|
|
Plastic Models → Building Supplies → Boxes
|
Clear Durable Boxes that Allow Fast Location of Parts. Dividers are Molded in to Prevent Small Parts From Sliding Between Sections. Two Locking Tabs to Hold the Lid Tight. Wormproof (per manufacturer). Resists Common Chemicals. One Parts Box with 3 fixed dividers. Twenty Dividers. Hobbico Parts Boxes are an Inexpensive Way to Keep Your Small Parts like washers, bearings, bushings and so on, neatly organized and always handy. This item has a 90 day
...more about the Hobbico Parts Box 14x9x2'' w/Adj Compartments
|
|
|
Plastic Models → Building Supplies → Cutting Mat
|
Builder's Mat. Durable three layer construction provides a firm base for any cutting job. Green non-reflective self healing surface. Many handy markings printed on the surface, including. Horizontal rulers, metric and standard. 2'' star template. 3 0 45 and 60 angles. 1'' graph background. Modeling Knife. Constructed of aluminum with 4-jaw chuck to insure blade lock and plastic safety cap to cover blade when not in use. Serrated section near blade and at center of handle
...more about the Hobbico Builder's Cutting Mat 9x12'' w/Hobby Knife
|
Durable three layer construction provides a firm base for any cutting job. Green non-reflective surface. Many handy markings printed on the surface, including. Horizontal rulers, metric and standard. 2'' star template. 30 45 and 60 angles. 1'' g raph background. One Hobbico 9''x12'' (228mm x 305mm) Builder's Cutting Mat. This is the Hobbico 9''x12'' (228mm x 305mm) Builder's Cutting
...more about the Hobbico Builder's Cutting Mat 9x12''
|
Many Handy Markings Printed on the Surface, Including; Vertical rulers, metric and standard Horizontal rulers, metric and standard 2'' and 3'' star templates 30, 45, and 60 degree angles 1'' graph background Dowel and wood stick size chart, ranging from 1/16 to 5/8''. One 12'' x 18'' Builder's Cutting Mat. This is a Self Healing Worktop Mat Designed to Preserve the Work Surface and save money.. fewer Broken Knife
...more about the Hobbico Builder's Cutting Mat 12x18''
|
Many Handy Markings Printed On The Surface, Including; Vertical Rulers, Metric and Standard Horizontal Rulers, Metric and Standard 2'' and 3'' Star Templates 30, 45, and 60 Degree Angles 1'' Graph Background Dowel and Wood Stick Size Chart, Ranging from 1/16 to 5/8'' Airplane Spec Conversion Chart (standard to metric), Including Wing Area, Wingspan, Weight, Wing Loading, Fuselage Length, Engine Sizes, Bolt, Screw, Drill and Tap Size Information Table. One 18'' x 24''
...more about the Hobbico Builder's Cutting Mat 18x24''
|
Many Handy Markings Printed On The Surface, Including; Vertical Rulers, Metric and Standard Horizontal Rulers, Metric and Standard 2'' and 3'' Star Templates 30, 45, and 60 Degree Angles 1'' Graph Background Dowel and Wood Stick Size Chart, Ranging from 1/16 to 5/8'' Airplane Spec Conversion Chart (standard to metric), Including Wing Area, Wingspan, Weight, Wing Loading, Fuselage Length, Engine Sizes, Bolt, Screw, Drill and Tap Size Information Table. Measurement Chart to
...more about the Hobbico Builder's Cutting Mat 24x36''
|
|
|
Plastic Models → Building Supplies → Organizers
|
Made of a Grey Plastic Material. Keeps 1/8'' Shaft (bits) Organized and Easy to Find. 40 Holes with 5 Rows of 8. Compact size 2-3/4''L x 4-1/4''W x 3/4''Thick. There is about 1/2'' Between the Centers of Each Hole. One Tool Bit Caddy. This is the H obbico Tool Bit Caddy for 1/8'' Bits
