|
|
Model Trains → Buildings → O/027 Scale
|
|
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * Designed after towers and yard lead-ins found across the country. Beautiful laser-cut stairway and unique hip roof construction. 4 x 3 x 6-1/2".
...more about the American Model Builders Interlocking Tower -- 4 x 3 x 6-1/2'' 10.2 x 7.3 x 16.5cm - O-Scale
|
Features: * Between 1877 and 1894, the Southern Pacific Railroad developed a series of 26 standard depot plans. Of these designs, the One Story Combination Depot Number 23 was used as the basis for over 30 station structures. Built between the years of 1896 and 1918, examples of the Type 23 could be found in both California and Oregon. Although not as numerous as its two-story cousin, the Type 22 with its upstairs living area, the one-story building featured a passenger waiting room, operator's office, agent's quarters, separate express room, and freight room. * Our O scale rendering of this classic 80 foot long x 25 foot wide Southern Pacific design follows the company's
...more about the American Model Builders Laserkit(R) Southern Pacific Combination Type 23 Depot -- Building Measures- 20 x 6-1/4 x 6'' 50.8 x 15.8 x 15.2cm - O-Scale
|
Features: * Built for Maine's two-foot gauge Bridgton & Saco River Railroad, the Handcock Pond Water Tank kit is accurately scaled from multiple prototype photos. Typical of tanks found on narrow gauge lines, it's perfect servicing thirsty On2, On30, On3 and other small O Scale locomotives. * The kit features custom scribed wood sheathing, peel and stick trim and details, plus tab and slot construction. Special features include "nails" and seams pre-scribed into the roofing, a cast resin water spout, a construction jig for building the stairs and easy-to-use, illustrated instructions. When finished, the complete interior water tank is visible through the door, window, and
...more about the American Model Builders LASERkit(R) Handcock Pond Water Tank Kit -- 3-1/4 x 3-1/4 x 4-1/2'' 8.2 x 8.2 x 11.4cm - O-Scale
|
|
|
Features: * This free-standing garage is from the 1920 Bennett Homes catalog as presented by Ray H. Bennett Lumber Company of North Tonawanda, New York. Their Better-Built and Ready-Cut lines were very popular in the years leading up to and after the Great Depression. This kit, based on the Hudson model, was designed to house a touring car with ample working room around the sides. * Featuring typical LASERKIT construction utilizing Tab & Slot and Peel & Stick technology, the kit includes the two 3-light sash sidewall windows, wide opening doors with six-pane windows and hinge detail, milled siding, interior floor, and rolled roofing, just like the prototype. It complements
...more about the American Model Builders LASERkit(R) Single Car Garage - Laser-Cut Wood Kit -- 5-3/4 x 4-1/2 x 3-1/2'' 14.6 x 11.4 x 8.8cm - O-Scale
|
Features: * The Northern Pacific used several different series of standard plans for combination depots containing passenger and freight facilities. Each series had several different sizes of depots and included both one-story and two-story structures. In the years 1889 through 1899, Chief Engineer J. W. Kendrick directed the preparation of a group of plans referred to as the S-26 drawing series that included plans for three different lengths of one-story depots with each length having two versions. The smallest version with low platform, the Class C Combination Depot (the prototype for this kit), was 55 feet long by 24 feet deep. The Class C eliminated the waiting room, h
...more about the American Model Builders Northern Pacific Class C Depot (Laser-Cut Wood Kit) -- 16-1/2 x 8-3/4 x 5'' - O-Scale
|
|
|
|
|
|
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * 100% Laser-cut wood for a perfect fit. Pre-cut window and door openings, peel and stick layered window and door assembly and clear, concise instructions. 6 x 4-1/2 x 4-1/2". A screen door and window set is available separately (152-458, 5.95).
...more about the American Model Builders Dill's Market -- 6 x 4-1/2 x 4-1/2'' 15.2 x 11.4 x 11.4cm - O-Scale
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * Laser-cut peel and stick tarpaper over laser-cut roof and walls - no painting needed. Peel and stick batten strips and laser-cracked glazing complete this great farm outbuilding, shed or small business. 8 x 4 x 3".
...more about the American Model Builders Sonny's Shack -- 8 x 4 x 3'' 20.3 x 10.2 x 7.6cm - O-Scale
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * 100% Laser-cut with peel and stick window and door construction. Great as part of a mining camp, farm workers complex or, without the skids, a row of tourist cabins. 4 x 3 x 2-3/4".
