Model Trains

Features: Snap-In Sound Decoder for N Scale F Units This MRC Brilliance™ snap-in sound decoder features a board-mounted super-fidelity speaker. It provides realistic diesel engine sound, plus all 28 available NMRA functions, and your choice of multiple bells and numerous horns. Easily installed, it is designed to replace the factory light board in your Kato N-Scale DCC-ready EMD F3 loco.
...more about the MRC Digital Command Control (DCC) Decoders w/Sound - Snap-In -- Fits Kato F Unit Diesels (Sold Seperately) - N-Scale

Features: Each supports two or four-digit addressing, advanced consisting, accessory functions, programming on the main and 14, 28-128 speed steps. Each includes speaker.
...more about the MRC Digital Command Control (DCC) Decoder w/Sound -- Fits Atlas S2 & S4 Locomotive (Sold Seperately) - HO-Scale

Features: Affordable Sound for DC & DCC Layouts Upgrade your PROTO 1000(TM) GP15-1 to sound and/or DCC operation in minutes with this drop in decoder. The unit is fully assembled and ready to install, and features sounds taken from an actual GP15. All sound functions can be operated on DC layouts using the wireless remote that's included (remote requires one 23A 12V battery, sold separately).
...more about the MRC Drop-In Decoder w/Sound -- For PROTO 1000(TM) GP15-1 - HO-Scale

Features: Universal fit with NMRA plug. Four prime mover sounds: Alco 244, SD60, SD70 and EMD 567B. Multiple horns and bells. Speaker included.
...more about the MRC DCC Sound & Control Decoder -- Universal Diesel - ALCO, SD60, SD70, F - HO-Scale

Features: Replaces Life-Like board. Easy installation. Speaker included.
...more about the MRC Drop-In Sound Decoder -- For PROTO 2000 Alco PA/PB Diesel - HO-Scale

Features: Correct MP-15 prime mover sound. Easy installation, replaces Athearn board. Speaker included.
...more about the MRC DCC Sound & Control Decoder -- For Athearn MP15 - HO-Scale

Features: Power to run trains with the cab. Hand-held control with memory function-unplug the control and your train keeps moving. Delivers 57VA for HO/N Scale. Terminals for ammeter and voltmeter hookup, filtered and regulated DC output, momentum circuitry, nudge switch control and a mode switch. 5.0 amps plus reserve power.
...more about the MRC Control Master 20

Features: Maximum power for G Scale layouts, or HO Scale. Provides a total of 60VA output power, plus 0-18.5 volts DC track voltage. Includes AC output for accessories, HO & N or Large Scale mode switch, a 300 throttle control and a power monitor lamp. Delivers 2.2 amps of power to trains.
...more about the MRC Trainpower 6200 Power Pack -- 35va on Mode 1, 27va on Mode 2

Features: Ammeters and voltmeter let you monitor loco operation and identify problems before damage occurs. Advanced Proportional Tracking Control, momentum circuitry and braking and acceleration control make you feel like you're running a real locomotive. Available with 30VA of power, pack can run HO, N, G and other DC trains. Covered by a five-year warranty, comes with Throttle Master control knob, 300 of control, thermostat protection, AC terminals for accessories and much more.
...more about the MRC Tech 3 Power Command 9500 (30VA)

This is the AD321 G Gauge DCC Decoder from Model Rectifier Corporation. Features: * An advanced DCC locomotive decoder. * Designed for heavy-duty HO scale and light G scale. * Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses. * Programmable start voltage and top voltage. * Programmable acceleration rate and deceleration rate. * Programmable 14, 28, 128 speed steps. * Directional lighting control for front and rear lights at 0.2 amp rate. * 4 accessory functions (F0-F3, at 0.2 amp rate. * Supports advanced consisting (CV19), and programming on main. * Compatible with NMRA DCC standard. * Complies with the part 15 of the FCC. * Detailed installation instr
...more about the MRC Digital Command Control (DCC) Decoders - No Sound -- 3 Amp, 4 Digit Addressing, 128 Speed Steps - G-Scale

This is a Dispatcher Trackside Decoder from MRC. Features: Operates both twin-coil and slow-motion switch machine. Red and green indicator LEDs included. Good for operating accessory lighting. Uses mobile decoder addresses. Good for all types of DCC systems.
...more about the MRC Digital Command Control (DCC) Decoders - No Sound -- Dispatch Decoder For Original Prodigy System (Sold Seperately)

This is the Prodigy DCC Handheld Dispatcher from Model Rectifier Corp. Features: * Operate your turnouts, building lights, or any other accessories from anywhere around your layout to anywhere on your layout. * Throw multiple turnouts with one push of a button for a specific route and at the same time, you can still operate individual turnouts within your pre-programmed route. * Programming capability allows you to wire your turnout switch motor for normal direction operation and be programmed for "Reverse Polarity" for routing purposes so the turnout can be thrown opposite its normal operating direction when used within a route.
...more about the MRC DCC Accessories - Walkaround Throttles -- Prodigy Dispatcher

Add Realism to Your DCC Layout with the Synchro Sound 750 from Model Rectifier Corporation. Features: * High quality digital sound. * Program the Synchro Sound 750 to the locomotive's address. * Bring your DCC equipped reailroad to life with realistic model railroading sounds including. * -Bell. * -Coupling. * -Diesel rumble. * -Horn (long & short). * Realistic diesel rumble stays in sync with loco's speed. * The bell sound has a diesel idle sound in the background. When using the bell sound in conjunction with the diesel rumble sound, the synchronized diesel rumble sound will drop out and the diesel idle background sound will be heard while the bell is activated. * Special
...more about the MRC Digital Command Control Accessories -- Prodigy Synchro Sound Station - Diesel

This is the SLO Motion Switch Power Supply from Model Rectifier Corporation. Features: * For use with the Tortoise Slow Motion Switch Machine (MDPU6000). * 2-prong, electrical outlet plug-in. * Electronic overload protection at 500mA. * Able to drive an average of 15 slow motion switch motors. * Detailed wiring diagroms provided show how to wire the MRC SLO motion power supply AH362 with MRC AD360 dispatcher decoder (MRCU1360) or a switch to your train layout switch.
...more about the MRC Railroad Accessory Items -- Tortoise Switch Power Supply