Model Trains

This row of six half-depth houses is perfect for adding depth to your background scenes. Each is detailed only on the front side so they're easily placed against your painted or printed background. The six houses measure;. 3-1/2 x 1-1/8 x 3-9/16 8. 9 x 2.8 x 9cm. 3-1/2 x 1-1/4 x 3-9/16 8.9 x 3.2 x 9cm. 1-3/4 x 1-1/8 x 3-5/8 4.5 x 2.8 x 9.2cm. 1-3/4 x 1-1/4 x 3-5/8 4.5 x 3.2 x 9.2cm. 1-3/4 x 1-1/8 x 3-1/4 4.5 x 2.8 x 8.2cm. 1-3/4 x 1-1/8 x 3-1/4 4.5 x 2.8 x
...more about the Faller Gmbh Six Relief Houses - Half Built - N-Scale

This 2003 exclusive consists of a three-stall garage with movable rolling shutter doors, an office building, a three-stall vehicle shelter and three emergency vehicles with special
...more about the Faller Gmbh Exclusive Model 2003 -- 50 Years Malteser Emergency Service - N-Scale

Everyone will want a ride on this marvel of the midway! As exciting as the real thing, the detailed model is complete with 24 colorful gondolas, a ticket booth/entryway and lots of details. For more fun, you can build a working model using the 18 R PM Electric Motor (#272-180629), sold
...more about the Faller Gmbh Ferris Wheel (Plastic Kit) -- 8 x 5-13/16 x 8-13/16'' 20 x 13 x 22cm - N-Scale

With a swirl of motion and bright lights, this operating ride will animate any midway. This colorful kit is perfect for any fair midway, carnival or amusement park scene. It's complete with motor and can be illuminated with light set #272-180671, s old
...more about the Faller Gmbh Chairoplane w/Motor -- Dia- 2-3/4'' (6.8cm), Height- 2-3/4'' (6.8cm) - N-Scale

Here's a charming country chapel with a unique bell tower. This fully assembled model is ideal for rural
...more about the Faller Gmbh St. Bernhard Chapel - Assembled -- 2-1/8 x 1-3/8 x 2-5/8'' 5.3 x 3.5 x 6.6cm - N-Scale

Typical Black Forest sawmill features half-timbered construction. The non-operating mill is fully assembled, complete with landscape details and ready for your
...more about the Faller Gmbh Sawmill - Assembled -- 6-3/4 x 4-5/8 x 3-3/8'' 17.1 x 11.8 x 8.3cm - N-Scale

Create an ideal place for hunting on your layout. Kit features hunting lodge, raised deer stand (hide) and fir
...more about the Faller Gmbh Lodge with Raised Hide - N-Scale

1-3/8 x 3/4 x 3/4'' 3.5 x 1.9 x 2cm. 1-5/8 x 1/2 x 7/8'' 4.1 x 1.3 x 2.2cm. Perfect for use at any bus stop or rapid transit
...more about the Faller Gmbh Bus Stop Shelter -- Pkg (2) - N-Scale

1-1/2 x 11/16 x 1/2'' 3.8 x 1.8 x 1.4cm. 1-15/16 x 5/8 x 5/8'' 3.3 x 1.5 x 1.6cm. What better way to spend a summer afternon than taking a lesiurely bicycle ride along the trail. Many bicycle trails run through parks and farmland. Others use abando ned railroad right-of-ways or use the right-of-way next to the tracks. Urban areas often have dedicated bicycle lanes and bicycle stands for
...more about the Faller Gmbh Bicycle Stands -- Pkg(2) - N-Scale (2)

A great trackside structure for a busy junction or crossing! Kit includes 113 laser-cut pieces; two floor sections; laser-cut rolled roof sheathing with hidden alignment grid and trusses; etched siding; etched chimney assembly with decorative cap; two etched entry doors with casing; 18 laser-cut window sash and mutton details with casing; laser-cut corner trim; laser-cut stair with railings and open stringer treads; acetate glazing and sheet paper roofing
...more about the GC Laser Tower B12 Circa 2000 (Laser-Cut Wood Kit) -- 2-11/16 x 1-19/32 x 2-9/32'' Footprint - N-Scale

Here's a basic structure that can serve a variety of purposes on the farm, in a back yard or trackside. Kit includes laser-cut parts, positionable door and complete
...more about the GC Laser Laser-cut Kit - Storage Shed w/Board & Batten Vertical Siding -- 1 x 1-1/8 x 7/8'' - N-Scale

Great for use down on the farm or trackside as a railroad shanty. Kit consists of 38 laser-cut pieces and includes a small outside tool/coal
...more about the GC Laser Tool Shed (Laser-Cut Wood Kit) -- 1-9/32 x 1 x 15/16'' Footprint - N-Scale

It's easy to herd those cattle and other livestock into waiting stock cars with this wooden ramp. Kit features laser-cut parts and complete
...more about the GC Laser Stock Loading Ramp (Laser-Cut Wood Kit) -- 1-15/16 x 1/2 x 1-1/8'' Footprint - N-Scale