Plastic Models

Multiple-section, finger-jointed wood construction resists warping, so modelers can build with greater confidence. Fine wood grain surface and uniform density accepts T-pins easily. Parts are T-pinned in place over the plans on top of the board, so the airplane structure can be built and then glued once the parts are in position. This board is designed for small projects. One Small size 12x24x3/4 Pro Building Board. This is a Small size 12x24x3/4 Pro Building Board from .....
...more about the Great Planes Pro Building Board 12x24x3/4''

Two aluminum end plates. Two large plywood hold down pieces. Two small plywood hold down pieces. Two 1/4'' wing jig rods. Two wing nuts. Four #8 x 1/2'' wood screws. Two 6-32 bolts. One 1/2'' wood center brace. Two 1/2'' wood base pieces. One instruction booklet. The Wing Jig holds wing ribs in perfect alignment during construction. It will accomodate a 34'' panel to build up to a 68'' tapered wing. Constant chord wings can be built to any size. All hardware is included. .....
...more about the Great Planes Wing Jig Kit

Multiple-section, finger-jointed wood construction resists warping, so modelers can build with greater confidence. Fine wood grain surface and uniform density accepts T-pins easily. Parts are T-pinned in place over the plans on top of the board, so the airplane structure can be built and then glued once the parts are in position. This board is designed for planes up to. 40 size models. One Medium size 16x36x3/4'' Pro Building Board. This is a Medium size 16x36x3/4'' Pro .....
...more about the Great Planes Pro Building Board 16x36x3/4''

Multiple-section, finger-jointed wood construction resists warping, so modelers can build with greater confidence. Fine wood grain surface and uniform density accepts T-pins easily. Parts are T-pinned in place over the plans on top of the board, so the airplane structure can be built and then glued once the parts are in position. This board is designed for large assembly projects. One Large size 16x48x3/4'' Pro Building Board. This is a Large size 16x48x3/4'' Pro Building .....
...more about the Great Planes Composite Building Board 16x48x3/4''

Direct Replacement Part. Used For Holding Down All Of The Different Accessories To The Building Board. Ten Magnets. Twenty Steel Plates. These Magnets Are Used With The Magic Magnet Building Board .....
...more about the Great Planes Magic Magnets

This 90 degree alignment jig makes model building easy. Slotted for 1/16'', 3/32'' and 1/8'' thick wing ribs. For use on bulkheads, horizontal and vertical tail and fuselage sides. Can also be used as a thickness gauge. Orange plastic construction. One Up-Right 90 Degree Alignment Jig. This is the Up-Right 90 Degree Alignment Jig from House of .....
...more about the House of Balsa Upright 90 Degree Alignment Jig