Two aluminum end plates. Two large plywood hold down pieces. Two small plywood hold down pieces. Two 1/4'' wing jig rods. Two wing nuts. Four #8 x 1/2'' wood screws. Two 6-32 bolts. One 1/2'' wood center brace. Two 1/2'' wood base pieces. One instruction booklet. The Wing Jig holds wing ribs in perfect alignment during construction. It will accomodate a 34'' panel to build up to a 68'' tapered wing. Constant chord wings can be built to any size. All hardware is included.
.....
...more about the Great Planes Wing Jig Kit
|
Multiple-section, finger-jointed wood construction resists warping, so modelers can build with greater confidence. Fine wood grain surface and uniform density accepts T-pins easily. Parts are T-pinned in place over the plans on top of the board, so the airplane structure can be built and then glued once the parts are in position. This board is designed for small projects. One Small size 12x24x3/4 Pro Building Board. This is a Small size 12x24x3/4 Pro Building Board from
.....
...more about the Great Planes Pro Building Board 12x24x3/4''
|
Multiple-section, finger-jointed wood construction resists warping, so modelers can build with greater confidence. Fine wood grain surface and uniform density accepts T-pins easily. Parts are T-pinned in place over the plans on top of the board, so the airplane structure can be built and then glued once the parts are in position. This board is designed for planes up to. 40 size models. One Medium size 16x36x3/4'' Pro Building Board. This is a Medium size 16x36x3/4'' Pro
.....
...more about the Great Planes Pro Building Board 16x36x3/4''
|
Multiple-section, finger-jointed wood construction resists warping, so modelers can build with greater confidence. Fine wood grain surface and uniform density accepts T-pins easily. Parts are T-pinned in place over the plans on top of the board, so the airplane structure can be built and then glued once the parts are in position. This board is designed for large assembly projects. One Large size 16x48x3/4'' Pro Building Board. This is a Large size 16x48x3/4'' Pro Building
.....
...more about the Great Planes Composite Building Board 16x48x3/4''
|
Direct Replacement Part. Used For Holding Down All Of The Different Accessories To The Building Board. Ten Magnets. Twenty Steel Plates. These Magnets Are Used With The Magic Magnet Building Board
.....
...more about the Great Planes Magic Magnets
|
This 90 degree alignment jig makes model building easy. Slotted for 1/16'', 3/32'' and 1/8'' thick wing ribs. For use on bulkheads, horizontal and vertical tail and fuselage sides. Can also be used as a thickness gauge. Orange plastic construction. One Up-Right 90 Degree Alignment Jig. This is the Up-Right 90 Degree Alignment Jig from House of
.....
...more about the House of Balsa Upright 90 Degree Alignment Jig
|
The ideal replacement belts for use with the Mini-Sander sanding block (ADCR1001). Aluminum-Oxide. 120 grit. Continuous green colored sandpaper on durable cloth. Three Continuous Belts. This Package Contains Three Replacement Continuous Belts (120grit) by Applied
.....
...more about the ADC Contour Belt Mini Sander Medium (3)
|
A proper foundation for painting is the most important part in finishing a model!. This finishing abrasive is clog resistant type. Three different grits. Gray colored on paper backing. Cut to desired size. Five Finishing Abrasive Sheets. This is aTamiya Finishing Abrasives Set
.....
...more about the Tamiya Finishing Abrasives Medium
|
Perfect for polishing and restoring new and old paint finishes. Can be used wet and dry. Works well also on clear arcylic and styrene surfaces. Super fine grit. One double-sided super fine sanding stick. This is the Hobbico Flexible Super Fine Sanding Stick. Flexible sanding stick for hard-to-reach
.....
