Crest Model Trains

Railway Express Agency Smoke Fluid may be used in any smoke unit designed for petroleum based smoke fluid. Also used to clean track. One Bottle of Smoke Fluid/Track Cleaner. Aristocraft has designed this bottle of Smoke Fluid/Track Cleaner to be used with your electric railroad track layouts. Recommended for ages 8 and over (adult supervision is .....
...more about the Crest Smoke Fluid/Track Cleaner 4 oz

10 amp capacity. Built-in cooling fan. Consistant voltage pulse width speed control. Directional control. Automatic electronic circuit protection. Power and overload indicator lights. Automatic electronic momentum circuit for smooth operation. Fixed DC taps for DC accessories. For use with any indoor-outdoor model railroads using DC track power. One DC Train Power Pack Controller. This is a DC Train Power Controller from Aristo-Craft Trains. It's for experiended collectors .....
...more about the Crest Control Pack Adapter 10 Amp

This is a two-piece wireless radio control system. Designed to operate any DC powered model train without any modification to either the existing power supplies or locomotives,. regardless of scale. Designed for easy operation. Testing has shown that a 300 foot operating range is possible between transmitter and receiver. No ''line of sight'' is necessary between the transmitter and receiver. There are 10 frequencies, as well as 10 different track addresses (channels) .....
...more about the Crest The Train Engineer Wireless Control System

This is a wireless radio control microprocessor receiver to be used together with the ART-5470 Train Engineer. You can control up to 20 switches, 10 accessories, and an on/off operation (such as lamps or sound systems). You will be able to control10 whistles or horns, and 10 bells. It has a wide voltage range of 5-16V DC, and is also designed to operate sound systems. LED power light (red) and signal light (green). You can connect a whistle/horn, bell sound function too. .....
...more about the Crest DC/RC Wireless Accy Switch

2-piece set consists of the transmitter (TX) and the receiver (RX). Allows operation of any DC powered model railroad train as a ''wireless walk-around'' control system without any modifications to. existing power supplies or locomotives. Fully compatible with any gauge and scale of DC model train. Can be used with almost any DC power pack of 2.5 amp or less. Easy installation and operation - only 4 wires need to be connected. Operational distances of ''100'' are possible .....
...more about the Crest Basic Train Engineer Wireless Walk Around

Walk around layout and control the loco, switch track, lights, sound, and operate cars up to 100 feet away Up to 100 different receivers can be controlled independently Adjustable reverse delay Direction controlled headlights Polarity protection Thermal circuit breaker Electronic reversing Frequency 75Mhz Five year warranty. Transmitter, receiver and a remote code set switch. This is the On Board Radio Controll System from .....
...more about the Crest On-Board Train Engineer 75MHz