|
|
|
A new concept in sanding!..Use wet or dry!. Tough, durable abrasive coated polyester..''The toughest, most flexible 'sandpaper' made today!''. Won't crack, peel, clog, scratch or break down. Reusable. Flex-I-Grit outlasts ordinary sandpaper. Flex-I-Grit is perfect for for smoothing down cured polymer clays without leaving deep scores or changing the shape of the sculpture. Used by modelers to sand and polish molded plastic kits. Works on acrylic and enamel paints. Assorted
.....
...more about the K & S Flex-I-Grit Regular Asst (36)
|
A new concept in sanding!..Use wet or dry!. Tough, durable abrasive coated polyester..''The toughest, most flexible 'sandpaper' made today!''. Won't crack, peel, clog, scratch or break down. Reusable. Flex-I-Grit outlasts ordinary sandpaper. Flex-I-Grit is perfect for for smoothing down cured polymer clays without leaving deep scores or changing the shape of the sculpture. Used by modelers to sand and polish molded plastic kits. It has the perfectly fine grits to polish out
.....
...more about the K & S Flex-I-Grit Micro Fine Sanding Film Asst (36)
|
|
|
The choice of professionals for wet sanding between coats of varnish, laquer, paint, and other finishes. For use on paint and varnish. 600 grit. Waterproof, flexible ''A'' weight backing for wet or dry finishing of plastic, fiberglass and top coats. Made with silicon carbide, a sharp synthetic mineral that cuts fast and smooth, it can also be used to repair surface defects. Can be used with water or cutting oil to reduce clogging and extend abrasive life. 25 Wetordry
.....
...more about the 3M Wet or Dry 9x11'' 600A (25)
|
The choice of professionals for wet sanding between coats of varnish, laquer, paint, and other finishes. For use on paint and varnish. 400 grit. Waterproof, flexible ''A'' weight backing for wet or dry finishing of plastic, fiberglass and top coats. Made with silicon carbide, a sharp synthetic mineral that cuts fast and smooth, it can also be used to repair surface defects. Can be used with water or cutting oil to reduce clogging and extend abrasive life. 25 Wetordry
.....
...more about the 3M Wet or Dry 9X11'' 400A (25)
|
The choice of professionals for wet sanding between coats of varnish, laquer, paint, and other finishes. For use on paint and varnish. 320 grit. Waterproof, flexible ''A'' weight backing for wet or dry finishing of plastic, fiberglass and top coats. Made with silicon carbide, a sharp synthetic mineral that cuts fast and smooth, it can also be used to repair surface defects. Can be used with water or cutting oil to reduce clogging and extend abrasive life. 25 Wetordry
.....
...more about the 3M Wet or Dry 9x11'' 320A (25)
|
The choice of professionals for wet sanding between coats of varnish, laquer, paint, and other finishes. For use on paint and varnish. 220 grit. Waterproof, flexible ''A'' weight backing for wet or dry finishing of plastic, fiberglass and top coats. Made with silicon carbide, a sharp synthetic mineral that cuts fast and smooth, it can also be used to repair surface defects. Can be used with water or cutting oil to reduce clogging and extend abrasive life. 25 Wetordry
.....
...more about the 3M Wet or Dry 9x11'' 220A (25)
|
Coarse grit for basic shaping. Resembles a fingernail file. Can be used wet or dry. Can be cut and shaped to fit specific areas as needed to achieve the finest finish possible. Carded packaging. One Coarse Grit Sanding Stick. This is a Coarse GritSanding Stick from Squadron
.....
...more about the Squadron/Signal Sanding Stick Coarse Grit
|
Medium grit for final shaping. Resembles a fingernail file. Can be used wet or dry. Can be cut and shaped to fit specific areas as needed to achieve the finest finish possible. Carded packaging. One Medium Grit Sanding Stick. This is a Medium GritSanding Stick from Squadron
.....
...more about the Squadron/Signal Sanding Stick Medium Grit
|
Fine grit for smoothing. Resembles a fingernail file. Can be used wet or dry. Can be cut and shaped to fit specific areas as needed to achieve the finest finish possible. Carded packaging. One Fine Grit Sanding Stick. This is a Fine Grit Sanding Stick from Squadron
.....
...more about the Squadron/Signal Sanding Stick Fine Grit
|
Extra fine grit for buffing. Resembles a fingernail file. Can be used wet or dry. Can be cut and shaped to fit specific areas as needed to achieve the finest finish possible. Carded packaging. One Extra Fine Grit Sanding Stick. This is an Extra Fine Grit Sanding Stick from Squadron
.....
...more about the Squadron/Signal Sanding Stick Extra Fine Grit
|
Three grits for shaping, buffing and polishing. Resembles a fingernail file. Can be used wet or dry. Can be cut and shaped to fit specific areas as needed to achieve the finest finish possible. Carded packaging. One Tri-Grit Sanding Stick. This isa Tri-Grit Sanding Stick from Squadron
.....
