Model Trains

Features: Get accurate measurements of DCC, DC and AC volts and amps on your layout with these meters. Units are rated at 10 Amps and measure true RMS Volts/Amps, 2%. Compatible with all scales, adjustable contacts permit direct track voltage measurements; no batteries are needed for use with DCC systems. Use as a portable troubleshooting tool, or mount on control panel or fascia; rear screw terminals allow for easy connection to layout wiring.
...more about the DCC Specialties RRampmeter - Digital Meter for DCC, DC & AC Volts & Amps -- Version III - Enclosed w/Clip Leads & Battery Backup for Low Voltage

Features: This unit provides cost-effective occupancy detection for four sections. Unit features outputs for panel-mounted LEDs (sold separately) to display occupancy. It will detect any powered loco, and unpowered rolling stock equipped with resistor wheelsets. Requires DS54 or SE8C, both sold separately, to transmit occupancy information to the LocoNet System.
...more about the Digitrax Quad Occupancy Detector -- 4 Detection Sections, Outputs For Panel Mounted LEDs, For Use w/DS54 or SE8C

Features: Cost-effective occupancy detection for 16 detection sections. Add one or two RX4 Transponder Receivers (sold separately) and you can have Transponding in 8 zones. This means that youll know when a detection section is occupied and the unique ID of all transponders in that section. Ops Mode Read Back lets you read back CV Values on any section of track that is set up for transponding with BDL168 and one or more RX4s. Unit also includes outputs for panel-mounted LEDs to display local occupancy and power zone status. Detects any powered loco, and unpowered rolling stock equipped with resistor wheelsets. Simply connect to LocoNet to transmit occupancy information to
...more about the Digitrax LocoNet Occupancy Detector -- For 16 Detection Sections

Features: 3 Pack Edge Connector for use with PM4 Series Boards, BDL16 Series Boards and SE8 Series Boards.
...more about the Digitrax Connectors -- 44-Position Card-Edge Connector pkg(3)

Features: Use to expand your Digitrax or other DCC systems. Additional units provide more power to run more trains, automate reverse loops and simplify electronic isolation of portions of your layout so a short circuit stops only one area. Automatically shuts down if command-control drive signal is lost; layout will not convert to DC operation if a cable or connection is broken so train won't "take off" if they suddenly loose the DCC signal. Accepts 50/60Hz AC or DC from your current transformer, minimum input 12V AC or DC. Maximum input 22V AC or 28V DC. Auto reset for overheating and short circuit protection, with unique "smart" protection that won't weld derailed locos
...more about the Digitrax Power Management Equipment -- Smart Booster w/Intelligent Autoreverse 8 Amp

Features: Operates as the command station (generates DCC packets that tell decoders what to do) and main system booster (receives the DCC signal from the Command Station, amplifies it and puts it on the track as the power that runs the locos) on a Digitrax LocoNet system, and accepts input from any Digitrax throttle, sold separately. Can also be used in conjunction with your computer, if desired.
...more about the Digitrax Power Management Equipment - Command Station/Booster -- 5 Amp

Features: Make Your Locos Run Like the Real Thing 1.5 amp decoder features Digitrax LocoMotion™ System, two standard FX functions and installation interface options. Also has two and four digit addressing, three step and advanced speed tables, advanced consisting, supersonic motor drive for silent motor operation and more. The easy-connect nine-pin plug makes installation quick and easy.
...more about the Digitrax Mobile Decoder -- 9-Pin Easy Connect Interface .66 x 1.2 x .25'' 2FX 1.5 Amps - HO-Scale

Features: * 6 FX3 functions, .5A. * Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. * Accepts Plug-in SFX SoundBug sound modules. * Regulated headlights; no resistors are required for installation of LEDs or lamps. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Three-step speed tables set start, mid and max voltage for custom control. * 28-step speed tables with 256 level
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- For Atlas Diesels - HO-Scale

Features: * 6 FX3 functions, .5A. * Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. * Accepts Plug-in SFX SoundBug sound modules. * Regulated headlights; no resistors are required for installation of LEDs or lamps. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Three-step speed tables set start, mid and max voltage for custom control. * 28-step speed tables with 256 level
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- Integrated Medium 8-Pin DCC Plug - HO-Scale

