Model Trains

...more about the Faller Gmbh Lumber Yard, Era II -- 7.2 x 4.8 x 3cm - N-Scale

...more about the Faller Gmbh Four Haycocks & Accessories -- 1-5/8 x 1-7/16'' 4.2 x 3.8cm - N-Scale

Create an ideal place for hunting on your layout. Kit features hunting lodge, raised deer stand (hide) and fir .....
...more about the Faller Gmbh Lodge with Raised Hide - N-Scale

...more about the Faller Gmbh Market Stands & Cart - N-Scale

1-3/8 x 3/4 x 3/4'' 3.5 x 1.9 x 2cm. 1-5/8 x 1/2 x 7/8'' 4.1 x 1.3 x 2.2cm. Perfect for use at any bus stop or rapid transit .....
...more about the Faller Gmbh Bus Stop Shelter -- Pkg (2) - N-Scale

1-1/2 x 11/16 x 1/2'' 3.8 x 1.8 x 1.4cm. 1-15/16 x 5/8 x 5/8'' 3.3 x 1.5 x 1.6cm. What better way to spend a summer afternon than taking a lesiurely bicycle ride along the trail. Many bicycle trails run through parks and farmland. Others use abandoned railroad right-of-ways or use the right-of-way next to the tracks. Urban areas often have dedicated bicycle lanes and bicycle stands for .....
...more about the Faller Gmbh Bicycle Stands -- Pkg(2) - N-Scale (2)

...more about the Faller Gmbh Arcades w/Shops -- 1-7/8 x 13/64 x 8-11/64'' 4.7 x .5 x 20.4cm - N-Scale (2)

...more about the Faller Gmbh arcades w/Wall Arches -- 1-7/8 x 13/64 x 8-11/64'' 4.7 x .5 x 20.4cm - N-Scale (2)

A great trackside structure for a busy junction or crossing! Kit includes 113 laser-cut pieces; two floor sections; laser-cut rolled roof sheathing with hidden alignment grid and trusses; etched siding; etched chimney assembly with decorative cap;two etched entry doors with casing; 18 laser-cut window sash and mutton details with casing; laser-cut corner trim; laser-cut stair with railings and open stringer treads; acetate glazing and sheet paper roofing .....
...more about the GC Laser Tower B12 Circa 2000 (Laser-Cut Wood Kit) -- 2-11/16 x 1-19/32 x 2-9/32'' Footprint - N-Scale

Here's a basic structure that can serve a variety of purposes on the farm, in a back yard or trackside. Kit includes laser-cut parts, positionable door and complete .....
...more about the GC Laser Laser-cut Kit - Storage Shed w/Board & Batten Vertical Siding -- 1 x 1-1/8 x 7/8'' - N-Scale

...more about the GC Laser Out House (Laser-Cut Wood Kit) -- 7/16 x 7/16 x 5/8'' - pkg(2) - N-Scale

Great for use down on the farm or trackside as a railroad shanty. Kit consists of 38 laser-cut pieces and includes a small outside tool/coal .....
...more about the GC Laser Tool Shed (Laser-Cut Wood Kit) -- 1-9/32 x 1 x 15/16'' Footprint - N-Scale

It's easy to herd those cattle and other livestock into waiting stock cars with this wooden ramp. Kit features laser-cut parts and complete .....
...more about the GC Laser Stock Loading Ramp (Laser-Cut Wood Kit) -- 1-15/16 x 1/2 x 1-1/8'' Footprint - N-Scale

...more about the GC Laser Laser Cut Platform Kit (Use w/Box from Classic Metalworks R-190 Trucks) -- Cold Storage - 5/32 x 1-29/32 x 3/4'' - N-Scale

...more about the GC Laser Laser Cut Platform Kit (Use w/Box from Classic Metalworks R-190 Trucks) -- Dry Transfer- 7/32 x 1-13/16 x 27/32'' - N-Scale

...more about the GC Laser Laser Cut Platform Kit (Use w/Box from Classic Metalworks R-190 Trucks) -- Bulk Ice- 5/32 x 1-5/8 x 3/4'' - N-Scale

...more about the GC Laser 1-Car Garage (Laser-Cut Wood Kit) -- 1-1/2 x 2 x 1-1/4'' - N-Scale

...more about the GC Laser 2-Car Garage (Laser-Cut Wood Kit) -- 2-3/8 x 2 x 1-5/8 - N-Scale

...more about the GC Laser Speeder Shed (Laser-Cut Wood Kit) -- 1-1/8 x 1-1/4 x 13/16'' - N-Scale

This simple shelter protected passengers from the rain, wind and elements while they waited for the train to arrive. These small structures were placed at whistle or flag stops on lightly used routes where there weren't enough passengers to build a full-size .....
...more about the GC Laser Pennsylvania Railroad Passenger Shelter Circa 1911 (Laser-Cut Wood Kit) -- 7/8 x 1-1/8 x 1-3/16'' - N-Scale

