Model Trains

This is an N Scale Lighted 2-Light Railroad Signal with Switch from Model Power. Features: * Oval shaped plastic plate with two shaded lights, red on top and green on bottom. * Black plastic base with white pole has a black plate reading "8568". * A black ladder runs up the back for signal maintenance. * Includes 3-way prewired switch.
...more about the Model Power Railway Signals 2 Light N

This is the MRC Diesel Sound Decoder Suitable for Ages 16 & Older. Features: * Full function, dual mode sound decoder lets you get synchronized diesel rumble sounds on a DC layout. * One piece sound decoder/speaker combination. * Easy to install. * there's no connectors, no wiring, no machining! All 28 NMRA available functions. * Choices of 8 bells and 16 different horns. * 28 accessory functions. * 2 selectable diesel prime mover types with randomly associated locomotive sounds. * Programmable individual sound volumes. * Selectable factory default speed curve. * 1. 0 amp capacity. * Programmable for either 2-digit or 4-digit addresses. * Programmable start voltage, acceler
...more about the MRC Decoder Diesel Kato P42 N

This is an HO Scale Warning Light with Relay from Model Power. Features: * 3 Light Warning with Relay Signal. * 4-Way prewired switch. * Brass parts. * Signal Light: White pole signal light sits atop a black base which is pre-wired. Attached to the top of the pole is a three signal light. * (red, green and amber). The signal light features a black ladder.
...more about the Model Power 3-Light Warning w/Relay Signal & 4-Way Switch HO

Light up any HO Scale Model layout with these Single Highway Lights & Lamp Posts realistically designed by Model Power,. Features: * Handcrafted brass posts painted gray with circular bases. * Prewired lamp posts. * Light bulbs included. * Metal light reflectors. * Carded packaging.
...more about the Model Power Sngl Hghwy Lamp Posts 2-1/4'' (4) HO

This is the Remote Switch Machine from Aristo-Craft. Features: * Convert your manual switch into a remote switch with this kit! * Motorized switch machine. * Control device. * Marker lights. * Additional springs.
...more about the Aristo-Craft Remote Switch Machine w/Control Box - G-Scale

This is a MRC Rectangle Speaker. Features: * High quality miniature speaker. * Black plastic housing with baffle. * Pre-soldered wire harness for HO gauge trains.
...more about the MRC Rectangle Speaker 16x35mm w/Baffle

Features: Features an open staircase and a half-timbered exterior.
...more about the Faller Gmbh Mittelstadt Yard Tower -- 1-5/8 x 1-1/8 x 1-5/8'' 4 x 2.8 x 4.2cm - Z-Scale

This is the IMEX Perma-Scene Levittown Cape Cod House. Ideal for Dioramas and N Railroad. Features: Fully assembled, ready for use right out of the box Realistic molded plastic contruction Cream building with blue roof.
...more about the Imex Model Co Levittown Cape Cod House Built-Up N

This is the IMEX Perma-Scene Levittown Jubilee House. Ideal for Dioramas and N Railroad. Features: Fully assembled, ready for use right out of the box Realistic molded plastic contruction Light brown building with grey roof.
...more about the Imex Model Co Levittown Jubulee Built-Up N

This is the IMEX Perma-Scene Built-Up Sukup Grain Tower. Ideal for Dioramas and N Scale Railroads. Features: Fully assembled, ready for use right out of the box Realistic molded construction.
...more about the Imex Model Co Perma-Scene(TM) Cold Cast Resin Buildings - Assembled -- Sukup Grain Tower Version #4 - N-Scale

Features: The parts of these structures are made from the finest quality basswood, which has been laser-cut and engraved. This produces detail that rivals most plastic models., and re-creates the look of stone or wood construction. The models can be assembled in about the same time as a plastic kit, but since wood parts are used, no toxic glues are needed. The kits are also easy to paint and have a true-to-life look when finished.
...more about the Northeastern Scale Models Small Trackside Structure Series -- First National Bank & Trust Co. 1-3/4 x 4'' 4.3 x 10cm - N-Scale

This is the Barb's Bungalow Garage Kit from Atlas Suitable for Ages 12 & Older. Features: * Laser-cut micro-plywood parts that create superb realism! Self-adhesive laser-cut micro-plywood window and door frames. * Window glazing. * Laser-cut styrene, self-adhesive stone work. * Gray plastic sheets with fine shingle details. * Detailed instructions.
...more about the Atlas Barb's Bungalow Garage Kit HO

Features: Upgrade your engine terminal with this authentic replica, typical of tower used throughout Canada and the United States, Model features moveable arms and operating counterweights, and can be built with or or two arms to service any size terminal. Easy-to-build kit features plastic parts, a photo-etched safety cage ladder and handrail, plus step-by-step instructions.
...more about the American Limited Models Diesel Sanding Tower - Kit - HO-Scale

