This is a 1/24 - 1/25 Scale Stock Car Hood Hinges from Detail Master. It's for extremely skilled and advanced modelers. Features: * .014" diameter Berkeley Trilene nylon fishing line included in package, used to help make the hinge pins in kit. * Black wire included in kit with copper wire inside, used to make a hinge pin mounting tube. * Photo-etched hood pivot brackets, both short drilled style and longer, undrilled style for single prop brackets used on the right. * side of trunk. * Extremely detailed instruction sheet for construction directions.
...more about the Detail Master R/C 1/24 Stock Car Hood Hinges Sup
|
This is a 1/24 Scale Package of Hose Clamps from Detail Master. It's for average level modelers. Features: * Kit includes several hose clamp lengths for a multitude of needs - small engine hoses to larger coolant hoses. * Thin etched hose clamps attached in a small rectangular sprue frame. * Use clamps on single hoses or like a tie wrap around many wires together. * Small length of wire to simulate "worm gear" on a real clamp. * Much easier and more realistic than foil strips. * For 1/24 scale models.
...more about the Detail Master R/C Hose Clamps
|
This is a 1/24 - 1/25 Detail Master Easy Skill Level Set of Photo-Etched Speaker Grilles #2. Features: * Various shaped and different sized photo-etched stereo speaker grilles attached to a frame. * Speaker grilles resemble stereo speakers within a 1/24 - 1/25 model car. * Grille shapes include circular, oval, rectangular and square. * May be painted black (most common) or any complimenting color to match chosen car's interior. * Easy to use speaker parts add a nice finishing touch to selected project. * Complement speakers with Detail Master #2530 radio faces for dashboard of car.
...more about the Detail Master R/C Speaker Grilles #2
|
This is a 1/24 - 1/25 Scale Detail Master Set of Photo-Etched Engine Brackets for Model Cars. It's for Advanced Modelers. Features: * Engine brackets give you lots of options for mounting your engine components. * Can be used on alternators, pulley systems, compressors and more. * Easy to use parts add a nice finishing touch to chosen project. * Detailed general instructions for assembly.
...more about the Detail Master R/C Engine Brackets
|
This is a 1/24 - 1/25 Detail Master Set of Photo-Etched Radio Faces Parts for Model Car. It's for average/advanced modelers. Features: * Parts used for upgrading model cars with a modern stereo system. * Simply paint, cut them out, and glue parts to car dashboard. * CD and cassette pieces included to scatter around the interior for authenticity, plus radio parts for dash. * Easy to use parts add a nice finishing touch to chosen project. * Radio parts may be painted any chosen color, though black is the most common color. * For more stereo/radio authenticity, add Detail Master Speaker Grilles #2 (#2500). Many styles and sizes to choose from. * Detailed general instructions f
...more about the Detail Master R/C Radio Faces
|
This is a set of Two Moon Tank Kits for 1/25 scale models. Detail Master's classic Moon Fuel Tank is just like the real thing. Nothing looks better on street rods, customs, or nostalgia drag racing models. Features: * Detailed instructions included.. * Two bracket styles (thin stainless steel - bright and durable).. * Highly authentic looking; adds greatly to scale realism..
...more about the Detail Master R/C Moon Tanks (2)
|
|
|
This is an 8-piece set of #2 Compression Fittings from Detail Master. Used for 1/24, 1/16, 1/12, and 1/43 scale models. For ages 12 and over. Compression fittings are the transition piece between flexible braided line and the hard line (pipe). It is distinguished by the tapered end, which always points toward the braid. It is usually anodized red, or sometimes natural finished aluminum. Features: * Fittings are machined, not molded.. * Natural finished aluminum may be painted..
...more about the Detail Master R/C Compression Fitting #2(8)
|
|
|
|
This is an 8-piece set of #5 Compression Fittings from Detail Master. Used for 1/24, 1/16, 1/12, and 1/43 scale models. For ages 12 and over. Compression fittings are the transition piece between flexible braided line and the hard line (pipe). It is distinguished by the tapered end, which always points toward the braid. It is usually anodized red, or sometimes natural finished aluminum. Features: * Fittings are machined, not molded.. * Natural finished aluminum may be painted..
...more about the Detail Master R/C Compression Fitting #5(8)
|
This is an 8-piece set of #6 Compression Fittings from Detail Master. Used for 1/24, 1/16, 1/12, and 1/43 scale models. For ages 12 and over. Compression fittings are the transition piece between flexible braided line and the hard line (pipe). It is distinguished by the tapered end, which always points toward the braid. It is usually anodized red, or sometimes natural finished aluminum. Features: * Fittings are machined, not molded.. * Natural finished aluminum may be painted..
