Model Trains

One-inch reed switch is triggered by a high-power, rare-earth magnet. Attached to one foot of
...more about the Ram Track Control & Power Devices -- Reed Switch & Magnets (2 Sets)

Responds to random onboard motion. Mounted in rolling stock to randomly trigger
...more about the Ram Track Control & Power Devices -- Tilt Switch (responds to random on board motion)

Two small photo cells sense a passing train and switch devices up to 1/2 amp. Perfect for activating a crossing
...more about the Ram Track Control & Power Devices -- Dual Sensor Light Activated Switch - (2) 1/2 amp outputs, 5-24V DC

Ligjts can stay bright even if there is no power coming from railroad pick-ups. Four-bulb systems includes two nicad cells with circuitry for track/off-track
...more about the Ram Track Lighting Systems -- Constant Railroad Interior Lights

Includes a 5/8 x 2-1/2'' circuit board which operates from 5-24V. Includes two clear lenses, one 3/16'' and one 1/4''. Works on HO to G
...more about the Ram Track Lighting Systems -- Oscillating Beacon/Headlight - Single Bulb for HO to G, 4-24v DC Trackpower

The single 3mm Ultra-Brite white LED of this system is powered by three mini N Nicad cells with a 1/2 x 2'' circuit board for track or off-track charging. The headlight stays prototypically lit even when there is no power from the track. Includes 3 /16'' and 1/4'' clear
...more about the Ram Track Constant Headlight -- Single 3mm Ultra Bright White LED

Equipped with a 3mm bright white LED, this unit produces a very realistic computer-controlled flash. Great detail for factories, garages, track repair scenes and
...more about the Ram Track Arc Welder

Four mini bulbs provide uniform car interior lighting from standard track
...more about the Ram Track Incandescent Lighting -- DCC Interior Lights

Includes a 5/8 x 2-1/2'' circuit board which operates from 5-24V. Includes two clear lenses, one 3/16'' and one 1/4'', and has two mini nicad cells with circuitry for track/off track charging. Works on HO to G
...more about the Ram Track Incandescent Lighting -- Constant Oscilating Beacon/Headlight

This driver makes it easy to power any two-color signal (sold separately). Unit will automatically turn on up to two bulbs or LEDs (up to 100ma) and is triggered by a photocell. In operation, the shadow of a passing train turns off the green light and turns on the red. Once the train passes, the signal can be set to stay red from two to 30 seconds, using the built-in adjustment on the circuit board. Fully assembled, the driver also includes an adjustable light sensor,
...more about the Ram Track Control & Power Devices -- Signal Driver w/Train Detector

An ultra-bright 1/8'' 3mm LED provides the softer incandescent glow of a steam loco headlight. Includes 12'' 30cm of high quality #30 flexible wire connected to 5/16 x 5/8 x 1'' circuit board. System is complete and ready to install. Includes 3/16 and 1/4'' clear plastic lenses to accommodate most headlight
...more about the Ram Track Steam Era Headlight -- Low Voltage w/1 Soft White 3mm LED

An ultra-bright 1/8'' 3mm LED provides the softer incandescent glow of a steam loco headlight. Includes 12'' 30cm of high quality #30 flexible wire connected to 5/16 x 5/8 x 1'' circuit board. System is complete and ready to install. Includes 3/16 and 1/4'' clear plastic lenses to accommodate most headlight
...more about the Ram Track Steam Era Headlight -- 24 Volt w/1 Soft White 3mm LED

This on-board switch is activated by magnets to control the action of any on-board feature. Track powered, the 3/4 x 3'' circuit has a DPDT relay capable of controlling up to three amps in a variety of
...more about the Ram Track Latching Switch -- On-Board, Track Powered

Specifically designed ot give prototypical alternate flash or steady light operation. Activated by track magnets. Simple hookup of circuit to Ram Track 616-118 or 128 Ditch Lights (both sold separately) but can also be adapted to other units. Measu res 3/4 x
...more about the Ram Track Ditch Light Controller -- Magnet Operated

Bring your rail car alive with sound synchronized to speed, adjustable idle and max RPM. Compact system is easy to install and the included 2'' speaker is easily replaced with a 1'' (sold separately). Powered by 9V
...more about the Ram Track Digital Sound Devices - Trackside -- Rail Car Engine, 2'' Speaker w/Amplifier Box

Add the sound of an old-fashioned car horn to your rail cars. Complete system includes a reed switch triggered by a magnet on the
...more about the Ram Track Digital Sound Devices - Trackside -- A Hooga Horn