|
|
Model Trains → Lighting / Electrical → Electrical Accy
|
Features: The ECoS Command Stations extensive features include two cabs with motorized throttle knobs, eight function keys each and a two-axis, center-click joystick each. The large, white, background-illuminated LCD shows all informaiton in plain words. Each ECoS command station integrates a four-Amp steady-output booster and is supplied with a 90VA power supply.
...more about the LokSound By ESU ECoS Central Unit Digital Command Station
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features: * Makes sure decoders work properly before installation in locos with this handy tool. Unit includes a six-wire NEM 651 harness and an eight-wire NEM 652 interface, along with a 21-pin mtc interface; decoders without plugs can be connected using alligator clips (not included). * A high quality, 5 pole skewed armature can motor with flywheel lets you check motor output and test slow and constant speed characteristics of your decoder. An LED-monitor shows the function of the head- and rear lights, as well as function outputs AUX 1 (green), and AUX 2 (violet). A 20 mm speaker is included for testing sound decoders. * A screw terminal assures safe connection between
...more about the LokSound By ESU Decoder Tester
|
Features: For modelers using DCC without sound, the LokPilot provides a versatile decoder thats ideal for most motive power. Each unit automatically detects if used on DC or DCC systems. On DCC, the decoder will determine the number of speed steps and you can select any address up to 9999. A programmable speed curve allows precise adjustment. Function mapping can be assigned to any of 12 buttons in any combination, The units also support a wide range of lighting effects including Mars lights, ditch lights, Gyra-Lights, strobes and more, and lamp brightness is adjustable. Dynamic Drive Control (back EMF) improves low speed performance. Overload protection is provided for mo
...more about the LokSound By ESU LokPilot V3.0 Standard Decoder (No Sound) -- NMRA 8-Pin Plug - HO-Scale
|
Features: Enjoy your LokSound equipped engines even more by adding or changing sounds and fine-tuning performance using this unit with your home computer. Easy to use with no prior knowledge of programming needed, the unit can be used with any PC with an audio card and a Windows operating system. Just connect the programmer to your PC using the serial port or the USB adapter (included). Start the software then place a loco with a LokSound decoder on your programming track. The software automatically detects which type of decoder is installed and provides specific information; easy to follow on-screen graphics let you change loco address, speed steps, acceleration and decel
...more about the LokSound By ESU LokSound Programmer -- With Power Supply, Serial Cable, USB Adapter, Manual & CD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features: * Breathe new life into your roster with these decoders combining a full range of DCC operation with a programmable sound module and speakers. Sounds from a variety of actual steam, diesel and electric locos are available. With the LokSound Programmer #397-53452 (sold separately) you can easily program your locos for maximum performance and add additional sounds using your home computer. A large 8 MBit memory allows for a wide range of complex sounds - up to 15 different sounds can be activated using your DCC function buttons. Four sound channels allow for realistic mixing and playback, with up to three sounds running simultaneously with the exhaust. Load-depende
...more about the LokSound By ESU LokSound V3.5 Decoder - Diesel Baldwin VO -- 6 Cylinder, Without Turbo Charger, 1 Chime Airhorn - HO-Scale
|
|
|
|
|
|
|
|
|
|
|
|
