Crest Model Trains

Designed for remote control of turnouts only. Operates up to five turnouts; additional units can be combined to control up to 50 .....
...more about the Crest DC Accessory Receiver -- 5 Switch

Operates up to five lights, turnouts or accessories; additional units can be combined to control up to 50 .....
...more about the Crest Train Engineer Accessory Receiver -- DC/R/C Wireless Receiver

For improved conductivity and engine performance, keep your track and wheels clean with Aristo-Craft Track Cleaner. It also doubles as smoke fluid, for the cleanest smoke around without the .....
...more about the Crest Crest Smoke Fluid & Track Cleaner -- 4oz

...more about the Crest Cermag -- Nominal Load-.080 RPM At No Load- 8600

...more about the Crest Cermag -- Nominal Load-.091 RPM At No Load-7600

...more about the Crest Cermag -- Nominal Load-2.10 RPM At No Load-11600

...more about the Crest Cermag -- Nominal Load-2.6 RPM At No Load-9200

Add extra conductivity and smooth operation to locomotives by adding to axle bearings and .....
...more about the Crest Crest Lube Conductive

...more about the Crest Crest Lube Oil 1.125oz

...more about the Crest Power Pack -- ProTech Ultra HO 15V 2 Amp Switching Power

...more about the Crest The Train Engineer DCC System -- DC/HO Receiver/Decoder (Single Unit) - HO-Scale

...more about the Crest The Train Engineer DCC System -- DC/HO Receiver/Decoder 6-Pack - HO-Scale

...more about the Crest The Train Engineer DCC System -- Wireless Remote Transmitter/Throttle

Works for both G and HO Scales. Supplies 22V DC at 13 amps for G Scale or 13.8V DC at 20 amps for HO .....
...more about the Crest Power Supply -- Switching D.C./22v DC,13Amp G Scale,13.8v DC,20 amps for HO scale

The Train Engineer walk-around wireless control system is ideally suited for backyard garden railroads and can be used for DC indoor/outdoor railroads of any size or gauge. No modification to the locomotive is required. It use a 27 MGHZ multidirectional FM signal with Pulse Code Modification (P.C.M.) that eliminates any outside signal interference. It operates off of your normal power pack; just connect the receiver unit into existing wiring between the track layout and .....
...more about the Crest Train Engineer Walk Around 2 Piece Set -- Includes #55471 Receiver & #55473 Transmitter/10 amp rating (2)

...more about the Crest Train Engineer Track Receiver

Additional transmitter for the original Train Engineer. 27 .....
...more about the Crest Train Engineer Transmitter

Simplified version of Train Engineer. A wireless radio control system for all DC electric trains. Includes one transmitter and one .....
...more about the Crest Basic Train Engineer -- 2 AMP 100'

...more about the Crest On Board Train Engineer - 75 MGHZ

...more about the Crest Battery 6V -- 3.2A Gel Type (3)

...more about the Crest Charger For Battery Pack -- 18V

Control up to five locomotive accessory functions with this add-on board for the #227-55490 On Board Receiver, sold .....
...more about the Crest Add-On Board To Accessory Functions -- For 5491

Increases airflow to keep interior components of Receiver (#227-55471; also included with #55470, both sold separately) .....
...more about the Crest Fan for 55471 -- Above 5 Amps

...more about the Crest Wire Set For Charging

Now you can see what your railroad looks like from the engineer's point of view! With a camera slightly larger than the diameter of a quarter and only 3/4'' deep, you can ride along with just about any loco. The camera broadcasts to the included receiver which is connected to a TV or VCR and you can watch all the action as if you were in the cab yourself. System includes camera, microphone enclosed within camera case, receiver, 9V battery connector, a 36'' two-wire A/V .....
...more about the Crest Video -- Train Remote View Camera System

Thus edition of the Train Engineer system eliminates the worry of clean track. Signal is transmitted via airwaves instead of through the track so it can run on battery or track power. Sound, all lighting functions and more can be operated from thehandheld transmitter. Control up to 999 trains and accessories with one transmitter and identify every locomotive by both description and roadnumber. Innovative throttle allows easy and accurate operation. A graphic display walks .....
...more about the Crest Train Engineer -- 2.4 GHZ

...more about the Crest Micro Switch -- Single