OFNA-Racing Plastic Models

Specially designed screwdriver for fine adjustment of carburetor screws CNC machined handle, black in color with rubber engine stop on opposite end Steel blade adjusts for close or long reach. JLR Ofna Tuning Driver and Engine Stop. This is the JLR Ofna Tuning Driver and Engine
...more about the OFNA Racing Tune Stop Adjustable Driver

Handle is a hard impact resistant plastic with a ratchet type action. Ratcheting handle can be locked into the tighten, or loosen position. The included tips are made from long life hardened metal. One ratcheting handle. One 1.5mm tip. One 2.0mm ti p. One 2.5mm tip. One 3.0mm tip. One flexible plastic bit holder. This Set of Hex Wrenches from OFNA Key Into An Easy-To-Grip Ratching Handle Making Them Much Easier To Use Than The Standard ''L'' Type Allen
...more about the OFNA Racing Hex Wrench Driver Kit

Steel construction Ratchet action handle. One each 1/8, 1/12, 1/32 1/64'' wrench with handle and plastic wrench. holder. This is the Standard Four Piece Hex Wrench Set with Handle from
...more about the OFNA Racing Hex Ball Wrench Tool Set US

Metal construction Fits most metric nuts, including wheel nuts and glow plugs 8mm socket includes spring clip for holding glow plugs Special 10mm socket for pilot shafts Handy storage for up to four glow plugs Reduces clutter and weight in your fie ld bag or tool box. One Cross Wrench. This is the Ofna Cross Car
...more about the OFNA Racing Cross Wrench w/17mm Ofna Label

Aluminum construction. (1) 3-way wrench. This is a 3-way wrench by
...more about the OFNA Racing Y Cross Wrench 5.5, 7, 8mm

Used on 17mm wheel nuts. Brass construction. Includes a small metal breaker bar. One Monster Wheels Hex Wrench. This is a Monster Wheels Hex Wrench from
...more about the OFNA Racing Hex Wrench Monster Wheels

Steel construction Black in color Features an 8 and 10mm sockets and a 5mm hex driver. One SNR Cross wrench. This is the Ofna Racing SNR Cross Wrench with 10 and 8mm sockets and a 5mm hex
...more about the OFNA Racing SNR Cross Wrench 10, 5, 8mm

Anodized Tool Set, 4 Pcs Hex Wrench - Long Bit Rotating plastic cap on the end of the handle spins in your palm for easier wrench turns. 1.5, 2.0, 2.5, 3.0mm W/Colored Handles. This is the OFNA 4 Piece Hex Wrench
...more about the OFNA Racing Hex Wrench Set MM Long 4pcs

Lifetime tip replacement guarantee. Anodized aluminum color coded handles. Grooved handle for a more secure grip. Extra long 3-1/2'' shanks with hardend steel tips. One 1.5mm Purple handle wrench. One 2mm Green wrench. One 2.5mm Blue handle wrench. One 3mm Black handle wrench. This is the Ofna Racing 4 Piece Hex Wrench Set with Metric Sized
...more about the OFNA Racing 4pc Hex Wrench Set 1.5,2,2.5,3.0mm

Lifetime tip replacement guarantee. Anodized aluminum color coded handles. Grooved handle for a more secure grip. Extra long 3-1/2'' shanks with hardend steel tips. One.050'' Gold handle wrench. One 1/16'' Aluminum (not anodized) wrench. One 5/64'' Red handle wrench. One 3/32'' Purple handle wrench. This is the Ofna Racing 4 Piece Hex Wrench Set with Standard Sized
...more about the OFNA Racing 4pc Hex Wrench Set .05,1/16,5/64,3/32''

1.5mm hex wrench. Pink-anodized aluminum handle. Removable tip has lifetime warranty. One 1.5mm Hex Wrench with Handle. This is a 1.5mm Hex Wrench with Handle from
...more about the OFNA Racing Hex Wrench w/Handle 1.5mm

2.0mm hex wrench. Green-anodized aluminum handle. Removable tip has lifetime warranty. One 2.0mm Hex Wrench with Handle. This is a 2.0mm Hex Wrench with Handle from
...more about the OFNA Racing Hex Wrench w/Handle 2.0mm

2.5mm hex wrench. Blue-anodized aluminum handle. Removable tip has lifetime warranty. One 2.5mm Hex Wrench with Handle. This is a 2.5mm Hex Wrench with Handle from
...more about the OFNA Racing Hex Wrench w/Handle 2.5mm

3.0mm hex wrench. Black-anodized aluminum handle. Removable tip has lifetime warranty. One 3.0mm Hex Wrench with Handle. This is a 3.0mm Hex Wrench with Handle from
...more about the OFNA Racing Hex Wrench w/Handle 3.0mm

1/16'' hex wrench. Silver aluminum handle. Removable tip has lifetime warranty. One 1/16'' Hex Wrench with Handle. This is a 1/16'' Hex Wrench with Handle from
...more about the OFNA Racing Hex Wrench w/Handle 1/16''