...more about the American Model Builders Long Bell Lumber Co. Skid Shack -- 4 x 3 x 2-3/4'' 10.2 x 7.3 x 7cm - O-Scale (2)
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * Perfect for any road, any era. Features a wonderful bay window and Laser-cut shake style shingles.
...more about the American Model Builders Springfield Depot -- 10 x 5 x 4'' 25.4 x 12.7 x 10.2cm - O-Scale
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * A single story section house based on a Rio Grande prototype. 100% Laser-cut with layered, peel and stick windows, doors and roofing material. 4-1/2 x 10-1/4 x 4-1/4".
...more about the American Model Builders One Story Section House -- 4-1/2 x 10-1/4 x 4-1/4'' 11.4 x 26 x 10.8cm - O-Scale
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * Quick and easy. Works great as a switchman's shanty, miner's cabin, general purpose outbuilding, company house or small store.
...more about the American Model Builders Miner's Cabin - O-Scale
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * Great for any corner of your O Scale layout where passengers might wait for a train, trolley or bus.
...more about the American Model Builders Pacific Electric Style Passenger Shelter - O-Scale (2)
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * Here's a multipurpose facility that will fit just about anywhere on your layout. By itself, the structure could be a small freight house for a railroad, a warehouse for a local merchant, or a distribution center for a trucking company. It could also be part of a larger
...more about the American Model Builders Elevated Warehouse -- 9-3/4 x 4-3/4 x 4-1/2'' 24.7 x 12 x 11.4cm - Dock Adds 2'' 5cm to Length - O-Scale
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * Based on a Boston & Maine design, 100% laser-cut wood with a wonderful rear staircase.
...more about the American Model Builders Yard Office -- 5-1/2 x 4 x 5-1/2'' - O-Scale
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * This clapboard house features front and rear covered porches, tabbed, peel and stick shingle strips and layered, peel-and-stick window and door assembly.
...more about the American Model Builders Two Story House -- 8 x 7 x 6'' 20.3 x 17.8 x 15.2cm - O-Scale
|
|
|
|
Features: * The American barn is one of the most beloved icons of our culture. Built in all different shapes and sizes, many are still used to house animals and feed. The loft style barn, as depicted by this kit, was seen all across the US; the upper loft was used to store hay, while the lower level provided space for livestock and a handy place to store smaller machinery out of the weather. * Designed for easy assembly, this LASERkit wood model features tab & slot and peel & stick construction. A second story interior floor, panel roofing sheets, and sliding style doors that may be modeled in any position are all included. The small size is ideal for most layouts, and the
...more about the American Model Builders Loft Barn - Kit -- 6 x 4-1/4 x 6'' 15.2 x 10.7 x 15.2cm - O-Scale
|
|
|
Features: Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts.
...more about the American Model Builders Crossroads Church -- 7 x 4 x 6'' 17.5 x 10 x 15cm - O-Scale
|
Features: Typical of stations found all over the US and Canada, the All-American Gas Station is based on a cottage style structure located in Harlingen, Texas, in the late 1930s. The 100% laser-cut building features Tab & Slot and Peel & Stick construction with clapboard siding, simulated metal roofing, interior floor and wall partition, and door knob/lock plate details on the main and restroom access doors. Detail parts consist of cast resin pumps with separate pump handles and hose, oil can rack, coin-operated soda chest, and laser-cut island with 4" 10.1cm tall stylized station sign. Full-color printed signs for four different gasoline companies and other gas station pa
...more about the American Model Builders LASERkit(R) All-American Gas Station - Laser-Cut Wood Kit -- 4-1/2 x 3 x 4'' 11.4 x 7.6 x 10.1cm - O-Scale
|
Features: * Designed for ease of construction, all Laserkit structures feature precision laser-cut basswood and plywood parts that assemble much like plastic kits. Unless noted, all kits feature peel-and-stick assembly windows with positionable sashes, doors, trim and roofing material. All walls and major assemblies have tab-and-slot construction. Kits may also include white metal and acrylic detail parts. * A typical company house design as seen lined up in a row behind a mill or a coal mine complex.
...more about the American Model Builders Company House -- 5-1/4 x 4-1/2 x 3-1/2'' 13.1 x 11.2. 8.7cm - O-Scale
|
|
|
|
