American-Models Model Trains

Wood water tanks on towers could be found just about anywhere across the US throughout the golden age of railroading. Whether in an industrial setting, out on a farm, or trackside, water was always needed for a variety of purposes. This kit also co mes with a small pumphouse, where a small gasoline or distillate engine would have driven a pump to keep the tank filled. The laser-cut wood kit uses Tab & Slot and Peel & Stick technology and includes easy-to-build access ladders
...more about the American Model Builders LASERkit(R) Water Tank w/Pump House - Kit (Laser-Cut Wood) -- Tank 8'' Tall w/4 x 3-1/4'' Base - Pump House 3 x 2 x 2-3/4'' - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . 100% Laser-cut wood for a perfect fit. Pre-cut window and door openings, peel
...more about the American Model Builders Dill's Market -- 6 x 4-1/2 x 4-1/2'' 15.2 x 11.4 x 11.4cm - O-Scale

Based on a famous New Mexico station that sat atop Cumbres Pass, this kit features an interior floor with partition walls, accurate laser-cut roof brackets, white metal chimneys and peel-and-stick
...more about the American Model Builders Denver & Rio Grande Western Cumbres Depot -- 10-1/2 x 6 x 5'' - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . Laser-cut peel and stick tarpaper over laser-cut roof and walls - no painting
...more about the American Model Builders Sonny's Shack -- 8 x 4 x 3'' 20.3 x 10.2 x 7.6cm - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . 100% Laser-cut with peel and stick window and door construction. Great as part
...more about the American Model Builders Long Bell Lumber Co. Skid Shack -- 4 x 3 x 2-3/4'' 10.2 x 7.3 x 7cm - O-Scale (2)

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . Perfect for any road, any era. Features a wonderful bay window and Laser-cut
...more about the American Model Builders Springfield Depot -- 10 x 5 x 4'' 25.4 x 12.7 x 10.2cm - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . A single story section house based on a Rio Grande prototype. 100% Laser-cut
...more about the American Model Builders One Story Section House -- 4-1/2 x 10-1/4 x 4-1/4'' 11.4 x 26 x 10.8cm - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . Quick and easy. Works great as a switchman's shanty, miner's cabin, general
...more about the American Model Builders Miner's Cabin - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . Great for any corner of your O Scale layout where passengers might wait for a
...more about the American Model Builders Pacific Electric Style Passenger Shelter - O-Scale (2)

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. Here's a multipurpose facility that will fit just about anywhere on your layout.
...more about the American Model Builders Elevated Warehouse -- 9-3/4 x 4-3/4 x 4-1/2'' 24.7 x 12 x 11.4cm - Dock Adds 2'' 5cm to Length - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . Based on a Boston & Maine design, 100% laser-cut wood with a wonderful rear
...more about the American Model Builders Yard Office -- 5-1/2 x 4 x 5-1/2'' - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . This clapboard house features front and rear covered porches, tabbed, peel and
...more about the American Model Builders Two Story House -- 8 x 7 x 6'' 20.3 x 17.8 x 15.2cm - O-Scale

Features include covered front porch, beautiful recessed entryway with large display window and peel-and-stick window, door and roof
...more about the American Model Builders Ellington Mercantile -- 12 x 11 x 6'' - O-Scale

This wooden facility includes a hoist house with attached changing room, headframe with loading house and a tailings trestle. Coal chutes are provided for both railcar and truck loading. Kit features laser-cut bass and plywood parts that assemble m uch like plastic
...more about the American Model Builders Martinsburg Coal Mine #1 Laser-Cut Kit -- 20 x 20 x 8-1/2'' 50 x 50 x 21.2cm - O-Scale

The American barn is one of the most beloved icons of our culture. Built in all different shapes and sizes, many are still used to house animals and feed. The loft style barn, as depicted by this kit, was seen all across the US; the upper loft was used to store hay, while the lower level provided space for livestock and a handy place to store smaller machinery out of the weather. Designed for easy assembly, this LASERkit wood model features tab & slot and peel & stick
...more about the American Model Builders Loft Barn -- 6 x 4-1/4 x 6'' 15.2 x 10.7 x 15.2cm - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . A great small town or crossroads depot. Includes station
...more about the American Model Builders Branchline Station w/Platform -- 6 x 4-1/4 x 3-1/2'' 15 x 11.2 x 8.7cm - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts.
...more about the American Model Builders Crossroads Church -- 7 x 4 x 6'' 17.5 x 10 x 15cm - O-Scale

Typical of stations found all over the US and Canada, the All-American Gas Station is based on a cottage style structure located in Harlingen, Texas, in the late 1930s. The 100% laser-cut building features Tab & Slot and Peel & Stick constr ith clapboard siding, simulated metal roofing, interior floor and wall partition, and door knob/lock plate details on the main and restroom access doors. Detail parts consist of cast resin pumps with separate pump handles and
...more about the American Model Builders LASERkit(R) All-American Gas Station - Laser-Cut Wood Kit -- 4-1/2 x 3 x 4'' 11.4 x 7.6 x 10.1cm - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . A typical company house design as seen lined up in a row behind a mill or a
...more about the American Model Builders Company House -- 5-1/4 x 4-1/2 x 3-1/2'' 13.1 x 11.2. 8.7cm - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . False-front building features wood boardwalk, interior floor and wall
...more about the American Model Builders McCormac's Dry Goods -- 9-1/2 x 4-1/2 x 5'' 24.1 x 11.4 x 12.7cm False-Front Building - O-Scale

Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. . Includes track
...more about the American Model Builders Gandy Dancer's Shack (Laser-Cut Wood Kit) -- 7 x 3 x 3'' 17.8 x 7.6 x 7.6cm - O-Scale

Common on Santa Fe lines throughout the system, in an age before radio communications, these little six-sided wooden phone booths were placed near telegraph lines at points where train crews might need to contact the dispatcher - typically ends of sidings, junctions, or points where spurs or drill tracks entered the main line. Similar looking prototypes once populated the right of ways of many other US railroads as well. Kit #183 includes three (3) telephone booths that
...more about the American Model Builders ATSF Standard Telephone Booths (Laser-Cut Wood Kit) - pkg(3) -- Each 3/4 x 3/4 x 1-1/2'' - HO-Scale