Tamiya Plastic Models

Six small, thin metal saws attached to a metal frame. Useful when simulating the ''Zimmerit'' coating on 1/35 German tank models of the WWII period. Applied to the vertical surfaces of tanks to prevent magnetic mines from sticking. Saw handle available separately - No. 74018. Instruction sheet details ''Zimmerit coating simulation.''. One Set of 1/35 Zimmerit Coating Applicators. This is a 1/35 Scale Military Miniature Zimmerit Coating Applicator from Tamiya. For ages 10 .....
...more about the Tamiya 1/35 Zimmerit Coating Applicator

These parts are to be used in place of some of the standard parts within the NISMO R34 GT-R Z-tune (TAMS4282) plastic model kit. Parts include photo-etched parts for brake disks, intercooler, grille meshing, logo stencil, diff oil cooler, pedals and license plates. Also includes markings for driver and passenger seat carpet and metal muffler end. Made from stainless steel, these parts will not weather like standard brass photo etched parts. The real thin design allows them .....
...more about the Tamiya 1/24 Nismo R34 GT-R Z-Tune Photo-Etched Parts Set

Designed for use with the 2005 Peugeot 307 WRC plastic model kit (TAMS1041). Made from real thin stainless steel. This set contains photo etched parts for; - Tarmac and gravel type brake discs - Front/rear disc mount - Front grille mesh and hood air oulet mesh - Grille stencil - Radiator/intercooler core - Front hood catch pin, and rear gate catch pin - Seat belt buckles - Tow hooks Seat belt material and stickers. Illustrated assembly guide. (1) Motorcycle Stand. This is .....
...more about the Tamiya 1/24 Peugeot 307 WRC Photo Etched Parts Set

Designed for use with the NISMO GT-R V-spec II kit (TAMS4258). Quality injection molded white parts. 5-spoke wheels, large diameter brake disks, large diameter muffler end, steering wheel, side skirts for that low-down look, rear damper damping force adjustment dial, and differential oil cooler. NISMO stripe decals for the hood and doors, as well as for the instrument panel and wheels. Illustrated assembly guide. (1) Parts Set. This is the 1;24 Scale NISMO Skyline R34 GT-R .....
...more about the Tamiya 1/24 Nismo Dress-up Parts Set R34 GT-R

Designed for use with the EPSON NSX 2005 plastic model kit (TAMS1477). Made from real thin stainless steel. This set contains photo etched parts for; - Brake discs - Front air intake mesh - Rear fender air outlet mesh - One-piece and assembly typecatch pins - Tire marking stencil - Seat belt parts - EPSON NSX 2005 name plate - Front and rear tow hooks Seat belt material and stickers. Illustrated assembly guide. (1) Set of Detail parts. This is the 1;24 Scale Peugeot 307 .....
...more about the Tamiya 1/24 EPSON NSX 2005 Photo-Etched Parts Set

This parts set realistically depicts ings Z-Power wings widely used in endurance races. 3 types of injection molded wings and stays. Carbon pattern decals. Photo etched seat belt parts and hood pins. Seat belts are made with a thin red plastic material with Sabelt decals. Photo etched tow hook. Illustrated assembly guide. (1) Front Fork Set. This is the 1;24 Scale ings Z-Power Wing Parts Set from the Tamiya Detail-Up Parts Series. Suitable for Ages 16 & .....
...more about the Tamiya 1/24 Z-Power Wing Parts Set

Designed for use with the 2005 Arta NSX plastic model kit (TAMS1478). Photo etched parts made from real thin stainless steel. This set includes brake discs, front air intake and rear fender air outlet mesh, catch pins, tow hook and realistic seat belt parts. Green seat belt material. ''Takata'' seat belt stickers. Illustrated assembly guide. (1) Photo Etched Parts Set. This is a 1;24 Scale Arta NSX 2005 Photo Etched Parts Set from the Tamiya Detail-Up Parts Series. Suitable .....
...more about the Tamiya 1/24 ARTA NSX 2005 Photo-Etched Parts Detail Set

These are high quality option parts designed for adding extra realism to the 2005 Takata Dome NSX assembly kit (TAMS1481). Photo etched parts made from real thin stainless steel. A complete set which includes; * Front/rear brake disc * Front air intake mesh * Rear fender air outlet mesh * Tire marking stencil * Assembly type catch pin * One-piece catch pin * Front/rear tow hook * Seat belt buckle parts Green seat belt material. ''Takata'' seat belt stickers. Name plate. .....
...more about the Tamiya 1/24 Takata Dome NSX '05 Photo-Etched Parts Set

