This is a Pin Vise from Zona Tool Co. Features: * This steel pin vise has a chuck capacity of 0.8 to 1.5mm (.03-.06"). * Holds wire, rod, drills, taps, reamers and other small tools. * Can be used in stationary drill press chuck as an adapter for small drills and taps. * Carded packaging.
...more about the Zona Tool Co. Pin Vise
|
This is a Pair of 5-1/2" Straight Hemostats from Bru Line Industries. Features: * All stainless steel construction. * Used for modeling, heat sink for electronics, clamping fuel lines, holding small parts, etc.
...more about the Bru Line Hemostat-Straight 5-1/2''
|
This is a Pair of 3-1/2" Curved Hemostats from Bru Line Industries. Features: * All stainless steel construction. * Used for modeling, heat sink for electronics, clamping fuel lines, holding small parts, etc.
...more about the Bru Line Hemostat-Curved 3-1/2''
|
This is the Dremel Multi-Vise. Attaches to any workbench or table up to 2-1/2" (63mm) thick. Features: Ball and socket design allows vise to rotate 360 and tilt 50 Jaw width is 7-1/2" and can be detached to be used as a stand-alone bar clamp Quick release button for easy and fast operation Large cushioned pads protect delicate pieces from being damaged Vise pads have "V-Grooves" to secure round and odd-shaped objects Rotary tool holder holds tools in place for easy sanding, grinding, polishing and much more.
...more about the Dremel Mfg. Co. Multi-Vise
|
This is the Duratrax Shock Shaft Holding Tool. Features: * Made of machined brass. * Grooved sides for better grip and control. * Will not scratch shafts like when using pliers. * Greatly eases the threading of ends to the rod. * Compact size fits in a pocket.
...more about the Dura Trax Shock Shaft Tool
|
This is a Swivel Head Pin Vise from Gyros Products. Features: * Used for holding tiny drill bits, taps, reamers, cutters/routers, pins, scribing/etching needles, wire, screws, wooden polishing. * sticks, etc. * Two double-ended collets are conveniently stored in the barrel when not in use. * Carded packaging.
...more about the Gyros Products Co Swivel Head Pin Vise
|
This is a Mini Vise from Gyros Products. Features: * Spring loaded Mini Vise is ideal for handwork such as filing, sawing, finishing, etc. * Lightweight steel "I-beam" construction maintains parallel jaw alignment. * Spring-loaded jaws allow for quick and easy insertion of workpieces. * Compact design takes up minimal space, yet provides large capacity, strength and unusual accuracy when working with small parts. * Carded packaging.
...more about the Gyros Products Co Mini Vise
|
This is the Hobbico Multi-Angle Hobby Vise. Attaches to any workbench. Features: * Heavy cast aluminum construction. * Enamel coated body and chrome-plated, cold rolled steel screws adds to the durability. * Removeable rubber jaw covers-covers prevent marring and protect delicate objects. * Large C-clamp mount attaches to work surfaces up 2" (51mm) thick. * Rotates 360 degrees. * Ball pivot allows it to adjust to any angle.
...more about the Hobbico Multi-Angle Hobby Vise
|
This is a Hull Planking Vise from Latina. Features: * Top quality beechwood vise works as a model maker's third hand. * Allows you to work on the model with both hands free and with the model in any position desired.
...more about the Latina Hull Planking Vise
|
Amazing mini-vise, it's better than a third hand! This PV Jr. will save you time and effort! It's an invaluable work-bench or table-top tool which you'll use for many years. Features: * Tilts, turns and rotates (a full range of movement). * Fine/Course adjusting knob. * Vertical/horizontal jaw grooves help hold work. * Jaws are heat tolerant to 350 degrees (continuous). * The base bolt circle is 4-5/16" and fits all PanaVise base mounts. * Hundreds of uses (soldering, assembling, gluing, cutting, painting, drilling, polishing, jewelry and fly tieing to name a few).
