Plastic Models

Steel taps and drills for preparing holes to accept bolts. 2.0mm tap and.0619 drill. 2.5mm tap and.0776 drill. 3.0mm tap and.0978 drill. 4.0mm tap and.1300 drill. 5.0mm tap and.1637 drill. This is a 10-piece Tap and Drill Set from Great
...more about the Great Planes 10pc Metric Tap & Drill Set

It is used to slowly and precisely turn drill bits, taps, and whatever else will fit inside its metal 1/4'' adjustable chuck. One Tap Handle. This is the Great Planes Tap
...more about the Great Planes Tap Handle

Has the uncommon 1/4-32 thread used on glow plugs. Made by the USA's largest threading tool manufacturer. Rethreading all glow plugs with this die eliminates the chance of installing an improperly threaded plug and ruining your engine's. head. One Glow Plug Die. This is a Glow Plug Die from
...more about the Harry B. Higley Glow Plug Die

This tap has the uncommon 1/4-32 thread used on glow plugs. Made by the USA's largest threading tool manufacturer. Cleans fouled threads in a cylinder head. One Glow Plug Tap. This is a Glow Plug Tap from
...more about the Harry B. Higley Glow Plug Tap 1/4-32

Even experienced modelers have difficulty drilling and tapping holes for wing bolts, and a motor mount presents an even greater. challenge-these Tap-N-Drill Guides make these operations simple and. assure success every time. Includes guide holes fo r the taps and drills you use most. Handles common drills from 1/16'' to 1/4'' and all taps and drills from 2-56 through 1/4''. One Three Piece Tap-N-Drill Guide Set. This is a Three Piece Tap-N-Drill Guide Set from
...more about the Harry B. Higley Tap/Drill Guide Set (3)

Solid steel construction. Holes provided for 1/4'' and #10 wing bolts. Easily drill perfect holes for the bolts used to hold the wings to the fuselage of a plane. One Drilling Guide. This Is Harry's Old Fashion Wing Bolt Drilling Guide from Harry B
...more about the Harry B. Higley Wing Bolt Drilling Guide

A must for the scratch builder, modeler, etc. Rethreads 0-80 thread pattern. One 0-80 Die. This is a 0-80 Die from K & S
...more about the K & S Die 0-80

A must for the scratch builder, modeler, etc. Rethreads 1-72 thread pattern. One 1-72 Die. This is a 1-72 Die from K & S
...more about the K & S Die 1-72

A must for the scratch builder, modeler, etc. Rethreads 2-56 thread pattern. One 2-56
...more about the K & S Threaded Die 2-56

A must for the scratch builder, modeler, etc. Rethreads 3-48 thread pattern. One 3-48 Die. This is a 3-48 Die from K & S
...more about the K & S Die 3-48

A must for the scratch builder, modeler, etc. Rethreads 4-40 thread pattern. One 4-40 Die. This is a 4-40 Die from K & S
...more about the K & S Threaded Die 4-40

Holds dies securely during rethreading process. Fits up to 13/16'' diameter dies. One Die Handle. This is a Die Handle from K & S
...more about the K & S Die Handle

A must for the scratch builder, modeler, etc. Taps 0-80 thread pattern. One 0-80 Tap. This is a 0-80 Tap from K & S
...more about the K & S Tap 0-80

A must for the scratch builder, modeler, etc. 1-72 thread pattern. One 1-72 Tap. This is a 1-72 Tap from K & S
...more about the K & S Tap 1-72

A must for the scratch builder, modeler, etc. 2-56 thread pattern. One 2-56 Tap. This is a 2-56 Tap from K & S
...more about the K & S Replacement Tap 2-56

A must for the scratch builder, modeler, etc. 3-48 thread pattern. One 3-48 Tap. This is a 3-48 Tap from K & S
...more about the K & S Tap 3-48

A must for the scratch builder, modeler, etc. 4-40 thread pattern. One 4-40 Tap. This is a 4-40 Tap from K & S
...more about the K & S Replacement Tap 4-40P

Builder's Mat. Durable three layer construction provides a firm base for any cutting job. Green non-reflective self healing surface. Many handy markings printed on the surface, including. Horizontal rulers, metric and standard. 2'' star template. 3 0 45 and 60 angles. 1'' graph background. Modeling Knife. Constructed of aluminum with 4-jaw chuck to insure blade lock and plastic safety cap to cover blade when not in use. Serrated section near blade and at center of handle
...more about the Hobbico Builder's Cutting Mat 9x12'' w/Hobby Knife

Durable three layer construction provides a firm base for any cutting job. Green non-reflective surface. Many handy markings printed on the surface, including. Horizontal rulers, metric and standard. 2'' star template. 30 45 and 60 angles. 1'' g raph background. One Hobbico 9''x12'' (228mm x 305mm) Builder's Cutting Mat. This is the Hobbico 9''x12'' (228mm x 305mm) Builder's Cutting
...more about the Hobbico Builder's Cutting Mat 9x12''

Many Handy Markings Printed on the Surface, Including; Vertical rulers, metric and standard Horizontal rulers, metric and standard 2'' and 3'' star templates 30, 45, and 60 degree angles 1'' graph background Dowel and wood stick size chart, ranging from 1/16 to 5/8''. One 12'' x 18'' Builder's Cutting Mat. This is a Self Healing Worktop Mat Designed to Preserve the Work Surface and save money.. fewer Broken Knife
...more about the Hobbico Builder's Cutting Mat 12x18''

Many Handy Markings Printed On The Surface, Including; Vertical Rulers, Metric and Standard Horizontal Rulers, Metric and Standard 2'' and 3'' Star Templates 30, 45, and 60 Degree Angles 1'' Graph Background Dowel and Wood Stick Size Chart, Ranging from 1/16 to 5/8'' Airplane Spec Conversion Chart (standard to metric), Including Wing Area, Wingspan, Weight, Wing Loading, Fuselage Length, Engine Sizes, Bolt, Screw, Drill and Tap Size Information Table. One 18'' x 24''
...more about the Hobbico Builder's Cutting Mat 18x24''

Many Handy Markings Printed On The Surface, Including; Vertical Rulers, Metric and Standard Horizontal Rulers, Metric and Standard 2'' and 3'' Star Templates 30, 45, and 60 Degree Angles 1'' Graph Background Dowel and Wood Stick Size Chart, Ranging from 1/16 to 5/8'' Airplane Spec Conversion Chart (standard to metric), Including Wing Area, Wingspan, Weight, Wing Loading, Fuselage Length, Engine Sizes, Bolt, Screw, Drill and Tap Size Information Table. Measurement Chart to
...more about the Hobbico Builder's Cutting Mat 24x36''

Three layer design features a harder outer layer on the top & bottom of the mat with a softer center layer Perfect for cutting parts off of trees, cutting decals or any cutting with a hobby kife that would damage your table Metric rulers printe the face make it easy to measure parts you are cutting. One Cutting Mat. This is the Tamiya Cutting Mat A3
...more about the Tamiya Cutting Mat A3 Size

.. This 8.5'' x 12'' Self Healing Mat is grey in color. The special surface and core work together to lesson the effects of cutting with sharp blades. There is a 1'' grid pattern to aid in accurate cutting. The mat also has a non-slip
...more about the X-acto Self-Healing Mat 8.5x12''