Digitrax Model Trains

...more about the Digitrax Accessories -- ACC-T1W - Warm White LEDs - 10-Pack

Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features .....
...more about the Digitrax Plug N' Play DCC Decoder -- Fits Intermountain FT-A Unit - N-Scale

Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features .....
...more about the Digitrax Plug N' Play DCC Decoder -- Fits Intermountain FT-B Unit - N-Scale

...more about the Digitrax Auto Reverser

This unit provides cost-effective occupancy detection for four sections. Unit features outputs for panel-mounted LEDs (sold separately) to display occupancy. It will detect any powered loco, and unpowered rolling stock equipped with resistor wheelsets. Requires DS54 or SE8C, both sold separately, to transmit occupancy information to the LocoNet .....
...more about the Digitrax Quad Occupancy Detector -- 4 Detection Sections, Outputs For Panel Mounted LEDs, For Use w/DS54 or SE8C

Cost-effective occupancy detection for 16 detection sections. Add one or two RX4 Transponder Receivers (sold separately) and you can have Transponding in 8 zones. This means that youll know when a detection section is occupied and the unique ID ofall transponders in that section. Ops Mode Read Back lets you read back CV Values on any section of track that is set up for transponding with BDL168 and one or more RX4s. Unit also includes outputs for panel-mounted LEDs to .....
...more about the Digitrax LocoNet Occupancy Detector -- For 16 Detection Sections

Edge connector for use with PM4 series, BDL16 series and SE8 series .....
...more about the Digitrax Connectors -- 44-Position Card-Edge Connector pkg(3)

Use to expand your Digitrax or other DCC systems. Additional units provide more power to run more trains, automate reverse loops and simplify electronic isolation of portions of your layout so a short circuit stops only one area. Automatically shuts down if command-control drive signal is lost; layout will not convert to DC operation if a cable or connection is broken so train won't ''take off'' if they suddenly loose the DCC signal. Accepts 50/60Hz AC or DC from your .....
...more about the Digitrax Power Management Equipment -- Smart Booster w/Intelligent Autoreverse 8 Amp

The same fine wire Digitrax uses on its N and Z Scale decoders. Great for installing extra lamps and other accessories in your .....
...more about the Digitrax Decoder Wire -- ACC-DECODERWIRE - 9-Conductor 30 AWG - 10' - HO-Scale

Operates as the command station (generates DCC packets that tell decoders what to do) and main system booster (receives the DCC signal from the Command Station, amplifies it and puts it on the track as the power that runs the locos) on a Digitrax LocoNet system, and accepts input from any Digitrax throttle, sold separately. Can also be used in conjunction with your computer, if .....
...more about the Digitrax Power Management Equipment - Command Station/Booster -- 5 Amp

...more about the Digitrax Large Scale & High Current Draw Wired Decoders -- 5 Amp, 8FX3, 1.45 x 2.23'' w/Screw Terminal - G-Scale

...more about the Digitrax Mobile Decoders -- 9 Pin Easy Connect Interface .63 x 1.1 x .22'' 2FX 1.5 Amps Athearn Plug N Play - HO-Scale

...more about the Digitrax Mobile Decoders -- 9-Pin Easy Connect Interface .66 x 1.2 x .25'' 2FX 1.5 Amps - HO-Scale

...more about the Digitrax Mobile Decoders -- 9 Pin Easy Connect Interface .63 x 1.1 x .22'' 2FX 1.5 Amps Long Wire Harness - HO-Scale

...more about the Digitrax Mobile Decoders -- 9 Pin Easy Connect Interface .63 x 1.1 x .22'' 2FX 1.5 Amps Short Wire Harness - HO-Scale

...more about the Digitrax Mobile Decoders -- 9 Pin Easy Connect Interface Athearn Plug N Play 1/2 Amp w/Torque Compensation - HO-Scale

...more about the Digitrax Mobile Decoders -- 9 Pin Interface, Transponding, Torque Compensation & Speed Stabilization

6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features include. QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. Accepts Plug-in SFX SoundBug sound modules. Regulated headlights; no resistors are required for installation of LEDs or lamps. Torque compensation for smooth, silent operation. Momentum with acceleration and .....
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- For Atlas Diesels - HO-Scale