...more about the Squadron/Signal Sanding Stick Tri-Grit
|
Sanding sticks resemble fingernail files. Contains one each of coarse, medium, fine, extra fine and tri-grit sanding sticks. May be used wet or dry. Can be cut and shaped to fit specific areas as needed to achieve the finest finish possible. Carded packaging. One Sanding Stick Set. This is a Sanding Stick Set from Squadron
.....
...more about the Squadron/Signal Sanding Stick Set
|
Extra super fine grit for polishing. Resembles a fingernail file. Can be used wet or dry. Can be cut and shaped to fit specific areas as needed to achieve the finest finish possible. Carded packaging. One Extra Super Fine Grit Sanding Stick. This is an Extra Super Fine Grit Sanding Stick from Squadron
.....
...more about the Squadron/Signal Sanding Stick Extra Super Fine Grit
|
A proper foundation for painting is the most important part in finishing a model!. This finishing abrasive is clog resistant type. Three different grits. Gray colored on paper backing. Cut to desired size. Five Finishing Abrasive Sheets. This is aTamiya Finishing Abrasives Set
.....
...more about the Tamiya Finishing Abrasives Fine
|
A proper foundation for painting is the most important part in finishing a model!. This finishing abrasive is clog resistant type. Three different grits. Gray colored on paper backing. Cut to desired size. Five Finishing Abrasive Sheets. This is aTamiya Finishing Abrasives Set (Ultra
.....
...more about the Tamiya Finishing Abrasives Asst (5)
|
A proper foundation for painting is the most important part in finishing a model!. Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P400 Sheets. These are 3 Tamiya Finishing Abrasive P400
.....
...more about the Tamiya Finishing Abrasives P400 (3)
|
A proper foundation for painting is the most important part in finishing a model!. Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P600 Sheets. These are 3 Tamiya Finishing Abrasive P600
.....
...more about the Tamiya Finishing Abrasives P600 (3)
|
A proper foundation for painting is the most important part in finishing a model!. Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P800 Sheets. These are 3 Tamiya Finishing Abrasive P800
.....
...more about the Tamiya Finishing Abrasives P800 (3)
|
Provides a proper foundation for painting. P1000 is a fine finishing abrasive (similar to fine sandpaper). Includes three sheets of finishing abrasive. Three Sheets of P1000 Finishing Abrasive. This is a package of Three Pieces of P1000 Finishing Abrasive from
.....
...more about the Tamiya Finishing Abrasives P1000 (3)
|
A proper foundation for painting is the most important part in finishing a model!. Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P1200 Sheets. These are 3 Tamiya Finishing Abrasive P1200
.....
...more about the Tamiya Finishing Abrasives P1200 (3)
|
A proper foundation for painting is the most important part in finishing a model!. Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P1500 Sheets. These are 3 Tamiya Finishing Abrasive P1500
.....
...more about the Tamiya Finishing Abrasives P1500 (3)
|
A proper foundation for painting is the most important part in finishing a model!. Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P2000 Sheets. These are 3 Tamiya Finishing Abrasive P2000
.....
...more about the Tamiya Finishing Abrasives P2000 (3)
|
A proper foundation for painting is the most important part in finishing a model! Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P180 Sheets. These are 3 Tamiya Finishing Abrasive P180
.....
...more about the Tamiya Finishing Abrasive P180 (3)
|
A proper foundation for painting is the most important part in finishing a model! Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P240 Sheets. These are 3 Tamiya Finishing Abrasive P240
.....
...more about the Tamiya Finishing Abrasive P240 (3)
|
A proper foundation for painting is the most important part in finishing a model! Gray colored on paper backing. Cut to desired size. Three Finishing Abrasive P320 Sheets. These are 3 Tamiya Finishing Abrasive P320
.....
...more about the Tamiya Finishing Abrasive P320 (3)
|
Sandpaper by Testors
|
| $2.79 $2.09 (25% off) |
Product Number tes8802 |
Availability In Stock |
When clogged (clean by gripping the edges and giving it a firm snap). Sanding film can be washed in soap and water. Film flexes or folds to any curved surface. Film may be wrapped around any shape sanding block for precise detailing. ALL grades may be used wet or dry. One Header Card Package with Five Hobby Sanding Films. One #150 Grit Coarse Black. One #280 Grit Medium Light Orange. One #320 Grit Fine Dark Gray. One #400 Grit Extra Fine Light Tan. One #600 Grit Ultra Fine
.....
...more about the Testors Sandpaper
|
FEATURES; When clogged (clean by gripping the edges and giving it a firm snap) Sanding film can be washed in soap and water Film flexes or folds to any curved surface Film may be wrapped around any shape sanding block for precise detailing ALL grades may be used wet or dry. Ten Hobby Sanding Films. Two #150 Grit Coarse Black. Two #280 Grit Medium Light Orange. Two #320 Grit Fine Dark Gray. Two #400 Grit Extra Fine Light Tan. Two #600 Grit Ultra Fine Tan. This patented,
.....
...more about the Testors Hobby Sanding Film (10)
|