Features: * 6 FX3 functions, .5A. * Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. * Accepts Plug-in SFX SoundBug sound modules. * Regulated headlights; no resistors are required for installation of LEDs or lamps. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Three-step speed tables set start, mid and max voltage for custom control. * 28-step speed tables with 256 level
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- For Kato - HO-Scale

Features: * 6 FX3 functions, .5A. * Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. * Accepts Plug-in SFX SoundBug sound modules. * Regulated headlights; no resistors are required for installation of LEDs or lamps. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Three-step speed tables set start, mid and max voltage for custom control. * 28-step speed tables with 256 level
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- For Kato SD40-2 - HO-Scale

Features: * 6 FX3 functions, .5A. * Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. * Accepts Plug-in SFX SoundBug sound modules. * Regulated headlights; no resistors are required for installation of LEDs or lamps. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Three-step speed tables set start, mid and max voltage for custom control. * 28-step speed tables with 256 level
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- Fits Sound-Equipped PROTO 2000(TM), Atlas, Intermountain & Other Locomotives - HO-Scale

Features: * This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions at .5A. * Supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Switching speed feature for easier and faster access to yard speeds. * Three-step speed tables set start, mid and max voltage for custom control. * 28-step speed tables with 256 level resolution for precise control. * SuperSonic(TM) motor drive for silent operation. * FX3 function outputs for prototypical lighting effects. * Constant brigh
...more about the Digitrax Plug N' Play Decoders -- Fr Kato NW2 - 1.0/1.5 Amp 2 FX3 Functions Rated At 1/2 Amp, Golden White LEDs - N-Scale

Features: Integrated medium 8-pin plug is ideal for installation in N loco tenders and on many HO models with an 8-pin socket. Decoder is rated at 1.0/1.5 Amp; 4 FX3 functions rated at .5 Amp.
...more about the Digitrax Plug N' Play DCC Decoder -- With Integrated 8 Pin Medium Plug - N-Scale

Features: These premium Digitrax N Scale Plug-N-Play decoders are made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, transponding and much more. Decoders are also equipped for full FX3 features with six functions available and more ways to make your lighting realistic. Units may also be adapted to fit other N Scale
...more about the Digitrax Plug N' Play Decoders -- For Kato RDC - Series 3 Decoder, Now Includes Board f/Interior Lighting - N-Scale

Features: These premium Digitrax decoders are rated at 1.0 amp for HO operation (sized to fit most N Scale locos too). Decoders are equipped for the Digitrax LocoMotion System with Scaleable Speed Stabilization, full FX3 features with six functions available, and transponding. Decoder measures .36 x .95 x .15" 9.1 x 24.1 x 3.8mm.
...more about the Digitrax Mobile Decoder -- With 12'' Leads for Wired Installation - N-Scale

Features: * Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. * This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions, .5A. * Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Switching speed feature for
...more about the Digitrax Plug N'Play DCC Decoder -- For Atlas GP40-2, U25B - N-Scale

Features: These premium Digitrax N Scale Plug-N-Play decoders are made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, transponding and much more. Decoders are also equipped for full FX3 features with six functions available and more ways to make your lighting realistic. Units may also be adapted to fit other N Scale
...more about the Digitrax Plug N'Play DCC Decoder -- For Atlas SD50, SD60, SD60M - N-Scale

Features: * Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. * This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions, .5A. * Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Switching speed feature for
...more about the Digitrax Plug N'Play DCC Decoder -- For Atlas GP30 (Sold Seperately) - N-Scale

Features: * Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. * This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions, .5A. * Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. * Other features include. * Torque compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Switching speed feature for
...more about the Digitrax Plug N'Play DCC Decoder -- For Intermountain SD40T-2 Tunnel Motor - N-Scale

Features: These premium Digitrax N Scale Plug-N-Play decoders are made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, transponding and much more. Decoders are also equipped for full FX3 features with six functions available and more ways to make your lighting realistic. Units may also be adapted to fit other N Scale
...more about the Digitrax Plug N' Play DCC Decoder -- For Kato F3 A&B - N-Scale

Features: These premium Digitrax N Scale Plug-N-Play decoders are made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, transponding and much more. Decoders are also equipped for full FX3 features with six functions available and more ways to make your lighting realistic. Units may also be adapted to fit other N Scale
...more about the Digitrax Plug N' Play DCC Decoder -- For Kato F40PH (Sold Seperately) - N-Scale