|
|
Model Rockets → Launch Equipment → Rocket Launchers
|
|
|
|
This is the Interlock Launch Controller for Model Rockets by Aerotech. Features: * Can be used with all model rockets. * Audible arming signal. * Key-Eject safety key ejection system. * 40 feet of power cord to Mantis Launch Pad. * Arming status display. * Flip-up cover with launch checklist. Cover guards controller launch button. * Igniter clip for use with Aerotech Copperhead single lead igniter. * Battery clips. * Durable black polymer case. * High visibility graphics. * Warning tone produced when launch controller i
...more about the Aerotech Interlock Controller
|
|
|
Model Rockets → Launch Equipment → Launch Pads
|
|
|
This is a standard launch pad from Estes. Sturdy, plastic tripod design with tilt adjustment (up to 30 degrees from vertical). Easy to set up and take down - no tools required! Comes complete with blast deflector plate and standoff, two piece 1/8" (3 mm) launch rod, safety cap and key. Porta-Pad II can accommodate a 3/16" (5 mm) launch rod. Features: * Sturdy, plastic tripod design with tilt adjustment up to 30 degrees from vertical. * Easy to set up and take down. * Adaptable for 3/16" (5mm) diameter launch rod (not included). * Will launch most
...more about the Estes Rockets Porta-Pad II Model Rocket Launch Pad
|
Mantis is a mid-size Model Rocket Launch Pad. Designed for all Model Rockets by AeroTech. Features: * Fully adjustable elevation and azimuth. * 2 piece threaded 4.75" x 1/4" launch rod. * Easy swing-arm loading; it can lower the launch rod to a horizontal position. * Removable aluminum legs. * Angled metal blast deflector plate. * Accepts rod sizes: 6mm, 4mm and 3mm (not included). * The loaded rocket is positioned 2 feet above the ground near mounted wire clips that hold the launch controller cord, making igniter. * hook-up convenient and comfortable. * A l
...more about the Aerotech Mantis Launch Pad
|
|
|
Model Rockets → Launch Equipment → Misc.
|
This RMS Reloadable Motor System Hardware Set Includes One of Each: RMS-18/20, RMS-24/40, RMS-29/40-120 Reloadable Motors Designed by Aerotech. Federal Law Prohibits the Sale of This Product to Persons Under Age 18. Features: * Primary use in single stage rockets. * They deliver power at the lowest per flight cost available in hobby rocketry. * RMS motors produce far less non-biodegradable waste than single-use motors. * Reflects the same reliablity, quality, and professional design. * Assembly and operation instructions provided. * Product warranty policies included.
...more about the Aerotech Reloadable Motor System 18/24/29
|
|
|
|
|
This Package Contains 1 Interlock Igniter Clip Designed for the Use With AeroTech's Copperhead Igniter for Model Rocket Engines. Features: * Uniquely designed. * Grips the igniter firmly. * Provides excellent electrical contact. * Offset and shielded contact points. * Plastic body. * Dramatically reduces the possibility of an electrical short that would prevent rocket motor ignition. * Designed so that it and the Copperhead Igniter can be used with older two-clip launch controller designs.
...more about the Aerotech Interlock Igniter Clip
|
This Model Rocket Motor Reload Kit Contains One Reloadable Motor System (RMS) 18/20 Motor Hardware Designed by Aerotech. Federal Law Prohibits the Sale of This Product to Persons Under Age 18. Features: * For use with RMS 18mm D reloads. * The RMS 18/20 motor hardware can be used with Aerotech's D13 and D24 rocket motor reloads kits. * Primary use in single stage rockets. * They deliver power at the lowest per flight cost available in hobby rocketry. * RMS motors produce far less non-biodegradable waste than single-use motors. * Reflects the same reliablity, quality, and professional design. * Parts included in this hardware kit in
...more about the Aerotech Reloadable Motor System 18/20
|
This Model Rocket Motor Reload Kit Contains One Reloadable Motor System (RMS) 24/40 Motor Hardware Designed by Aerotech. Federal Law Prohibits the Sale of This Product to Persons Under Age 18. Features: * For use with RMS 24mm D, E, F reloads. * The RMS 24/40 motor hardware can be used with Aerotech's D9, D15, E11, E18, E28, F12, F24, and F39 rocket motor reloads kits. * Primary use in single stage rockets. * They deliver power at the lowest per flight cost available in hobby rocketry. * RMS motors produce far less non-biodegradable waste than single-use motors. * Reflects the same reliablity, quality, and professional design. * As
...more about the Aerotech Reloadable Motor System 24/40
|
|
This Model Rocket Motor Reload Kit Contains One Reloadable Motor System (RMS) 29/40-120 Motor Hardware Designed by Aerotech. Federal Law Prohibits the Sale of This Product to Persons Under Age 18. Features: * For use with RMS 29mm E, F, G reloads. * The RMS 29/40-120 motor hardware can be used with Aerotech's E16, E23, F22, F40, F52, G33, G64 rocket motor reloads kits. * Primary use in single stage rockets. * They deliver power at the lowest per flight cost available in hobby rocketry. * RMS motors produce far less non-biodegradable waste than single-use motors. * Reflects the same reliablity, quality, and professional design. * A
...more about the Aerotech Reloadable Motor System 29/40-120
|
|