Ram-Track Model Trains

Features: Motion-sensing infra-red system eliminates the need for magnets and minimal lighting. Can handle switching device up to 1/2 amp. 5-24V DC.
...more about the Ram Track Control & Power Devices -- Infra Red Switch - 1/2 amp, 5-24V DC

Features: A small photo cell senses a passing train and switching devices up to 1/2 amp.
...more about the Ram Track Control & Power Devices -- Light Activated Switch - 1/2 amp, 5-24V DC

Features: * One-inch reed switch is triggered by a high-power, rare-earth magnet. * Attached to one foot of wire.
...more about the Ram Track Control & Power Devices -- Reed Switch & Magnets (2 Sets)

Features: Responds to random onboard motion. Mounted in rolling stock to randomly trigger devices.
...more about the Ram Track Control & Power Devices -- Tilt Switch (responds to random on board motion)

Features: Two small photo cells sense a passing train and switch devices up to 1/2 amp. Perfect for activating a crossing signal.
...more about the Ram Track Control & Power Devices -- Dual Sensor Light Activated Switch - (2) 1/2 amp outputs, 5-24V DC

Features: Ligjts can stay bright even if there is no power coming from railroad pick-ups. Four-bulb systems includes two nicad cells with circuitry for track/off-track charging.
...more about the Ram Track Lighting Systems -- Constant Railroad Interior Lights

Features: Includes a 5/8 x 2-1/2" circuit board which operates from 5-24V. Includes two clear lenses, one 3/16" and one 1/4". Works on HO to G Scales.
...more about the Ram Track Lighting Systems -- Oscillating Beacon/Headlight - Single Bulb for HO to G, 4-24v DC Trackpower

Features: Equipped with a 3mm bright white LED, this unit produces a very realistic computer-controlled flash. Great detail for factories, garages, track repair scenes and more.
...more about the Ram Track Arc Welder

Features: Four mini bulbs provide uniform car interior lighting from standard track voltage.
...more about the Ram Track Incandescent Lighting -- DCC Interior Lights

Features: Includes a 5/8 x 2-1/2" circuit board which operates from 5-24V. Includes two clear lenses, one 3/16" and one 1/4", and has two mini nicad cells with circuitry for track/off track charging. Works on HO to G Scales.
...more about the Ram Track Incandescent Lighting -- Constant Oscilating Beacon/Headlight

Features: * This driver makes it easy to power any two-color signal (sold separately). * Unit will automatically turn on up to two bulbs or LEDs (up to 100ma) and is triggered by a photocell. In operation, the shadow of a passing train turns off the green light and turns on the red. Once the train passes, the signal can be set to stay red from two to 30 seconds, using the built-in adjustment on the circuit board. Fully assembled, the driver also includes an adjustable light sensor, resistors for use with LED signals, instructions, and a basic wiring diagram.
...more about the Ram Track Control & Power Devices -- Signal Driver w/Train Detector

Features: An ultra-bright 1/8" 3mm LED provides the softer incandescent glow of a steam loco headlight. Includes 12" 30cm of high quality #30 flexible wire connected to 5/16 x 5/8 x 1" circuit board. System is complete and ready to install. Includes 3/16 and 1/4" clear plastic lenses to accommodate most headlight openings.
...more about the Ram Track Steam Era Headlight -- Low Voltage w/1 Soft White 3mm LED

Features: Specifically designed ot give prototypical alternate flash or steady light operation. Activated by track magnets. Simple hookup of circuit to Ram Track 616-118 or 128 Ditch Lights (both sold separately) but can also be adapted to other units. Measures 3/4 x 2".
...more about the Ram Track Ditch Light Controller -- Magnet Operated

Features: Add the sound of an old-fashioned car horn to your rail cars. Complete system includes a reed switch triggered by a magnet on the roadbed.
...more about the Ram Track Digital Sound Devices - Trackside -- A Hooga Horn