...more about the Hobbico Flexible Sanding Stick Super Fine
|
Individual Micro-Mesh abrasive pad. Use wet or dry. Perfect for polishing new paint surfaces and restoring old finishes. Works great on restoring clear acrylic and styrene surfaces. 2'' x 2'' (51mm x 51mm) pad, 3200 grit. One double-sided 3200 grit micro-mesh pa. This is the 3200 Grit Micro-Mesh Pad from Hobbico. Micro-Mesh provides a modeler the ability to create professional quality finishes for plastic or die-cast
.....
...more about the Hobbico Micro-Mesh Soft Touch Abrasive Pad 2x2 3200 Grit
|
A versatile, adjustable tension hand belt sander. Continuous Green colored sandpaper on durable cloth. Firmly holds paper for easier sanding. Padded flats and curves. Handy to hold and easy to use!. Precision die-cut replacement sanding belts. Uses medium and fine garnet strips. Fine, extra fine, and super fine wet or dry strips. A perfect companion for the Mini-Tee-Bar (ADCR1060 or ADCR1070). Directions printed on package. For hobby, home, or shop. One Mini Sander with
.....
...more about the ADC Mini Sander w/Continous Belt
|
The ideal replacement belts for use with the Mini-Sander sanding block (ADCR1001). Aluminum-Oxide. 220 grit. Continuous Green colored sandpaper on durable cloth. Three Continuous Belts. This Package Contains Three Replacement Continuous Belts (220grit) by Applied
.....
...more about the ADC Contour Belt Mini Sander Fine (3)
|
Ever-taut sanding belt (patented locking principle) mechanism snaps into place with a finger pull. Small and large radiuses; fits into small concave recesses and large; over small and large beads. Knife-edge sides; sands as close to right angle fittings and meets as the edge of sandpaper itself. Sandpaper saver; mini-sander makes every square inch of sandpaper work..no waste with ingenious fastening clip. One Adjustable Tension Mini-Sander (Blister Carded). This is an
.....
...more about the ADC Mini Sander Blister Card
|
Precision die-cut to fit the mini-sander. Pre-scored to make folding and belt installation easier. Quality sandpaper that cuts better, sands smoother, lasts longer. Garnet grit selection is designed to be used with wood. (12) Mini Sander Replacement Belts (fine). This is a set of Mini Strips is designed to be used with Applied Designs Mini-Sander
.....
...more about the ADC Mini Sander Belt Fine
|
Precision die-cut to fit the mini-sander. Pre-scored to make folding and belt installation easier. Quality sandpaper that cuts better, sands smoother, lasts longer. Garnet grit selection is designed to be used with wood. (12) Mini Sander Replacement Belts (Medium). This is a set of Mini Strips is designed to be used with Applied Designs Mini-Sander
.....
...more about the ADC Mini Sander Belt Medium
|
Precision die-cut replacement sanding belts for your Mini-Sander. This display includes the following assortment. -Water Proof Garnet (2). -Fine Garnet (180 Garnet) (4). -Medium Garnet (100 Garnet) (6). Installation instructions provided with each.. This Is A Display of 12 Mixed Replacement Sanding Mini-Strips for Your Mini-Sander by Applied
.....
...more about the ADC Mini Sander Replacement Belt Asst (138)
|
Precision die-cut replacement sanding belts for your Mini-Sander. This assortment includes the following. -500 grit (3). -320 grit (3). -220 grit (3). Paper mini-strips. Waterproof. Installation instructions provided with each. 9 Assorted Waterproof Replacement Mini-Strips. This Is An Assortment of 9 Waterproof Replacement Mini-Strips for Your Mini-Sander by Applied
.....
...more about the ADC Mini Sander Belt Waterproof
|
Aluminum Mini-Tee Bar is ideal for straight and flat sanding. Will not wear out. Permanently anodized. Handy to hold. Easy to use. Mini-Tee may be used in the home or the shop (walls, wood, tables). May be used for R/C modeling, crafts or hobbies.One Tee Bar. Three sheets of self-adhesive sandpaper. This is a Mini Tee Bar and Sandpaper by Applied
.....
