Features: * Late-1800s Depot in HO Scale from Atlas. * Patterned after an 1872-built prototype constructed for the New Jersey Midland Railroad (a Susquehanna predecessor), this plastic model is a full-scale replica of a typical Victorian-era structure that'll look great on any layout. The model is available as an easy-to-build kit or assembled in three different color schemes. Features include separate window glazing, separate brick platform, plenty of small details like finials, benches and more, plus decals for various station names. * Kit Version:. * Maywood Train Station Kit Tan w/Brown Trim (150-720). * Assembled Versions:. * Tan w/Brown Trim (150-6201). * Gray w/Maro
...more about the Atlas Maywood Train Station - Built-Up -- Pale Green w/Dark Green Trim - 9-1/4 x 4-1/4 x 3'' 23.1 x 10.6 x 7.5cm - HO-Scale
|
|
|
|
|
Features: Track workers, section gangs, signal maintainers and roadmasters used handcar set-offs to clear the line for passing trains, and to turn their handcars and motorcars for the return trip. Some roads required set-offs every mile, and they were often found at signals and sidings as well. Based on prototype railroad standards, this kit includes parts to build three complete stand-offs on a fill (with supports for one end) or level ground.
...more about the Blair Line Handcar Set-Off - Kit (Laser Cut Wood) -- 1 x 11/16'' 2.5 x 1.8cm pkg(3) - HO-Scale
|
|
Features: * A fun way to bring back old memories. Sure to be a conversation piece on your layout. Kit includes screen tower, ticket booth, signs and fences. * Components are precolored plastic, ready for quick, easy assembly. Includes three different marquee signs and 17 movie signs featuring films from the 1930s to the 1960s. Space-saving design fits against a backdrop or a wall. * May also be built as a stand-alone model. Build it with a parking lot and display your HO Scale vehicle collection.
...more about the Blair Line Drive-In Theatre - HO-Scale
|
|
Features: This type of structure was (and still is) a roadside icon all over this country. Beckoning tourists and travelers to stop and see something to tell the folks back home about and maybe spend a few dollars on some priceless souvenirs or fireworks. This fun and easy-to-build kit includes one laser-cut wood structure, and full-color signs for four different businesses: Fireworks Stand, Totem Pole Trading Post, Reptile Ranch and Hollywood Wax Museum. Also includes a sheet of advertising signs.
...more about the Blair Line Roadside Tourist Trap (Four Optional Signs) -- 5 x 3-1/4'' 12.5 x 8.1cm - HO-Scale
|
Features: This bridge has square post piers that sit on horizontal bottom supports (concrete or stone on the prototype), and is the first bridge kit with laser-cut wood parts. This type of trestle was found on nearly every railroad in North America. Trestle may be built straight or curved and includes laser-cut piers and bulkheads, Micro-Engineering's Bridge Flex Trak, and pre-cut wood parts. Also includes full-scale templates and curve templates to aid in assembly.
...more about the Blair Line Pile & Frame Trestle Kit -- Laser-Cut 6'' Wide x 2'' Tall 15 x 5cm - HO-Scale
|
|
|
|
|
|
Features: Company houses were found in many coal-mining towns and timber camps, where housing was scarce. Employers provided housing of a standard design for workers, and company towns would consist of several of these housing units. This kit would also make an excellent sharecropper's home, hillbilly shanty, or "house on the wrong side of the tracks.".
...more about the Blair Line Company House -- 3-1/2 x 2'' 8.7 x 5cm - HO-Scale
|
Features: Found in coal mining areas of Appalachia and anywhere cal, stone and other minerals were mined and delivered b truck or wagon to be transported by rail. Makes a great destination for your hopper cars and gondolas, and a space-saving way to model an offline model industry. Includes laser-cut stairs, rails, piers and more.
