Features: These premium Digitrax N Scale Plug-N-Play decoders are made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, transponding and much more. Decoders are also equipped for full FX3 features with six functions available and more ways to make your lighting realistic. Units may also be adapted to fit other N Scale
...more about the Digitrax Plug N' Play DCC Decoder -- For Kato F3 A&B - N-Scale
|
Features: These premium Digitrax N Scale Plug-N-Play decoders are made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, transponding and much more. Decoders are also equipped for full FX3 features with six functions available and more ways to make your lighting realistic. Units may also be adapted to fit other N Scale
...more about the Digitrax Plug N' Play DCC Decoder -- For Kato F40PH (Sold Seperately) - N-Scale
|
Features: These premium Digitrax N Scale Plug-N-Play decoders are made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, transponding and much more. Decoders are also equipped for full FX3 features with six functions available and more ways to make your lighting realistic. Units may also be adapted to fit other N Scale
...more about the Digitrax Plug N' Play DCC Decoder -- For Kato SD40-2 - 2006+ Production - N-Scale
|
Features: These premium Digitrax N Scale Plug-N-Play decoders are made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, transponding and much more. Decoders are also equipped for full FX3 features with six functions available and more ways to make your lighting realistic. Units may also be adapted to fit other N Scale
...more about the Digitrax Plug N'Play DCC Decoder -- For Micro Trains FT w/FX3 Features & White LEDs - N-Scale
|
Features: These premium Digitrax decoders are rated at 1.0 amp for HO operation (sized to fit most N Scale locos too). Decoders are equipped for the Digitrax LocoMotion System with Scaleable Speed Stabilization, full FX3 features with six functions available, and transponding. Decoder measures .36 x .95 x .15" 9.1 x 24.1 x 3.8mm.
...more about the Digitrax Mobile Decoder -- With 8-Pin Medium Plug - N-Scale
|
|
|
|
|
Features: Allows you to install and operate up to four turnouts directly through any DCC system that has turnout control. Works with solenoid turnout machines and slow motion motors. Other features include easy installation, LocoNet compatible, integral capacitor discharge, power from track or separate booster and buffered switch inputs. DCC compatible.
...more about the Digitrax Stationary Decoder -- 4 Output - HO-Scale
|
|
Features: * These hand-held controllers feature dual click encodes to make using Digitrax products easier. Other features include a full numeric keypad and multi-line, backlit LCD display. * Full numeric keypad, single-key controls for function control, MU operations, programming, editing and more. Controls functions 0-12.
...more about the Digitrax Wireless Super Throttles -- With Radio
|
Features: * All Digitrax decoders are rated for at least 1 amp for robust operation and long-term reliability. Available in a variety of shapes and sizes to fit in almost any locomotive, Digitrax offers both traditional wired decoders as well as plug n play decoders that make installation a snap. Visit Digitrax on the internet to determine which Digitrax decoder fits in your loco! * Digitrax decoders feature variable frequency Supersonic(TM) motor drive for quiet motor operation. They support all DCC standard programming methods. One-step decoder factory reset makes it easy to troubleshoot decoders. Motor isolation protection protects your investment in locos and decoders.
...more about the Digitrax Mobile DCC Decoders -- Wired, 1.0 Amp, 2 Function, NO Back EMF
|
Features: * This tiny decoder measures only .418 x .340 x .112" 10.6 x 8.7 x 2.86mm and has a current rating of 1.0A. It features two 500mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Designed for Z Scale applications but is also great for many N and HO scale locos where space is limited. * Other features include. * Torque Compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Switching speed feature for easier and faster access to yard speeds. * Three-step speed tables set start, mid and max voltage for custom control. * 28-step speed tables with
...more about the Digitrax Mobile DCC Decoders -- Wired, 1.0 Amp, 2 Function, Back EMF, Soundbug Compatible - Z-Scale
|
Features: * This tiny decoder measures only .418 x .340 x .112" 10.6 x 8.7 x 2.86mm and has a current rating of 1.0A. It features two 500mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Designed for Z Scale applications but is also great for many N and HO scale locos where space is limited. * Other features include. * Torque Compensation for smooth, silent operation. * Momentum with acceleration and deceleration. * User selectable normal direction of travel. * Switching speed feature for easier and faster access to yard speeds. * Three-step speed tables set start, mid and max voltage for custom control. * 28-step speed tables with
...more about the Digitrax Mobile DCC Decoders - Tiny -- With 8 Pin Plug, 1.0 Amp, 2 Function, Soundbug Compatible - Z-Scale
|
Features: * All Digitrax decoders are rated for at least 1 amp for robust operation and long-term reliability. Available in a variety of shapes and sizes to fit in almost any locomotive, Digitrax offers both traditional wired decoders as well as plug n play decoders that make installation a snap. Visit Digitrax on the internet to determine which Digitrax decoder fits in your loco! * Digitrax decoders feature variable frequency Supersonic(TM) motor drive for quiet motor operation. They support all DCC standard programming methods. One-step decoder factory reset makes it easy to troubleshoot decoders. Motor isolation protection protects your investment in locos and decoders.
