Tamiya Plastic Models

Used for holding tiny drill bits, taps, reamers, cutters/routers, pins, scribing/etching needles, wire, screws, wooden polishing. sticks, etc. Will hold 0.1mm to 3.2mm diameter objects. Carded packaging. One Fine Pin Vise D. This is a Fine Pin Vise D from
...more about the Tamiya Fine Pin Vise D

Used for holding tiny drill bits, taps, reamers, cutters/routers, pins, scribing/etching needles, wire, screws, wooden polishing. sticks, etc. Will hold 0.1mm to 1.0mm diameter objects. Carded packaging. One Fine Pin Vise S. This is a Fine Pin Vise S from
...more about the Tamiya Fine Pin Vise S

Three layer design features a harder outer layer on the top & bottom of the mat with a softer center layer Perfect for cutting parts off of trees, cutting decals or any cutting with a hobby kife that would damage your table Metric rulers printe the face make it easy to measure parts you are cutting. One Cutting Mat. This is the Tamiya Cutting Mat A3
...more about the Tamiya Cutting Mat A3 Size

Black plastic handles. Black steel blades. One pair of Hobby Scissors. These are 4-1/2'' Decal Scissors from
...more about the Tamiya Decal Scissors 4-1/2''

Can be used for a variety of uses Steel construction Small size 1mm blades Cap included to protect blades. One pair of modeling scissors. This is a pair of Modeling Scissors from Tamiya for photo etched
...more about the Tamiya Modeling Scissors For Photo Etched Parts

Curved tip specially designed to cut polycarbonate bodies used on radio controlled vehicles. These can also be used for airplane. canopies, helicopter windshields and other plastics. Black plastic handle for comfort and control. Stainless steel cut ting blades. One pair of Body Scissors. This is the Tamiya Curved Tip, Lexan Plastic Body
...more about the Tamiya Curved Scissors 5-1/2''

Black rubber grip. Blue molded plastic handle and head. Replacement tips. One hammer w/four replacement tips; Iron (convex), Iron (flat), Nylon, & Brass. One case for replacement tips. This is a Micro Hammer from
...more about the Tamiya Micro Hammer

This is a precision side cutter for removing parts from a plastic sprue without damaging the parts. Developed exclusively for plastic modeling. Impact resistant chrome vanadic alloy material for long life. High quality vinyl covering assures good g rip. Carded packaging. One Side Cutter for Plastic. This is a Side Cutter for Plastic from
...more about the Tamiya Side Cutter Plastic

This tool for 2mm E-rings is extremely useful during contruction and maintenance of R/C models. The unique shape of the specially designed tip makes it easy to connect and remove the tiny E-rings. Carded packaging. One 2mm E-Ring Tool. This is a 2m m E-Ring Tool from
...more about the Tamiya E-Ring Tool 2mm

This precision side cutter has thin, pointed blades, and is ideal for removing delicate plastic parts from the sprue. The blades are made from quality chrome-vanadic alloy, and are hand-finished for the utmost sharpness. Carded packaging. One Sharp Pointed Side Cutter. This is a Sharp Pointed Side Cutter from
...more about the Tamiya Sharp Pointed Side Cutter

This precision side cutter is ideal for removing delicate plastic parts from the sprue. The blades are made from quality chrome-vanadic alloy, and are hand-finished for the utmost sharpness. Grips are covered with soft plastic. Carded packaging. On e Modeler's Side Cutter. This is a Modeler's Side Cutter from
...more about the Tamiya Modeler's Side Cutter