...more about the ADC Mini-Tee Bar w/Sandpaper
|
Enables modeler to sand over large areas, eliminating high spots and creating smooth, consistant surfaces for covering. It is great for wing ribs. One 22'' Aluminum Tee Bar. This is an 22'' Tee Bar Sander from Applied
.....
...more about the ADC Tee-Bar w/o Sandpaper 22''
|
A sanding block is a simple, yet effective tool which increases the efficiency of the sandpaper, allowing you to remove greater quantities of wood more quickly Come with one piece of fitted sandpaper (grit not listed) Can be used with other sandpaper of assorted grits Wood construction A small wood wedge is provided to hold the sandpaper as you work your way through from the roughest paper to the finest paper. One Sanding Block with sandpaper and wood wedge. This is the
.....
...more about the Constructo Sanding Tool w/Sandpaper
|
This handy tool is designed for sanding in those hard to reach places. The design of the sanding stick allows you to rotate the belt so all areas may be utilized. Spring loaded tensioner allows belt to stay in place and the tapered end permits easy access for minute detail. Made of high impact, chemical resistant material. Use dry or with water, acetone, kerosene or oil. Includes two #80 grit sanding belts. Carded packaging. One Sanding Stick with One Extra Belt. This is a
.....
...more about the Excel Hobby Blades Sanding Stick w/1 Belt
|
|
The Miter Sander allows the craftsman to sand very accurate angles. Perfect for truss construction, any angle and its complement can be sanded easily and accurately using the Miter Sander. Constructed of durable hardwood and glass filled nylon (light colored wood). Sanding block comes with two different grits of replaceable sandpaper. Black plastic adjustable fence swings through an arc of precise degree marks (this allows the modeler to make accurate repeatable. angles for
.....
...more about the Fourmost Miter Sander
|
Design allows access to narrow, hard to reach areas. Unique shape allows easy replacement of sandpaper without use of adhesives. Rounded and flat sanding surfaces. One sanding stick (with sandpaper). One sandpaper template. This is the Fourmost Sanding
.....
...more about the Fourmost Sanding Stick
|
|
|
Sanding blocks machined to form precision angles from 1 to 8 degrees. Pre-applied sand paper (grit not listed). One sanding block for 1 to 4 degrees. One sanding block for 6 to 8 degrees. This is the Fourmost Sander Angle Slides for use with the Fourmost 154 Miter Sander
.....
...more about the Fourmost Sander Angle Slides #154 Miter Sander
|
Perfect for working on small projects in tight places. Constructed of durable.055'' aluminum (innovative contour shape). Sanding surface stays flat to +/-.008'' (perfect for balsa sheeted wings). Sander sands smoothly and accurately with great results every time. One Easy Touch Hand Sander. One Sheet 80 grit 2-1/4'' x 5.5'' Adhesive Backed Sandpaper. One Sheet 150 grit 2-1/4'' x 5.5'' Adhesive Backed Sandpaper. One Sheet 220 grit 2-1/4'' x 5.5'' Adhesive Backed Sandpaper.
.....
...more about the Great Planes Easy-Touch Hand Sander 5.5''
|
Perfect for working on small projects in tight places. Constructed of durable.055'' aluminum (innovative contour shape). Sanding surface stays flat to +/-.008'' (perfect for balsa sheeted wings). Sander sands smoothly and accurately with great results every time. One Easy Touch Hand Sander. The Easy-Touch Hand Sander is the ideal sanding tool for home and hobby
.....
...more about the Great Planes Easy-Touch Bar Sander 11''
|
Perfect for working on small projects in tight places. Constructed of durable.055'' aluminum (innovative contour shape). Sanding surface stays flat to +/-.008'' (perfect for balsa sheeted wings). Sander sands smoothly and accurately with great results every time. One Easy Touch Hand Sander. The Easy-Touch Hand Sander is the ideal sanding tool for home and hobby
.....
...more about the Great Planes Easy-Touch Bar Sander 22''
|
Great Gift Idea