...more about the Hobbico Tool Bit Caddy 1/8'' Bits
|
|
|
Plastic Models → Building Supplies → Scissors / Shears
|
Great for Cutting Electric Wires, Photo Etched Metal & Small Diameter Soft Metals up to 0. 04'' (1mm) Diameter, Plastic Model Sprue Trees and much more. 5'' Long with Ultra Slim Design and 7/16'' Long Stainless Steel Blades. Spring Loaded to Re n After Each Cut. Soft Coated Blue Handle for a Comfortable Grip. One Diagonal Cutter (Shear). This is the Hobbico High Precision Diagonal Cutter
...more about the Hobbico High Precision Diagonal Sprue Cutter 5''
|
One end is a traditional wire cutter, the opposite end is a spring action in-handle wire stripper. For use on soft copper (electronic) wire. Stripper self-adjusts to 26 AWG - 14 AWG wire sizes-no stripping holes to locate. Holds and strips wire in one quick motion. Cutting head is full-flush cutting and low-profile with stainless steel induction hardened jaws. One Hobbico 2-In-1 Wire Cutter and Stripper. This is the Hobbico 2-In-1 Wire Cutter and
...more about the Hobbico 2-In-1 Wire Cutter/Stripper Small
|
One end is a traditional wire cutter, the opposite end is a spring action in-handle wire stripper For use on soft copper (electronic) wire Stripper self-adjusts to 14 AWG - 10 AWG wire sizes-no stripping holes to locate Holds and strips wire in one quick motion Cutting head is a full-flush cutting and low-profile design with stainless steel induction hardened jaws. One large Hobbico 2-In-1 Wire Cutter and Stripper. This is the large Hobbico 2-In-1 Wire Cutter and
...more about the Hobbico 2-In-1 Wire Cutter/Stripper Large
|
Curved tip specially designed to cut butyrate canopies used on radio controlled airplanes. These can also be used for Lexan plastic car bodies, helicopter windshields and other plastics. Black plastic handle for comfort and control. Stainless steel cutting blades. One pair of Canopy Scissors. This is the Hobbico Curved Tip, Plastic Canopy
...more about the Hobbico Curved Tip Canopy Scissors 5-1/2''
|
|
Plastic Models → Building Supplies → Miscellaneous
|
Constructed of sturdy aluminum. Makes precise 45 and 90 degree cuts up to 7/8'' (22mm) deep. Ideal for precision cuts in wood, plastic, and soft metal. Fine toothed razor saw blade makes cuts 1-1/4'' (32mm) deep with 54 teeth per inch (21 teeth per centimeter). Holds materials 1/16'' - 1-1/4'' (1.6mm-32mm). Front of box has lip to hold steady on edge of table while cutting. One aluminum mitre box. One multi-purpose handle. One 54 tooth razor saw blade. This is the Aluminum
...more about the Hobbico Mitre Box Set w/Handle & Blade
|
Constructed of sturdy aluminum. Makes precise 45 and 90 degree cuts up to 7/8'' (22mm) deep. Holds materials 1/16'' - 1-1/4'' (1.6mm-32mm). Front of box has lip to hold steady on edge of table while cutting. One Aluminum Mitre Box. This is the Alum inum Mitre Box used for razor saws from
...more about the Hobbico Aluminum Mitre Box
|
Constructed of steel. Ideal for precision cuts in wood, plastic and soft metal. Two fine toothed razor saw blades makes cuts 1-1/4'' (32mm) deep with 54 teeth per inch (21 teeth per centimeter) and 1'' (26mm) deep with 42 teeth per inch (16 teeth p er centimeter). One Multi-Purpose Knife Handle with plastic grip. One 1-1/4'' (32mm) 54 teeth per inch (21 teeth per centimeter blade. One 1'' (26mm) 42 teeth per inch (16 teeth per centimeter) blade. This is the Hobbico Razor Saw
...more about the Hobbico Razor Saw Set w/Handle & Blade
|
|
