly. Highly detailed hull and turret characteristics. Continuous tracks. Detailed cannon gun and one automatic guns. Waterslide decals. Illustrated assembly instructions. One Challenger British Main Battle Tank. Assemble the Challenger British Main Battle Tank with this 1;48 Plastic Model Kit from Academy's Mini Tank Series. Suitable for ages 10 and .....
...more about the Academy Plastics 1/48 Challenger British Main Battle Tank

World famous main battle tank. Ready for quick and easy assembly. Highly detailed hull and turret characteristics. Continuous tracks. Detailed main gun and automatic gun. Waterslide decals. Illustrated assembly instructions. One Plastic Model. Assemble the Leopard 2 A5 German Army Main Battle Tank with This 1;48 Plastic Model Kit from Academy's Mini Tank Series. Suitable for ages 10 and .....
...more about the Academy Plastics 1/48 Leopard 2 A5 German Army Battle Tank

Highly detailed 1;48 plastic kit for static display. Press-together construction, no glue is needed! Dark green plastic parts are attached to sprue trees. Flexible rubber tracks. Rotating turret with elevating gun. Detailed road wheels. Realistic rivet detailing.. This is a 1;48 M60 A1 US Army Main Battle Tank Plastic Model Kit from Academy Hobby .....
...more about the Academy Plastics 1/48 M60A1 U.S. Army Main Battle Tank

100% new tooling, structurally detailed injection molded parts. Meshing for the turret basket. Rotating driver's hatch which can be modeled in open or closed position. ACAV style shields with the front fixed shield, the rear three sided shields aswell as the two smaller side panels. Full length vinyl tracks. Complete hull and turret details. Large smoke grenade launchers and main gun barrel with nicely hollowed out tubes. Exquisite suspension detail. Exterior accessory .....
...more about the Academy Plastics 1/35 US Airborne M551 Sheridan Tank

Plastic pieces are molded in tan and attached to sprue trees. Accurately reproduced hull, 75mm gun and interior details. Moveable torsion bars and realistic wheels. Extensive accessory detail parts. Realistic flexible tracks. Waterslide decals. Detailed pictorial instructions. One 1/25 Scale Panther-G Late Version Plastic Model Kit. This is a 1/25 Scale Panther-G Late Version Plastic Model Kit from Academy Hobby Models. One decal sheet with markings for two tanks. 1; .....
...more about the Academy Plastics 1/25 Panther-G Late Tank

Accurately reproduced German tank destroyer Jagdpanther static model. Exquisitely detailed hull and main gun. Highly detailed road wheels with detailed flexible tracks. Movable torsion bars. Realistic exterior equipment including tow cables, bolt cutters, shovel, jerry cans, and more. Waterslide decals for 4 German versions. 1; Germany, January 1994. 2; France, December 1944. 3; Hungary, March 1945. 4; Germany, September 1944. Illustrated assembly guide. One Plastic Model. .....
...more about the Academy Plastics 1/25 Jagdpanther WWII Tank

Plastic pieces attached to sprues and molded in grey. This vehicle filled kit provides models of three different vehicles. -German Kubelwagen. -Allied Light Utility Vehicle. -German Kettenkrad. Each vehicle is an accurate reproduction of the actual vehicles that served as the light-duty backbone of both the Axis and the Allied. forces. Many additional accessories, such as fuel cans, jerrycans, and ammo boxes are included. Add this vehicle set to any WWII diorama to produce .....
...more about the Academy Plastics 1/72 WWII Vehicle Set (3)

Accurately reproduced static display model depicting the vehicle used in the recent Iraq wars. Opening driver and hull top hatches. Majority of the external hull fittings are separate to provide good detail definition such as grab handles, liftingeyes, periscopes, tools, and engine louver panels. Headlights with separate guards. Chobham armour packages also provided for the sides & hull front. Completely detailed turret including periscopes, main sights, smoke grenades, .....
...more about the Academy Plastics 1/35 Warrior MCV Iraq 2003 Tank

Accurately reproduced static display model depicting the vehicle used in the recent Iraq wars. Build either the US Army or US Marine version. Majority of the external hull fittings are separate to provide good detail definition such as periscopes,sight optics, smoke grenade clusters, and accessories. Mesh included for the rear turret rack APU and the additional square storage rack attached to the back of that. Gunner's sight box, multi-part gun mantlet, and figure. 120mm .....
...more about the Academy Plastics 1/35 M1A1 Abrams Iraq 2003

Structurally detailed injection molded parts. Accurately reproduced hull and 75mm turret including welding and casting details. Realistic engine deck and back end. Plank armor and fording trunk. Hatches may be assembled in open or closed position.Highly detailed flexible tracks. Exquisite road wheels and suspension detail. Accessories including Jerry cans and cable. Waterslide decals for four different 1945 versions, including the L.A Bound markings. Illustrated assembly .....
...more about the Academy Plastics 1/35 M4A2 Sherman U.S. Marines

An accurate reproduction of U. S. M2A2 OIF which acted in the Iraqi war during 2003. Separate side skirts with embossed hinge and rivet details. Beautifully rendered, slide molded upper hull with side plates and skirts! Separately applied lift holds/tie-downs on the lower side of the skirts. Highly detailed, rotating turret with 30mm cannon. Continuous vinyl tracks V shaped chevrons. Realistically molded wheels and suspension. Well-defined crew and driver's hatch, which can .....
...more about the Academy Plastics 1/35 M2A2 Bradley OIF Tank