...more about the Digitrax Mobile Decoders -- 4 Function, Scaleable Speed Stabilization, Transponding
|
Features: * Add the next dimension to your operations with these mobile sound decoders! * Features include. * Easy Installation. * Rated at One Amp - For use in All Scales. * Programmable on any DCC Programming Track - No Special Equipment Needed. * SoundFX decoders feature: * 28mm Plug-In Speaker. * Available for Steam, Diesel or Electric Locos. * Downloadable Sound. * Over 12 Unique Controllable Sounds. * Supports Playable Whistle. * This stand-alone, four function decoder is also the perfect complement to the SDH104K1 SoundFX and LocoMotion Decoder (sold separately). Four functions with selectable outputs. Separating the light function decoder from the sound and motor c
...more about the Digitrax Mobile Decoders -- 4 Function w/Selectable Outputs (No Sound) - HO-Scale
|
Features: * Isolates segments of your LocoNet layout. * Protects segments of your LocoNet layouts. * Extends large LocoNet installations of more than 20 devices. * Acts as a diagniostic tool if LocoNet network problems occur. * FCC Part 15, Class B RFI compliant. * If a wiring or signal problems occur on any standard LocoNet section that the LNRP is connecting and monitoring, the LNRP will act to internally disconnect the faulty segment so that the protected LocoNet can continue operating. If the fault is removed, the LNRP will typically automatically reconnect and resume operations on the standard LocoNet segment.
...more about the Digitrax LocoNet Repeater -- Requires PS12 Power Supply (Sold Separately)
|
Features: Designed to let a computer with an IBM compatible COM, or RS232 communications port, monitor Digitrax LocoNet. Application software running in the computer can the interpret the activity on the LocoNet and report via a monitor. The MS100 is a signal level translator between LocoNet and a 25 pin DB25 style RS232 port. For example, a Railroad CTC type panel displaying a "schematic" layout of the railroad can be set up to respond to software messages received via LocoNet to indicate block occupancy, signal indication and other information received from detection devices attached to LocoNet. For IBM compatibles with 9 pin male DB9 type COM port connector.
...more about the Digitrax Computer Interfaces -- For Computer w/IBM Compatible COM or RS232 Communications Port
|
Features: * Get the benefits of sectioning your layout and auto reversing without additional boosters. PM42 has 4 levels of short circuit detection sensitivity settings so you can use it with a wide range of DCC equipment. * The PM42 lets you divide the output of a single booster into four sections for auto reversing, or to isolate areas of your layout so only an affected area shuts down if a short circuit occurs. Each unit can run four sections from a single booster, in any combination of regular sections and auto reversing sections.
...more about the Digitrax Quad Section Power Manager w/Auto Reversing
|
Features: Regulated power supply delivers more power with less heat for more efficient booster operation. Operate up to four five-amp boosters with the PS2012 supply. Scale selectable for use with N, HO or large scale. DC Ammeter. On/Off Switch. Integral cooling fan. Design coordinated for use with Digitrax products.
...more about the Digitrax Power Supplies -- 20 Amp for Digital Command Control
|
|
|
Features: * For use with Block Occupancy Detector #245-BDL16, sold separately. * Transponder receivers are the track level component that you use to set up the track sections where you want transponding to be active. You wont need to equip every track section to have adequate coverage in most cases. Visit the Digitrax Web site at www.digitrax.com for some ideas on equipping your layout with transponding.