...more about the Panavise Panavise Junior
|
The 301 Standard PanaVise is the all-purpose work holding unit. It tilts, turns and rotates. This combination consists of the 300 standard base and the 303 Standard Head with 343 Nylon jaws. Just one convenient control knob locks the work firmly in any position. Features: * Durable #66 nylon jaws open 2-1/4" and are 2-1/2" wide. * Jaws offer excellent electrical insulation and gentle holding power. * Nylon jaws will withstand intermittent heat to 300 degrees F (149C) or continuous 200 degree F (93C). * General purpose head has exceptional quality/strength. * BASE AND HEAD ARE FULLY INTERCHANGEABLE WITH OTHER 300 SERIES Bases and Heads. * Base has a patented Black control kn
...more about the Panavise Standard Panavise
|
This is the 381 Panavise vacuum base. It is a combination of the 380 base and the 303 Standard Head. It tilts, turns and rotates. Just one conenient control knob locks the work firmly in any positon. Features: * Durable #66 nylon jaws open 2-1/4" and are 2-1/2" wide. * Jaws offer excellent electrical insulation and gentle holding power. * Nylon jaws will withstand intermittent heat to 300 degrees F (149C) or continuous 200 degree F (93C). * General purpose head has exceptional quality/strength. * BASE AND HEAD ARE FULLY INTERCHANGEABLE WITH OTHER 300 SERIES Bases and Heads. * Base has a patented Black control knob which "tilts, turns and rotates", it also features an exclus
...more about the Panavise Vacuum Base Panavise
|
This is the Adjustable Hand Vise from Squadron Tools. Features: * Jaws open to a maximum width of 1.02" (26mm). * Holes drilled on top of each jaw enable steel pins to be placed in needed locations to help hold item securely. * Many hobby, craft and radio control uses, holds small items for painting, assembling and so on. * Finished tapered wooden handle.
...more about the Squadron/Signal Adjustable Figure Vise
|
|
|
|
|
|
|
This is a Fine Pin Vise D from Tamiya. Features: * Used for holding tiny drill bits, taps, reamers, cutters/routers, pins, scribing/etching needles, wire, screws, wooden polishing. * sticks, etc. * Will hold 0.1mm to 3.2mm diameter objects. * Carded packaging.
...more about the Tamiya Fine Pin Vise D
|
This is a Fine Pin Vise S from Tamiya. Features: * Used for holding tiny drill bits, taps, reamers, cutters/routers, pins, scribing/etching needles, wire, screws, wooden polishing. * sticks, etc. * Will hold 0.1mm to 1.0mm diameter objects. * Carded packaging.
...more about the Tamiya Fine Pin Vise S
|
The Pin Vise Set is crafted for use with light wood, plastic and light medal. It has small to medium drill bits and is very durable. This double-ended pin vise has an aluminum handle which provides great performance.
...more about the X-acto Pin Vise Set
|
|
|
It has 2 alligator clips on each side. These clips are flexible and allow for a more accurate results. The clips allow you to hold your work in many positions. The base is weighted for stablity. It is perfect for those jobs that require your hands to be free.
...more about the X-acto Extra Hands Dual Alligator Clamp
|
 Great Gift Idea
This Magnifier is complete with "extra hands." It has 2 alligator clips on each side of the magnifying lens. These clips are flexible and allow for a more accurate results. This 2X magnifier is capable of precise work. The base is weighted for stablity. It is perfect for those jobs that require your hands to be free.
...more about the X-acto Extra Hands & Magnifier
|
|
This is a Wood Handle Tool Holder with Two Collets from Zona Tool Co. Features: * This holder comes with two collets with capacity range of 0" to .118" diameter. * Ideal for use with small tools including: chisels, files, reamers, beading tools, burs and gravers. * Carded packaging.
...more about the Zona Tool Co. Wood Handle Pin Vise
|
This is a Swivel Head Pin Vise from Zona Tool Co. Features: * This pin vise comes with two double ended collets in the handle with 0" to .125" (1/8") capacity range. * Holds any small tool with a round shank, including drills, burs, reamers, taps, needles, scribers, etc. * Revolving head makes drilling and tapping easier.
...more about the Zona Tool Co. Swivel Head Pin Vise
|
This is a Double Ended Pin Vise from Zona Tool Co. Features: * This pin vise has two reversible steel chucks. * Four chuck sizes: 0-1.2mm (0-.05"), 0.8-2.0mm (.03-.08"), 1.3-2.4mm (.05-1"), and 1.8-2.9mm (.07-1.1"). * Use with drills, miniature reamers, files, etc. * Carded packaging.
...more about the Zona Tool Co. Double Ended Pin Vise
|
This is a 1.3mm-3.1mm Pin Vise from Zona Tool Company. Features: * Strong Steel Construction. * Black in Color. * .05"-.125" Capacity. * Holds wire, rod, drillls, taps, reamers and other small tools. * Can be used in stationary drill press chuck as an adapter for small drills and taps. * Accepts Chucks from 1.3mm to 3.1mm.
...more about the Zona Tool Co. Pin Vise 1.3-3.1mm
|
This is a Mini Vise from Zona Tool Co. Features: * Zinc diecast vise for holding small flat or round pieces for drilling or grinding. * Has horizontal "V" grooves for holding rod and tubing. * Use with drill press, rotary tools or hand tools. * Also has mini anvil for hammering and flattening small parts. * Carded packaging.
...more about the Zona Tool Co. Mini Vise
|
|
