Flashers automatically support all colors of 20ma LEDs with no additional resistors required. Colors can be mixed on the same circuit. Will drive multiple LEDs in series depending on power supply voltage. Resistors can be added to on-board solder pads for LED brghtness control. Input; 7-16V DC Less than 1'' square. LEDs sold separately. Provides flashes in short bursts similar to lights used on emergency vehicles. Multiple LEDs can be wired in
.....
...more about the Ngineering Super Flashers -- Emergency Flasher
|
|
|
|
|
Much smaller than the typical 3mm LED, this SMD device has a ceramic case with gold-plated solder pads on the back. Produces a very bright, pure white light output. Requires appropriate current limiting resistor, sold separately. Device Voltage; 3.6V DC, Current; 20 Ma, Average Life; 50-80,000
.....
...more about the Ngineering Super White LEDs 2 x 3mm -- 2-Pack
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flashers automatically support all colors of 20ma LEDs with no additional resistors required. Colors can be mixed on the same circuit. Will drive multiple LEDs in series depending on power supply voltage. Resistors can be added to on-board solder pads for LED brghtness control. Input; 7-16V DC Less than 1'' square. LEDs sold separately. Flashes like a typical stop/caution
.....
...more about the Ngineering Super Flashers -- Signal Flasher
|
Flashers automatically support all colors of 20ma LEDs with no additional resistors required. Colors can be mixed on the same circuit. Will drive multiple LEDs in series depending on power supply voltage. Resistors can be added to on-board solder pads for LED brghtness control. Input; 7-16V DC Less than 1'' square. LEDs sold separately. Alternately flashes a pair of LEDs (or up to 4 pair depending on power source). Each light is on for 3/4 second, typical of grade
.....
...more about the Ngineering Super Flashers -- Alternating Flasher
|
Flashers automatically support all colors of 20ma LEDs with no additional resistors required. Colors can be mixed on the same circuit. Will drive multiple LEDs in series depending on power supply voltage. Resistors can be added to on-board solder pads for LED brghtness control. Input; 7-16V DC Less than 1'' square. LEDs sold separately. Adjustable flash rate from 30 times per second to once every three seconds. On time and off time are equal (50% duty
.....
...more about the Ngineering Super FLashers -- Variable Rate Flasher
|
Flashers automatically support all colors of 20ma LEDs with no additional resistors required. Colors can be mixed on the same circuit. Will drive multiple LEDs in series depending on power supply voltage. Resistors can be added to on-board solder pads for LED brghtness control. Input; 7-16V DC Less than 1'' square. LEDs sold separately. Alternately flashes a pair of LEDs (or up to 4 pair depending on power source). Adjustable flash rate from 30 times per second to once
.....
...more about the Ngineering Super Flashers -- Variable Rate Alternating Flasher
|
LED Tester by Ngineering
|
| $8.95 $8.05 |
Product Number ngin8021 |
Availability Usually ships out in 3-4 Days |
Design allows any color LED to be tested. No need to worry about choosing the proper resistor for protect the LED. simply snap the tester n a 9V battery and start testing. Includes spring-loaded contact block to hold wired
.....
...more about the Ngineering LED Tester
|
Smaller than any decoder at just.31'' x.31'' x.118'' and utilizing the industry's smallest microcontroller and associated voltage control circuitry, the total module consumes less than 500 a (<1/2 ma). Typical peak operating current for these modules with LED(s) attached and running through full brightness curves range from 18-38 ma. This makes them ideally suited for operation when powered directly by a function output of any of today's HO, N or Z-scale DCC decoders.
.....
...more about the Ngineering Ultra-Miniature Lighting Effects -- Mars Light Simulator
|
Smaller than any decoder at just.31'' x.31'' x.118'' and utilizing the industry's smallest microcontroller and associated voltage control circuitry, the total module consumes less than 500 a (<1/2 ma). Typical peak operating current for these modules with LED(s) attached and running through full brightness curves range from 18-38 ma. This makes them ideally suited for operation when powered directly by a function output of any of today's HO, N or Z-scale DCC decoders.
.....
...more about the Ngineering Ultra-Miniature Lighting Effects -- Beacon Simulator
|
Smaller than any decoder at just.31'' x.31'' x.118'' and utilizing the industry's smallest microcontroller and associated voltage control circuitry, the total module consumes less than 500 a (<1/2 ma). Typical peak operating current for these modules with LED(s) attached and running through full brightness curves range from 18-38 ma. This makes them ideally suited for operation when powered directly by a function output of any of today's HO, N or Z-scale DCC decoders.
.....
...more about the Ngineering Ultra-Miniature Lighting Effects -- Gyralight Simulator
|
Smaller than any decoder at just.31'' x.31'' x.118'' and utilizing the industry's smallest microcontroller and associated voltage control circuitry, the total module consumes less than 500 a (<1/2 ma). Typical peak operating current for these modules with LED(s) attached and running through full brightness curves range from 18-38 ma. This makes them ideally suited for operation when powered directly by a function output of any of today's HO, N or Z-scale DCC decoders.
.....
...more about the Ngineering Ultra-Miniature Lighting Effects -- Ditch Light Simulator
|
|
|
|
|
|
|