These are high quality option parts designed for adding extra realism to the Ferrari FXX assembly kit (TAMS1482). Photo etched parts made from real thin stainless steel. A complete set which includes; * Front nose air intake mesh * Door air intakemesh * Rear cowling upper air outlet mesh * Rear end air outlet mesh * Assembly type catch pin * One-piece catch pin * Front tow hook * Seat belt buckle parts Red seat belt material. Name plate. Illustrated assembly guide. (1) .....
...more about the Tamiya 1/24 Ferrari FXX PE Parts Set

These are high quality option parts designed for adding extra realism to the SC430 GT assembly kit (TAMS1483). Photo etched parts made from real thin stainless steel. Front air intake mesh. Rear bumper air duct mesh. Front and rear brake discs. Catch pins for front hood and rear gate. Front and rear tow hooks. Metal seat belt buckels. Blue and green seat belt material. Stickers for belt pad. Stencil for tire logo. Illustrated assembly guide. (1) Photo Etched Parts Set. This .....
...more about the Tamiya 1/24 SC430 PE Parts

Adds extra realism to the front and rear suspension Gold anodized aluminum outer fork, fork top and front and rear reserve tanks Yellow-colored metal rear coil spring adds an extra suspension highlight. Aluminum front fork outer tube, fork cap, brass front fork inner tube aluminum front and rear reserve tank, metal painted rear coil spring, plastic axle/steering damper. This is the optional Front Fork set for the Kawasaki Ninja ZX-RR from Tamiya, .....
...more about the Tamiya 1/12 Kawazaki Ninja ZX-RR Front Fork Set

Includes 5 figures. A standing driver figure is included. Includes decals for Subaru or Peugot mechanics. The positions of the arms and legs on the figures can be modified. Also includes accessory items such as; impact wrench, platform, oil jug, laptop computer, parts box, tools & tray, jack, tool case and jack stand.. A 1/24 Scale Rally Mechanics Plastic Model .....
...more about the Tamiya 1/24 Rally Mechanics Set

These parts are to be used in place of the nylon mesh supplied standard in Tamiya's 1/35 M1 Abrams series of tanks. -M1A2 Abrams Operation Iraqi Freedom (TAMS0239). -M1A1 Abrams (TAMS2256). -M1A1 Abrams w/Mine Plow (TAMS3558). Allows you to reproduce the upper hull grille, machine gun mount rail around the loader's hatch, and the bustle rack on the hull rear more accurately and realistically. Made from stainless steel, these parts will not weather like standard brass photo .....
...more about the Tamiya 1/35 US M1A1/A2 Photo-Etched Parts Set

...more about the Tamiya Fieseler Storch Display Stand

...more about the Tamiya 1/48 Lockheed F-16 Detail Parts Photo-Etched

Exquisite cockpit detail Superb landing gear bay details Beautifully reproduced landing gear struts Highly detailed pilot figure Optional clear or smoked bubble top canopy, which can be fixed in the open or closed position A variety of realistically rendered weapons Waterslide decals Illustrated assembly guide. One plastic model. This is a 1/48 Scale Lockheed Martin F-16C (Block 25/32) Fighting Falcon ANG Plastic Model Kit by Tamiya. Suitable for Ages 10 & Older. Two .....
...more about the Tamiya 1/43 Lkhd F-16C Block 25/32 ANG

Clear, dustproof detachable cover for classy display effect. Broad black base designed to hold 1/20 F-1 and 1/24 car models. Case is packaged in bubble-wrap for full protection in box. A shiny silver Tamiya sticker is included, designed to attach to the case's indentation on top. One Display Case for 1/20 F-1 and 1/24 Car Models. This is Display Case C for 1/20 F-1 and 1/24 Car Models from .....
...more about the Tamiya 1/20-1/24 Display Case C

High-quality, clear acrylic resin display cover. 3mm thick, hand-assembled panes. Protects from dust and humidity. Perfect for displaying 1;12 Big Scale models. (1) Display Cover. This is the Tamiya Display Case .....
...more about the Tamiya 1/12 Display Case G 6.9x18x10'' w/o Base