A static display model, accurately reproduced with highly detailed, injection molded polystyrene parts. Upper and lower hull parts with embossed rivet head details. A beautiful reproduction of the early version VVSS (Vertical Volute Spring Suspension) including drive sprokets, bogies, open spoked road wheels and idlers. Nicely rendered polygonal exterior. The front driver's visor can be positioned open or closed. Accurately reproduced 75mm main gun mounted in the lower .....
...more about the Academy Plastics 1/35 M3 Lee Bolted Hull Tank

A stunning model replica engineered with exquisite surface detail! Accurately reproduced hull of the late version and its 105mm Howitzer turret. Movable turret. Beautifully rendered M1 bulldozer blade. The HVSS suspension is reproduced with extreme accuracy! Faithfully rendered machine gun, jerry can, oil can and vehicle maintenance tools. Continuous vinyl tracks. Realistically molded wheels and suspension units. Waterslide decals. Illustrated assembly guide. (1) Plastic .....
...more about the Academy Plastics 1/35 M4A3 Shrmn 105mm w/M1 Dzr Blade

A stunning model replica engineered with exquisite surface detail! Hull hatches can be fixed in the open or closed position. Outstanding turret detail with 152mm cannon/Missile Launcher. Rear turret basket with meshing. Beautifully rendered. 50 caliber M2 HB anti-aircraft machine gune. Continuous vinyl tracks. Realistically detailed suspension parts and wheels. Continuous vinyl tracks. Waterslide decals. Illustrated assembly guide. (1) Plastic Model. This is a M551 Sheridan .....
...more about the Academy Plastics 1/35 M551 Sheridan Tank Gulf War

The M7 Priest was widely used by U.S. and Allied forces to provide fire support to the infantry. About 3,000 were built during the course of WWII. Highly detailed 1;35 plastic kit for static display Parts molded in dark green plastic with flexiblerubber tracks Highly detailed exterior & interior Reproduced early version of VVSS (Vertical Volute Spring Suspension) One decal sheet for four marking options. One 1;35 M7 Priest U.S. Howitzer Motor Carriage plastic model kit. .....
...more about the Academy Plastics 1/35 M7 Priest Tank

Accurately reproduced M113A3 acted in Gulf War and Iraqi War Hightly detailed interior of the A3 version Rear door can be positioned open and closed Various interior/exterior parts, accessories & storage racks Waterslide decals Illustrated asse guide. One plastic model. This is the 1/35 Scale M113A3 ''Iraq 2003'' Plastic Model Kit from Academy. Suitable for Ages 10 & .....
...more about the Academy Plastics 1/35 M113/A3 OIF

Fully reproduced rivets innumerably covered in the hull Reproduced early version of VVSS (Vertical Volute Spring Suspention) Accurately reconstructed 75mm main gun mounted on the upper hull and Royal Army type 37mm turret Waterslide decals for 2 versions 1) Royal Army, North Africa, 1943 2) Royal Army, 8th Army, El Alamein 1942 Illustrated assembly guide. One plastic model. This is the 1/35 Scale M3 Grant Plastic Model Kit from Academy. Suitable for Ages 10 & .....
...more about the Academy Plastics 1/35 M3 Grant

The Panzer IV, in its many versions, was one of the most widely used German tanks of WWII. The Panzer IV was powered by a Maybach V-12 engine which provided over 300hp and was connected to the drive sprockets via a 6-speed transmission. The H-model of this tank was introduced in 1943 and featured thicker armour to provide better protection against the Soviet T-34/85's and JS-II's. Highly detailed 1/35th scale plastic kit for static display. 257 parts in tan plastic and .....
...more about the Academy Plastics 1/35 Pz Kpfw IV Ausf.H4

The Panzer IV, in its many versions, was one of the most widely used German tanks of WWII. The Panzer IV was powered by a Maybach V-12 engine which provided over 300hp and was connected to the drive sprockets via a 6-speed transmission. The H-model of this tank was introduced in 1943 and featured thicker armour to provide better protection against the Soviet T-34/85's and JS-II's. Highly detailed 1/35th scale plastic kit for static display. 257 parts in tan plastic and .....
...more about the Academy Plastics 1/35 Pz Kpfw IV Ausf.H

The Panzer IV, in its many versions, was one of the most widely used German tanks of WWII. The Panzer IV was powered by a Maybach V-12 engine which provided over 300hp and was connected to the drive sprockets via a 6-speed transmission. The Flakpanzer IV Wirbelwind was a Panzer IV chassis with a new turret containing a 4 barrel anti-aircraft gun. The Wirbelwind was used to protect infantry and vehicles against air attack. Highly detailed 1/35th scale plastic kit for static .....
...more about the Academy Plastics 1/35 Flakpanzer IV Wirbelwind Quad 20mm Tank

Great Gift Idea
The M2 Bradley is one of the newest additions to the inventory of the U.S. Army and was used with great success during Operation Desert Storm in 1991. The Bradley is an armoured personnel carrier equipped with a turret mounted cannon, effective against enemy troops and lightly armoured vehicles. Highly detailed 1/35th scale plastic kit for static display. 285 parts in tan plastic with flexible P.V.C. tracks. Detailed chassis with individual suspension arms and road wheels. .....
...more about the Academy Plastics 1/35 M2 Bradley IFV

This vehicle set accurately depicts items that would be found in use on a WWII German airfield; - Opel Blitz fuel truck - Schwimmwagen - Bomb cart The fuel truck is highly detailed with positional doors on both the front and back of the tank. Impressively detailed Schwimmwagen. Nicely detailed bomb cart and 8 jerry cans. Waterslide decals. Illustrated assembly guide. (1) Fuel Truck. (1) Schwimmwagen. (1) Bomb Cart. Assemble a German Fuel Truck & Schwimmwagen with this .....
...more about the Academy Plastics 1/72 WWII German Fuel Truck & Schwimmwagen