Model Trains

Features: Contact load is 0.5A capacity, 3/4 x 1".
...more about the Brawa Modellspeilwaren Magnetic Reed Switch -- Inert Gas-Filled Tube Contact

Features: For use with #186-3530. 1/4 x 1/2" (6 x 12 x 4mm).
...more about the Brawa Modellspeilwaren Bar Magnet

Features: * Adjustable output clip. Reduces train speed for slow-running train blocks. * 0-100 ohms. 1/4 x 2".
...more about the Brawa Modellspeilwaren Adjustable Resistor

Features: Fully assembled sockets with wire leads and replaceable bulbs. Ideal for interior lighting in most structures.
...more about the Busch Gmbh Building Light w/Socket, Bulb -- 14-16V (2)

Features: Features a string of 12 yellow LEDs. A nice addition to campsites, restaurants or as Christmas lights.
...more about the Busch Gmbh Flexible Light Band w/12 Yellow Lights

Features: For manual control of signals with or without train control. The red/green LEDs indicate the present position of the signal.
...more about the Busch Gmbh Signal Switch -- 2 LED's (red & green)

Features: Activates sound and other accessories at random intervals. Includes hookup instructions. 12-16V.
...more about the Busch Gmbh Random Electronic Switching Unit

Features: Light and sound control unit with speaker and 2 bulbs.
...more about the Busch Gmbh Blue Blinker Set w/Sound

Features: Must be connected to 14-16V AC or DC power supply.
...more about the Busch Gmbh Electronic Flames

Features: This two-part device has one infrared sending unit and one receiver. Place them up to 4" 10cm apart (10" 25cm when used in conjunction with 189-5961 and 5963 timers). When a train interrupts the invisible infrared beam they transmit a signal which can be used to activate relays, timers and signal circuits. 3/4 x 3-5/8 x 3/4" 1.8 x 9 x 2cm.
...more about the Busch Gmbh Standard Infrared Light Switch Unit -- For Use With Items 5961 and 5963.

Features: White LEDs produce light approximating the glow of Xenon/Neon lamps. Great for replacing or adding headlights on locomotives, rolling stock, automobiles and building interiors.
...more about the Busch Gmbh Standard LEDs -- 14-16v (2)

Features: * Tapewire is an adhesive-backed Mylar tape containing electrical conductors. * The tape is .005 thick by 5/8" wide and can be painted. It can be run under grass mats or behind wallpaper. Tapewire can be used throughout the layout, but is most useful where "invisible" wiring is desired. Connections are pinned together with brads and do not require soldering.
...more about the Cir-Kit Concepts Inc Tapewire -- 2 Conductor (15')

Features: For connecting tapewire system to transformer lead-in. Use with #206-1008.
...more about the Cir-Kit Concepts Inc Junction Splice

Features: For connecting transformer to tapewire system. Plug on one end mates with Junction Splice. Opposite ends of 6' lead connect to transformer terminals.
...more about the Cir-Kit Concepts Inc Transformer Lead-In Wire

Features: * Miniature swivel spotlight features top mounted 360 side-to-side movement. * Large size bulb is a highly focused lens for light concentration and will burn for 5000+ hours. Bulb snaps in and works on a 12V system. 7/8" long, 3/8" diameter.
...more about the Cir-Kit Concepts Inc Swivel Spotlight

Features: * 5/64" 2.0mm diameter. Use wherever a "to scale" flame look is desired. * Solid 1" wire terminals. 12V 40mA.
...more about the Cir-Kit Concepts Inc Bulb -- 12V Micro-Flame w/Wire Terminals

Features: * SPDT, for turning lights and accessories on and off. Only 1/4 x 7/16" in size. For tape or conventional wiring systems. Instructions included. * Pound-in construction.
...more about the Cir-Kit Concepts Inc Switch -- Miniature Slide

Features: For making small holes for brass brads. Eliminates the risk of making holes that are too large.
...more about the Cir-Kit Concepts Inc Pilot Hole Punch

Features: * Used for connecting tapewire and conventional wiring systems. No soldering required. * Used for connecting tapewire and conventional wiring systems. No soldering is required.
...more about the Cir-Kit Concepts Inc Brass Brads 1/8''

Features: Fuse holder and wire sockets for in-line conmnection. Fuse not included.
...more about the Cir-Kit Concepts Inc In-Line Fuse Holder