Model Trains

Features: Must be connected to 14-16V AC or DC power supply.
...more about the Busch Gmbh Electronic Flames

Features: This two-part device has one infrared sending unit and one receiver. Place them up to 4" 10cm apart (10" 25cm when used in conjunction with 189-5961 and 5963 timers). When a train interrupts the invisible infrared beam they transmit a signal which can be used to activate relays, timers and signal circuits. 3/4 x 3-5/8 x 3/4" 1.8 x 9 x 2cm.
...more about the Busch Gmbh Standard Infrared Light Switch Unit -- For Use With Items 5961 and 5963.

Features: White LEDs produce light approximating the glow of Xenon/Neon lamps. Great for replacing or adding headlights on locomotives, rolling stock, automobiles and building interiors.
...more about the Busch Gmbh Standard LEDs -- 14-16v (2)

Features: * Tapewire is an adhesive-backed Mylar tape containing electrical conductors. * The tape is .005 thick by 5/8" wide and can be painted. It can be run under grass mats or behind wallpaper. Tapewire can be used throughout the layout, but is most useful where "invisible" wiring is desired. Connections are pinned together with brads and do not require soldering.
...more about the Cir-Kit Concepts Inc Tapewire -- 2 Conductor (15')

Features: For connecting tapewire system to transformer lead-in. Use with #206-1008.
...more about the Cir-Kit Concepts Inc Junction Splice

Features: For connecting transformer to tapewire system. Plug on one end mates with Junction Splice. Opposite ends of 6' lead connect to transformer terminals.
...more about the Cir-Kit Concepts Inc Transformer Lead-In Wire

Features: * Miniature swivel spotlight features top mounted 360 side-to-side movement. * Large size bulb is a highly focused lens for light concentration and will burn for 5000+ hours. Bulb snaps in and works on a 12V system. 7/8" long, 3/8" diameter.
...more about the Cir-Kit Concepts Inc Swivel Spotlight

Features: * 5/64" 2.0mm diameter. Use wherever a "to scale" flame look is desired. * Solid 1" wire terminals. 12V 40mA.
...more about the Cir-Kit Concepts Inc Bulb -- 12V Micro-Flame w/Wire Terminals

Features: * SPDT, for turning lights and accessories on and off. Only 1/4 x 7/16" in size. For tape or conventional wiring systems. Instructions included. * Pound-in construction.
...more about the Cir-Kit Concepts Inc Switch -- Miniature Slide

Features: For making small holes for brass brads. Eliminates the risk of making holes that are too large.
...more about the Cir-Kit Concepts Inc Pilot Hole Punch

Features: * Used for connecting tapewire and conventional wiring systems. No soldering required. * Used for connecting tapewire and conventional wiring systems. No soldering is required.
...more about the Cir-Kit Concepts Inc Brass Brads 1/8''

Features: Fuse holder and wire sockets for in-line conmnection. Fuse not included.
...more about the Cir-Kit Concepts Inc In-Line Fuse Holder

Features: Used for connecting tapewire and conventional wiring systems. No soldering required.
...more about the Cir-Kit Concepts Inc Headless Pins (36)

Features: One end is crimped onto conventional wire. The other end may be plugged into headless pins and pinned to tapewire systems.
...more about the Cir-Kit Concepts Inc Wire Sockets (22)

Features: Excellent for holding and inserting 1/8" brass brads. Serrated teeth on both jaws.
...more about the Cir-Kit Concepts Inc Short Nose Pliers

Features: Includes transformer lead-in wire, junction splice, pilot hole punch and needles, 15' tarewire, test probe and 1/8" brass brads.
...more about the Cir-Kit Concepts Inc Basic Wiring Kit II

Features: Five nickel-plated screwdrivers. Blade range of .049 to .079".
...more about the Cir-Kit Concepts Inc Jeweler's Screwdriver Set -- Blade range of .049 to .079

Features: Works with any 10 watt or larger 12V transformer, even a car battery. Melts solder in 3-4 minutes.
...more about the Cir-Kit Concepts Inc Low Voltage Soldering Iron

Features: The perfect tool for any modeler using tapewire! Made of stainless steel with a plastic coated handle, the brad placement tool holds brads firmly in place during placement.
...more about the Cir-Kit Concepts Inc Brad Placement Tool

Features: Used to directly connect 1.5V micro bulbs to a 12V source. A resistor must be connected to each bulb.
...more about the Cir-Kit Concepts Inc Dropping Resistor (3)

Features: Use for 18 to 24 gauge wire. May be crimped or soldered.
...more about the Cir-Kit Concepts Inc Spade Lugs

Features: * For connections where flat tape is not practical. * Very fine, stranded, #32 gauge.
...more about the Cir-Kit Concepts Inc Miniature Wire -- 2 Conductor Hook-Up

Features: For connections where flat tape is not practical.
...more about the Cir-Kit Concepts Inc Miniature Wire -- 1 Conductor

Features: ith this all-electric variable controller, any lamp up to 300 watts may be dimmed or the small power tool up to 2.5 amps.
...more about the Cir-Kit Concepts Inc Dimmer Extension Cord

Features: Works with any 12V system and requires no separate transformer. The orange-colored bulb is a replaceable screw base type with a MH658 plug attached to the small gauge along with a 24" long power cord.
...more about the Cir-Kit Concepts Inc Glowing Embers