...more about the Blair Line Truck Dump - Kit -- 4 x 1-3/4'' 10 x 4.3cm - HO-Scale
|
|
|
|
Features: * Based on an actual gas station that served drivers on US 66 near Carthage, Missouri, this classic cottage design is typical of filling stations built in many areas during the 1920s and 30s. While the gas station closed in the mid 1980s, the prototype is still standing and is home to a pet grooming business. * The kit features laser-cut interior and exterior walls, doors, window frames, trim floor, roofing and sign frames. Extra details include the island, gas pumps, chimney, tire display and a soda machine. Full-color signs and decals based on actual gas station advertising are included to model either a Conoco dealer or an independent named Ernie's. A laser-cu
...more about the Blair Line Ernie's Conoco Station -- 5 x 3.25'' - HO-Scale
|
|
|
Features: Be sure depots, towers and other facilities have plenty of coal on hand with these storage buildings nearby. Based a C&O standard design that held 10 tons of coal, they're typical of small sheds used on most American railroads. In later years when coal was no longer needed, many were put to work as tool or storage sheds. (You could also use it as a shed on a farm or alongside a small industry.) The kit features laser-cut board & batten walls, door, floor and sub-roof. Laser-cut, peel and stick trim and roofing material are also provided in the kit.
...more about the Blair Line Coal Storage House -- 1-3/8 x 1-3/8'' 3.4 x 3.4cm - HO-Scale
|
Features: * An essential part of any railroad, scale houses could be found at most yards and near major industries that shipped in bulk, such as mines and grain elevators. Railroads charged by weight, so cars were first weighed as empties, then reweighed after loading. * Based on a Chesapeake & Ohio prototype located at Lynchburg, Virginia, the model is typical of such buildings used by many other roads. It could also serve as a guard shack or storage building at an industrial site, or a chicken coop down on the farm. * The kit features laser-cut board and batten walls, door, floor and sub-roof, along with peel-n-stick trim and roofing. For the interior, a laser-cut scale
...more about the Blair Line Scale House (Laser-Cut Wood Kit) -- 3/4 x 1-3/4'' 1.9 x 4.3cm - HO-Scale
|
|
Features: * Inspired by a model of the Silver King Ore House in Park City, Utah, this classic building is a great addition to any mine scene. * The kit captures all of the flavor of the real thing, with its varied roof lines, exposed structural framing and covered loading areas that serve two tracks. Designed for easy construction, it includes laser-cut walls with tab and slot connections, doors, window frames, trim, floor, roofing and structural frames.
...more about the Blair Line Cash Mine Works Ore House - Kit -- Laser-cut wood kit measures- 7-1/2 x 8-1/2'' - HO-Scale
|
|
Features: * The pagoda style or flared roof eaves along with the bay window on the front make this a unique, but very attractive station. This style of roof was an inexpensive way to add interest to an otherwise common structure and was used by the Rock Island and several other railroads. At 24' wide x 40' long this is a small size wood combination passenger and freight station. The prototype originally included a loading ramp that was removed in the depot's later days. Our kit includes the ramp and may be built with or without it. The prototype had exterior walls of lap siding with a wainscot of novelty siding. Although this structure is based on a Chicago, Rock Island an
...more about the Blair Line Leeton Depot (Laser-Cut Wood Kit) -- Main Building- 3-5/16 x 5-1/2'' - Ramp-1 x 3-1/4 - HO-Scale
|
Features: Long before look-alike fast food chains, small roadside cafes like these catered to travelers and truck drivers along the nation's major two-lane highways. Here and there, a few still survive today. Packed with details, the kit includes a laser-cut floor, aged sidewalks and exterior walls featuring laser-etched nail holes. Plastic windows are included, along with signs, burglar bars, lampshades, a cast metal smokejack, plus laser-cut OPEN and EAT signs for the finishing touch.
...more about the Blair Line Fred & Red's Hamburgers - Kit -- 2 x 4-1/2'' 5 x 11.2cm - HO-Scale
|
|
|
|
|
|
|