Perfect for almost any modeling era, this structure packs a lot of detail in a compact space. Kit includes 109 laser-cut pieces; notched inter-locking walls; floor sections for squaring structure; etched horizontal siding; four each freight and entry doors; 20 laser-cut windows; six roof sheathing pieces with decorative trusses at the roof line; three chimney assemblies and laser-cut .....
...more about the GC Laser Freight Depot - Non-Trussed Walls (Laser-Cut Wood Kit) -- 6-15/16 x 2-13/16 x 2-1/8'' Footprint - N-Scale

This fancy structure is perfect for more important towns along your railroad and features decorative trussed walls. The kit features 141 laser-cut pieces including; three sets of stairs, a ramp, 23 roof trusses, four each freight and entry doors, 20 windows, 10 one-piece wall trim sections with corner, door and window trim etched in place, six roof sheathing parts with decorative sheathing on the roofline, three chimney assemblies and laser-cut .....
...more about the GC Laser Freight Depot - Trussed Walls (Laser-Cut Wood Kit) -- 7-21/32 x 2-11/16 x 2-5/16'' Footprint - N-Scale

Dress-up any N Scale rural area with this handsome set of structures! Kit includes 170-laser cut parts to build both the barn and .....
...more about the GC Laser Ellis' Barn & Silo (Laser-Cut Wood Kit) -- 6-5/8 x 5-1/8 x 4-7/16'' Footprint - N-Scale

You'll find lots of ways to use this building along your layout. With appropriate vehicles and figures (sold separately) it will make a great used car dealership, body shop, trucking terminal garage and much more. Walls and chimney are laser-etched to simulate cinder block construction. Includes 34 laser-cut .....
...more about the GC Laser M&J Service Station (Laser-Cut Wood Kit) -- 5-3/8 x 4-3/16 x 1-15/16'' Footprint - N-Scale

In the days of ice-cooled reefers, large docks like these were often seen at the edges of yards and along the mainline. Kit includes 17 laser-cut bent assemblies with sway braces, a laser-etched deck with wheel tracks for ice carts, plus three ladders, railings, stairs, braces and spacers. Can be enlarged with Icing Platform Add-On (#292-3062), sold .....
...more about the GC Laser Icing Platform (Laser-Cut Wood Kit) -- 11-7/8'' x 1-7/16'' x 1-7/16'' Footprint - N-Scale

A great detail for modern layouts, youll find all kinds of fresh fruit, honey, vegetables and more sold in roadside stands like this. The kit includes 55 laser-cut parts including display table, lattice work and .....
...more about the GC Laser Country Market (Laser-Cut Wood Kit) -- 1-3/4 x 2-1/32 x 15/16'' Footprint - N-Scale

An American classic! Typical of drive-ins from the late 50s and early 60s, some of these buildings are still used by other types of businesses today. Kit includes 74 laser-cut parts printed signs; roof vent assembly; two seating assemblies; meter socket and piping at rear; roof jig system with precut holes for lighting and interior .....
...more about the GC Laser Lou's Drive-In (Laser-Cut Wood Kit) -- 2-3/16 x 6-1/2 x 1-3/8'' Footprint - N-Scale

Keep your livestock fed year 'round with this neat structure on your scale farm. Each consists of 16 laser-cut pieces, including the dryer house. A ladder with enclosure, assembly jig and one-piece conical roof are all .....
...more about the GC Laser Silo - pkg(2) (Laser-Cut Wood Kit) -- Each- 2 x 1-11/16 x 4-7/16'' Footprint - N-Scale

This operation will generate plenty of freight traffic for your railroad! Kit includes 455 laser-cut pieces plus 72 laser-cut rolled roofing and cap pieces, two etched chimney assemblies with caps; seven working entry doors; five working, double freight doors; 44 laser-cut; two laser-etched platforms with cross-buck framing; four stair assemblies; a billboard; 24 gable vents; five cupolas; corner trim; printed peel-n-stick signs; eight pallets and six .....
...more about the GC Laser Tony's Lumber Warehouse (Laser-Cut Wood Kit) -- 13-7/8 x 7-5/8 x 3-11/16'' Footprint - N-Scale

This finely detailed structure is based on a Chicago Great Western prototype located along the mainline in Elmhurst, Illinois. It's typical of other wood depots found throughout the Midwest. Kit includes laser-cut parts, positionable doors and windows and complete .....
...more about the GC Laser Elmhurst Depot (Laser-Cut Wood Kit - Chicago Great Western Prototype) -- 3-7/16 x 2-9/16 x 1-9/16'' Footprint - N-Scale