...more about the Detail Master R/C Compression Fitting #6(8)
|
|
|
|
|
|
|
This is an 8-piece #3 Miniature Combination Fitting set for plastic scale models. It's made by Detail Master for ages 12 and older. Features: * Saves money and time, since all fittings are machined as one piece.. * Combination fittings are used where no elbows or pipe bends are required.. * Machined aluminum..
...more about the Detail Master R/C Combination Fitting #3 (8)
|
This is a 1/24 - 1/25 Scale Black Wired Distributor Kit from Detail Master. It's for average to advanced modelers. Features: * Highly realistic parts that are easy to assemble by following careful directions.. * Includes distributor body with cap clips, drive shaft, ignition wire, wire boots, wire looms, and hex shapes for plugs.. * Black wire, black plug boot wire, and photo-etched parts included.. * Detailed and clear instructions included for wired distributors..
...more about the Detail Master R/C Wired Distributor Kit Black
|
|
|
|
This is a 1/24 - 1/25 Scale Red Wired Distributor Kit from Detail Master. It's for advanced modelers. Features: * Highly realistic parts that are easy to assemble by following careful directions. * Includes distributor body with cap clips, drive shaft, ignition wire, wire boots, wire looms, and hex shapes for plugs. * Red wire, black plug boot wire, and photo-etched parts included. * Detailed and clear instructions included for wired distributors.
...more about the Detail Master R/C Wired Distributor Kit Red
|
This is a 1/24 - 1/25 Scale Light Blue Wired Distributor Kit from Detail Master. It's for average to advanced modelers. Features: * Highly realistic parts that are easy to assemble by following careful directions. * Includes distributor body with cap clips, drive shaft, ignition wire, wire boots, wire looms, and hex shapes for plugs. * Light blue wire, black plug boot wire, and photo-etched parts included. * Detailed and clear instructions included for wired distributors.
...more about the Detail Master R/C Wired Distributor Kit Light Blue
|
Features: * Highly realistic parts that are easy to assemble by following careful directions. * Includes distributor body with cap clips, drive shaft, ignition wire, wire boots, wire looms, and hex shapes for plugs. * Orange wire, black plug boot wire, and photo-etched parts included. * Detailed and clear instructions included for wired distributors.
...more about the Detail Master R/C Wired Distributor Kit Orange
|
This is a 1/24 - 1/25 Billet Aluminum Fire Extinguisher Kit from Detail Master. It's for modelers of average skill level and above. Features: * Realistic billet aluminum fire extinguisher for 1/24 - 1/25 racing vehicles.. * Complete kit includes brackets, release nozzle, and mounting hardware, all photo-etched parts.. * Kit includes two different mounting bracket styles: Style A: cockpit mounted fire extinguisher with a manual squeeze handle; Style B: mounting system for a remote activated fire bottle system.. * Style A seen on many older race cars of many types.. * Style B seen on the front of funny cars and high performance modern race cars.. * Oval shaped levers for the
...more about the Detail Master R/C Fire Extinguisher Kit
|
|
|
|
|
|
This is a 1/24 Street Magneto Kit with Red Wire from Detail Master. It's for average to advanced modelers. Features: * Vintage-style magnetos work well on old street rods, customs, and drag racers.. * Complete kit includes a mag top plate, nameplate, wire looms, and the ignition wire.. * Mag body may be painted any color.. * Detailed and clear instructions..
...more about the Detail Master R/C Street Magneto Red Wire
|
This is a Package of 3 Pulleys that make up a Stock Drive Set for 1/24 - 1/25 Scale Models. For modelers of average skill level and above from Detail Master. Features: * 3 billet pulley pieces: crank pulley, alternator/generator pulley (smallest), and fan pulley.. * Machined from real billet aluminum for a very realistic look.. * Black hose included to simulate belt parts; black masking tape may also be used.. * For 1/24 - 1/25 scale model cars.. * Clear general instructions for assembly..
...more about the Detail Master R/C Stock Drive Set 3 Pulley
|
This is a Package of Two 1/24 - 1/25 Glass Pack Billet Mufflers from Detail Master. It's for modelers of average skill level and above. Features: * Two small billet glass pack mufflers for the exhaust system on a 1/24 - 1/25 model car.. * Mufflers are circular and shaped in a tube form.. * Pieces are easy-to-use and add a nice realistic finishing touch to selected vehicle.. * Simply glue mufflers to the existing exhaust system on car.. * Use mufflers as they are, or lightly polish them with metal polish..
...more about the Detail Master R/C Glass Packs (2)
|