...more about the Digitrax Block Transponding Receivers -- 4 Block Unit
|
Features: * Designed for the needs of any size home or club layout where operations are the key, the Super Chief Starter Set has more features than any other DCC set on the market. Large system command station has capacity for handling up to 120 addresses with up to 120 operators at a time. Super Chief gives you access to all Digitrax LocoMotion System and FX3 System features including four digit addressing, 128-step speed control, consist control, programming "on the fly," turnout control, adjustable network synchronized fast clock, and much, much more. Your Super Chief has a separate programming output that allows for read back of programming information. * Super Chief s
...more about the Digitrax Super Chief Premium Digitrax Command Control Starter Sets -- Radio Equipped Super Chief Premium Set (5 Amp) w/DT400R, DCS100 & UR91
|
Features: Ideal for home or club use. Set includes DT402 Super LocoNet Throttle (infra-ready), DCS100 Command Station/Booster with Intelligent AutoReverse, UP5 Universal Panel, LT1 Test Kit and instruction manuals.
...more about the Digitrax Super Chief Xtra Start Set
|
Features: * The Digitrax Plug 'N Play Signal system is the perfect way to add signaling to your layout. And whether you use DC or DCC controls, it will add a new dimension of realism to operations. * The SE8C Signal Decoder is the heart of the system, and can drive up to 32 signal heads using most popular signal types like bi-color LED searchlight types with two or three leads, or 3-LED heads with common anode or cathode. * It can even drive B&O or Pennsy type heads with multiple indicators. * Current resistors are built-in for setting LED brightness. The SE8C can also be used to drive 8 slow-motion turnout machines, such as Circuitron's. * Tortoise or eight semaphore sign
...more about the Digitrax Plug'N Play Signaling Accessory Products -- Signal Driver Cable Kit - HO-Scale
|
Features: Digitrax Plug 'N Play Mobile Decoders with SoundFX control locomotive motor and sound functions. The 1 Amp decoder has all the LocoMotion features you expect from SoundFX too! Based on proven locomotive decoder technology, the decoder has preloaded sounds and can also handle downloadable sound. Supports the playable whistle feature with F2 key on DT400 throttles. Includes 28mm speaker. For complete control including lighting functions, use the FN04K1 Function Decoder with the SDH104 series decoder, or purchase the Combo Pack that includes the SoundFX decoder, 28mm speaker and FN401K1 lighting function decoder.
...more about the Digitrax Mobile Decoders -- SDH104K1A (SoundFX & LocoMotion) For Kato AC4400 - 1 Amp w/28mm Speaker - HO-Scale
|
|
|
Features: Digitrax Plug 'N Play Mobile Decoders with SoundFX control locomotive motor and sound functions. The 1 Amp decoder has all the LocoMotion features you expect from SoundFX too! Based on proven locomotive decoder technology, the decoder has preloaded sounds and can also handle downloadable sound. Supports the playable whistle feature with F2 key on DT400 throttles. Includes 28mm speaker. For complete control including lighting functions, use the FN04K1 Function Decoder with the SDH104 series decoder, or purchase the Combo Pack that includes the SoundFX decoder, 28mm speaker and FN401K1 lighting function decoder.
...more about the Digitrax Mobile Decoders -- SDH104K1B (SoundFX & LocoMotion) For Kato SD38 - 1 amp w/28mm Speaker - HO-Scale
|
Features: Digitrax Plug 'N Play Mobile Decoders with SoundFX control locomotive motor and sound functions. The 1 Amp decoder has all the LocoMotion features you expect from SoundFX too! Based on proven locomotive decoder technology, the decoder has preloaded sounds and can also handle downloadable sound. Supports the playable whistle feature with F2 key on DT400 throttles. Includes 28mm speaker. For complete control including lighting functions, use the FN04K1 Function Decoder with the SDH104 series decoder, or purchase the Combo Pack that includes the SoundFX decoder, 28mm speaker and FN401K1 lighting function decoder.
...more about the Digitrax Mobile Decoders -- SDH104K1C (SoundFX & LocoMotion) For Kato F40PH - 1 Amp w/28mm Speaker - HO-Scale
|
Features: * The Digitrax Plug 'N Play Signal system is the perfect way to add signaling to your layout. And whether you use DC or DCC controls, it will add a new dimension of realism to operations. * The SE8C Signal Decoder is the heart of the system, and can drive up to 32 signal heads using most popular signal types like bi-color LED searchlight types with two or three leads, or 3-LED heads with common anode or cathode. It can even drive B&O or Pennsy type heads with multiple indicators. Current resistors are built-in for setting LED brightness. The SE8C can also be used to drive 8 slow-motion turnout machines, such as Circuitron's Tortoise or eight semaphore signals dri
...more about the Digitrax Plug'N Play Signaling Accessory Products -- Signal Decoder - Drives Up To 32 Signal Heads w/Popular LED Signal Types
|
