Plastic Models

The dynamically balanced, compact and streamlined design of the Gyros Mini Chuck allows it to spin true and vibration-free even at. 30,000 rpm. The shank and collet are precision machined from a single steel billet, thus ensuring optimum concentric ity and balance. The chuck has a collet capacity of 0''-.0390'' (sizes #61-#80). This makes the task of centering these tiny drill bits in a hand or. electric drill simple and easy. The integral collet design allows your drill bit
...more about the Gyros Products Co Mini Chuck w/1/8'' Shank

One Pin Vise (pocket drill) w/pocket clip. One #52 pin vise drill bit.(nearly 1/16''). One #56 pin vise drill bit. One #60 pin vise drill bit. One #64 pin vise drill bit. One #70 pin vise drill bit. One #80 pin vise drill bit. This is a PIN VISE (P ocket Drill) w/1/16'' Collet and Six Bits that conveniently are stored in the knurled handle with shirt pocket
...more about the Hobbico Pin Vise 1/16'' Collet w/6 Bits

Steel construction (natural metal color). Retainer clip for holding onto pockets. Adjustable collets to hold many bits, numbers 30-51. One Pin Vise (hand held drill). Three Bits (#48, #51, #53). This is a Small Hand Held Manual Drill that Resembles a Pen with a Collet for Drill Bits in One End, and a Removable Cap to Hold Drill Bits in the
...more about the Hobbico Pin Vise 1/8'' Collet w/3 Bits

Great for making holes in airplane servo horns. Makes non-tapered holes for a perfect fit. 2-3/4'' total length with knurled aluminum handle. Small size great for tight spaces. One Servo Horn Drill. This is the Hobbico Servo Horn (Arm)
...more about the Hobbico Servo Horn Drill

Five different drills - 1/16'', 5/64'', 3/32'', 1/8'' and 3/16'' - with bit sizes stamped on the end of the color-coded handles. Anodized handles are knurdled for a sure, comfortable grip. Set comes with a handy clear plastic carrying pouch also ha ving the bit sizes labled on each drill slot. Fits easily into a tool box or flight box. One 1/16'' Quick Drill. One 5/64'' Quick Drill. One 3/32'' Quick Drill. One 1/8'' Quick Drill. One 3/16'' Quick Drill. One Clear Plastic
...more about the Hobbico Quick Drill Set w/Pouch

Extended drill bits have a normal high speed drill bit set into a steel rod that is slightly larger in diameter than the drill bit. Reaches up to 14'' into your model. Great for putting in a forgotten hole. Drills holes for 8-32 screw applications. One 3/16'' Extended Drill Bit. This is a 3/16'' Extended Drill Bit from
...more about the Harry B. Higley Extended Drill 3/16''

Extended drill bits have a normal high speed drill bit set into a steel rod that is slightly larger in diameter than the drill bit. Reaches up to 14'' into your model. Great for putting in a forgotten hole. Drills holes for 6-32 screw applications. One 5/32'' Extended Drill Bit. This is a 5/32'' Extended Drill Bit from
...more about the Harry B. Higley Extended Drill 5/32''

Silver metal hammer. Black plastic handle. Carded packaging. One Modeler's Tap Hammer. This is a Modeler's Tap Hammer from
...more about the Latina Modeller's Tap Hammer

Used for model railroads and model ship building. Insert the nail into the nailer and push slightly onto the surface to be nailed. Nailer helps to avoid damaging delicate surfaces. Black wooden handle with a metal tip. Magnetized post. Adjustable s pring loaded shaft. Does not include nails. One Nail Nailer. This is the Nail Nailer from
...more about the Latina Nail Nailer

Constructed of steel and serrated for sure grip Threads into the Hinge Point Drill Jig to guide the drilling of mounting holes for the #317 (ROBQ0317) and #318 (ROBQ0318) Super Hinge Point Pockets. One Robart 1/4'' Drill Jig Bushing. This is the Ro bart 1/4'' Drill Jig
...more about the Robart Drill Jig Bushing

Plastic holder dispenses tiny drill bits, simply tilt to remove bit. Hole for convenient hanging on pegboard in shop area. One Squadron Tools Drill Bit Index with one each sizes 61-80 drill bits for micro-sized hobby and craft work. This is the Squ adron Tools Drill Bit Index with sizes 61-80 Drill
...more about the Squadron/Signal Drill Bit #61-80 (20)

This is a ready to assemble electric handy drill for use with plastic models and wood. Battery powered (batteries not included). Uses a trigger switch for control. 2mm drill bit and two types of chucks are included. Blue, Orange and Grey plastic pa rts are attached to sprue trees. One Electric Handy Drill Assembly Kit. This is Tamiya's Electric Handy Drill Assembly
...more about the Tamiya Electric Handy Drill

Pin Vise is nickel-plated and has two tempered-steel, reversible chucks (four opening diameters). Pin Vise can be used wherever small holes or openings are required (e.g. exhaust pipes, gun barrels, locating holes and many other. fine detailing and scratch-building operations. Chucks take all twist drill bits up to.10'' (2.5mm). Comes in a carded package. Two Chucks. Six Drills. This is a Model Master Pin Vise with Six Drill Bits from
...more about the Testors Pin Vise w/6 Drill Bits

12 Assorted drill bits which may vary in size. The X6409 Fine Carbon Twist Drill Bit Assortment is made of high quality carbon steel for precision fine point drilling for model building.
...more about the X-acto Carbon Drill 55-80 Asst (12)

20 Drill Bits and Stand. The Set includes Drill bits #61-#81. These fine point drills are used for building models. The stand has a plastic cover for easy
...more about the X-acto Drill Set w/Stand (20)

Spiral or archemedian style hand drill for use with small wire size drill bits from #80 to #70. Push ring down to turn drill. Spring return makes drilling easier and faster. Carded packaging. One Spiral Hand Drill. This is a Spiral Hand Drill from Zona Tool
...more about the Zona Tool Co. Spiral Hand Drill & Spring

Guides and drills mounting holes for hinge points. Adjustable for all control surfaces. It's made of hardened steel. Incorporates removable drill bushings. Instructions provided. One Drill Jig. Two Bushings. This Is A Hinge Point Drill Jig from
...more about the Robart (bulk of 4) Hinge Point Drill Jig