Features: Features precision laser-cut basswood and plywood parts that assemble much like plastic kits. Kit includes two siding styles; interior partition walls; peel and stick slate shingles, ornate white metal roof caps, finials, and chimney; and individual rafter tails. Walls and major assemblies have tab-and-slot construction.
...more about the American Model Builders Baltimore & Ohio Railroad Class C 20 x 60' Depot -- 8-1/2 x 3-1/2 x 3-1/2'' 21.2 x 8.7 x 8.7cm - HO-Scale

Features: * The Pennsylvania Railroad was the largest railroad by traffic and revenue volumes in the US throughout its 20th-century existence and, at its peak, controlled some 10,000 miles of rail line. As such, the Pennsy became known as the Standard Railroad of the World not only for the standard to which all other railroads could aspire, but standard in its equipment and structure designs as well. * These kits are based on PRR standard prototypes that not only are a must for every Pennsy fan's layout, but look right at home on any model railroad dating from the early 1900s through the 1960s. * Watch Boxes were placed at grade crossings where no automatic crossing gate e
...more about the American Model Builders Pennsylvania Standard Watch Box (Laser-Cut Wood Kit) - pkg(2) -- 1911 - 1 x 3/4 x 1-1/2'' 2.5 x 1.9 x 3.8cm - HO-Scale

Barb's Bungalow from Atlas Model Railroad Company's Lovely Ladies Home Series is ready for display on your HO scale layout. Features: * Modeled after a popular catalog home of the 1920's, Barb's Bungalow Home is the second release in the Lovely Ladies Home Series. * This HO scale trackside structure is made of styrene plastic and molded in appropriate colors so no paint is needed. * Black doors and window frames with window glazing. * White clapboard siding. * Roof has black shingles. * Bilco cellar doors. * Light gray cement block foundation/basement with windows. * Rain gutter and down spout detail. * Brick chimney (brick red). * There is a pre-cut hole in the bottom to i
...more about the Atlas Lovely Ladies Home Series(TM) - Barb's Bungalow - Assembled -- 6-1/4 x 3 x 2-3/4'' 15.9 x 7.6 x 7cm (Colors may vary) - HO-Scale

Features: * The right size building for any scene, this small structure makes a great out building down on the farm, or it could be any type of industrial shop. * A removable roof allows you to show off the full interior framing detail, and any interior details you might want to add. Scale door handles are also included. Color instructions with an exploded view are also included.
...more about the B.T.S. Pritchard's Barn - HO-Scale

Features: Modular high-rise buildings can be built to any number of stories using add-on story kits. Basic office building kit includes six floors and includes entry doors and outdoor canopy. Add-on floor kits include two floors.
...more about the Busch Gmbh High Rise Office Buildings - 7-11/16 x 7-11/16 x 11-13/32'' -- Gold Exterior - HO-Scale

Features: clear window material and complete instructions. Architectural details are molded in place for easy assembly in minutes. Use any plastic model cement or solvent.
...more about the Design Preservation Models 100 Series Kits -- J. C. Nickels 6-3/4 x 4'' 17 x 10.2cm - HO-Scale

This is an HO Scale Structure Kit Containing Plastic Pieces to Construct Schultz's Garage Building from Design Preservation Models. Features: * This garage is a one story building. * Extreme realism is displayed with this building. * Wall sections are molded in a concrete cream color. * Rectangular window frames are molded in a brick red color. * Paintable plastic pieces with brick detail. * Clear plastic material is used to create realistic windows. * White styrene plastic roof sheet. * This is the quick and easy route to realism with your HO scale layout. * Create life-like cities, villages or towns.
...more about the Design Preservation Models 200 Series Building Kits -- Schultz's Garage 3 x 4-3/4'' 7.7 x 12.2cm - HO-Scale

This is an HO Scale Plastic Structure Kit of Fedups Freight Co. for Realistic Model Layouts by Design Preservation Models. Features: * Fedups Freight Company has extraordinary detail. * Extreme realism is displayed with this building. * Wall sections are molded in a brick red color. * Brick parapet-wall trim strips detail inside tops of building. * Pilaster sprues. * Paintable plastic pieces with brick detail. * Multi-level building with a dock. * White styrene sheet is used for the roof. * Arched shaped windows molded in a brownish yellow color. * Clear plastic material is used as the windows. * This is the quick and easy route to realism with your HO scale layout. * Creat
...more about the Design Preservation Models Fedups Freight Co. -- 19-3/4 x 8-3/4'' 50 x 22.2cm - HO-Scale

Features: This wooden goods shed has sliding freight doors and a natural stone foundation. It's ideal for 1920s to 40s layouts.
...more about the Faller Gmbh Goods Shed -- Painted & Weathered, Era II 8 x 6-1/8 x 4-1/8'' 20.5 x 15.5 x 10.5cm - HO-Scale

Features: Small air conditioning unit, large evaporative cooler, J vents assorted vents and two small evaporative coolers.
...more about the Great West Models Create-A-Scene -- Roof Details - HO-Scale