6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features include. QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. Accepts Plug-in SFX SoundBug sound modules. Regulated headlights; no resistors are required for installation of LEDs or lamps. Torque compensation for smooth, silent operation. Momentum with acceleration and .....
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- Integrated Medium 8-Pin DCC Plug - HO-Scale

6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features include. QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. Accepts Plug-in SFX SoundBug sound modules. Regulated headlights; no resistors are required for installation of LEDs or lamps. Torque compensation for smooth, silent operation. Momentum with acceleration and .....
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- For Kato - HO-Scale

6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features include. QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. Accepts Plug-in SFX SoundBug sound modules. Regulated headlights; no resistors are required for installation of LEDs or lamps. Torque compensation for smooth, silent operation. Momentum with acceleration and .....
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- For Kato SD40-2 - HO-Scale

6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features include. QSI-style PCB replacement Plug N'Play decoder - allows replacement with downloadable SFX SoundBug(TM) modules. Accepts Plug-in SFX SoundBug sound modules. Regulated headlights; no resistors are required for installation of LEDs or lamps. Torque compensation for smooth, silent operation. Momentum with acceleration and .....
...more about the Digitrax Plug N' Play Decoder w/SoundBug(TM) Socket -- Fits Sound-Equipped PROTO 2000(TM), Atlas, Intermountain & Other Locomotives - HO-Scale

This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions at.5A. Supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features include. Torque compensation for smooth, silent operation. Momentum with acceleration and deceleration. User selectable normal direction of travel. Switching speed feature for easier and faster access to yard speeds. Three-step speed tables set start, mid and max voltage for custom control. 28-step speed .....
...more about the Digitrax Plug N' Play Decoders -- Fr Kato NW2 - 1.0/1.5 Amp 2 FX3 Functions Rated At 1/2 Amp, Golden White LEDs - N-Scale

Integrated medium 8-pin plug is ideal for installation in N loco tenders and on many HO models with an 8-pin socket. Decoder is rated at 1.0/1.5 Amp; 4 FX3 functions rated at.5 .....
...more about the Digitrax Plug N' Play DCC Decoder -- With Integrated 8 Pin Medium Plug - N-Scale

This premium Digitrax N Scale Plug-N'Play decoder is made to fit specific locomotives so you dont have to do any soldering or frame modifications, just a simple replacement of the factory-installed light board. Decoders are rated at 1.0 amp for reliable operation. All have the Digitrax LocoMotionTM System with momentum, simple three-step speed tables, high resolution 28-step speed tables, simplified scaleable speed stabilization, SuperSonicTM, torque compensation, .....
...more about the Digitrax Plug N' Play Decoders -- For Kato RDC - Series 3 Decoder, Now Includes Board f/Interior Lighting - N-Scale

This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions at.5A. Supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features include. Torque compensation for smooth, silent operation. Momentum with acceleration and deceleration. User selectable normal direction of travel. Switching speed feature for easier and faster access to yard speeds. Three-step speed tables set start, mid and max voltage for custom control. 28-step speed .....
...more about the Digitrax Mobile Decoder -- With 12'' Leads for Wired Installation - N-Scale

Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features .....
...more about the Digitrax Plug N'Play DCC Decoder -- For Atlas GP40-2, U25B - N-Scale

Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features .....
...more about the Digitrax Plug N'Play DCC Decoder -- For Atlas SD50, SD60, SD60M - N-Scale

Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features .....
...more about the Digitrax Plug N'Play DCC Decoder -- For Atlas GP30 (Sold Seperately) - N-Scale

Plug N'Play decoders are designed as drop-in replacements for the existing light board in the indicated locomotives. Decoders include golden-white LEDs that simulate the hue of real headlights. Installation is straightforward following the manufacturer's instructions. This 6 function decoder is rated at 1.5A (2A peak) and has 6 FX3 functions,.5A. Decoder features two 6.5mA function outputs, supports Digitrax FX3 functions and 14, 28 or 128-step speed control. Other features .....
...more about the Digitrax Plug N'Play DCC Decoder -- For Intermountan SD40T-2 Tunnel Motor - N-Scale