Red aluminum handle with blue rubber grip Steel tool shafts have 1/4'' size hexes that key into the handle Foam lined, clear plastic storage case to keep parts organized Stamped size information in each tool shaft for easy identification. One 3.75' ' (95mm) long Handle with rubber grip. One.18'' (4.5mm) Wide Flat Head Screwdriver Shaft. One #2 Phillips Head Screwdriver Shaft. One 1.5mm Hex Wrench Shaft. One 2mm Hex Wrench Shaft. One 2.5mm Hex Wrench Shaft. One 3mm Hex Wrench
...more about the OFNA Racing Tool Set 1/4 Drive w/Handle (9)

The included tips are made from long life hardended metal. One #2 Phillips screwdriver tip. One 1.5mm tip. One 2.0mm tip. One 2.5mm tip. One 3.0mm tip. One 4.5mm flat blade screwdriver tip. One 4.5mm socket tip. One 5.5mm socket tip. One 7.0mm sock et tip. One flexible bit holder - holds 7 of the 9 tips. This Set of Hex Wrenches from OFNA Key Into An Easy-To-Grip Ratching Handle that is NOT included, or can be turned by a 1/4''
...more about the OFNA Racing Hex Wrench Set 1/4 Drive 1

Anodized Tool Set, 4 Pcs Hex Ball Wrenches Rotating plastic cap on the end of the handle spins in your palm for easier wrench turns Handles black anodized. 1.5, 2.0, 2.5, 3.0mm Hex Ball Wrenches. This is the OFNA 4 Piece Hex Ball Wrench
...more about the OFNA Racing Hex Ball Wrench 1.5-3mm Blk

This specialty tool makes working on your Nitro powered R/C vehicles a lot easier!. Four different sizes of hex wrenches in one. Durable steel construction. One Cross Wrench. Reduce Clutter with this 4-in-1 Cross Wrench from
...more about the OFNA Racing Cross Wrench

Steel construction. One each 1.5, 2.0, 2.5, 3.0mm wrenches. Plastic case and removable plastic holder. This is the 1/4 Drive Four Piece Hex Wrench Set with Case from
...more about the OFNA Racing PCR 1/4 Drive 4 Hex Wrench Case

Steel construction 1/4'' hex size keys into a racheting handle (not included) or 1/4'' socket. One 4mm Diameter Phillips Screwdriver Tip - 4'' (103mm) long. One 3mm Diameter Phillips Screwdriver Tip - 3.6'' (91mm) long. One 2mm Diameter Phillips Sc rewdriver Tip - 3'' (77mm) long. One Black Plastic Tip Holder. One Foam Lined Black Plastic Storage Case with Clear Plastic Lid. This Set of Phillips Screw Drivers from OFNA key into an easy-to-grip ratcheting handle that is NOT
...more about the OFNA Racing PCR 1/4 Drive Philips

Aluminum construction Silver in color. One Aluminum Jig. One Wrench. One Securing Pin Screw. One Securing Pin. One 3x3mm Set Screw. Two 3x15mm Socket Head Cap Screws. This is the Ofna Centax Clutch Tool Kit. Allows for Quick and Easy Way to Assembl e a Centax
...more about the OFNA Racing SNR Centax Clutch Tool Kit

The included tips are made from long life hardended metal. One 1.5mm hex driver bit. One 2mm hex driver bit. One 2.5mm hex driver bit. One 3mm hex driver bit. This is the Metric Hex Drivers Set from Ofna. Set Does NOT Include the 1/4'' Ratched
...more about the OFNA Racing Set Hex Drivers Metric No Handle

The included tips are made from long life hardended metal. One 3/32'' hex driver bit. One 5/64'' hex driver bit. One 1/16'' hex driver bit. One.050'' hex driver bit. This is the Standard Hex Drivers Set from Ofna. Set Does NOT Include the 1/4'' Rat ched
...more about the OFNA Racing Set Hex Driver U.S. No Handle

Curved tip specially designed to cut polycarbonate bodies used on radio controlled vehicles. These can also be used for airplane canopies, helicopter windshields and other plastics. Black plastic handle for comfort and control Stainless steel cutti ng blades. One pair of Body Scissors. This is the Ofna Curved Tip, Lexan Plastic Body
...more about the OFNA Racing Scissor Curved Lexan Cutter

Use on 2, 3 or 4 pin flywheels. Made of thick gauge polished steel. 17mm wheel nut wrench on one end. A must have tool for your box. Lifetime warranty. Carded packaging. One Flywheel Wrench. This is a Flywheel Wrench from Ofna. For 1/8 scale Nitro buggies use the 17mm wheel nut wrench. This has the Flywheel wrench on one end and the wheel nut wrench on the
...more about the OFNA Racing Flywheel Wrench

CNC aluminum anodized black construction Reams hole sizes from 3mm-14mm Self starting point Super Sharp blade for making clean holes in bodies and rear wings Silver CNC aluminum cap protects reamer blade when not in use. One Aluminum body reamer wi th cap. This is the Black Knife Edge Body Reamer by
...more about the OFNA Racing Knife Edge Reamer Black

CNC Aluminum Anodized Blue construction. Cool looking. Hole sizes 3mm-14mm. Clean holes for mountign bodies and rear wings. One Aluminum body reamer. This is the Blue Knife Edge Body Reamer by
...more about the OFNA Racing Knife Edge Reamer Blue