Snap Relay by Atlas
|
| $12.50 $9.09
(27% off) |
Product Number
atl200 |
Availability
In Stock |
A double-pole, double-throw electrical switch actuated by a remotely controllable twin-coil, momentary power electromagnet. It can do all sorts of useful jobs on your layout, some of which are. -Power the frogs on Mark 2 Turnouts to eliminate the s hort ''dead- spot'' and prevent stalling of short-wheel-based locos. -Power trackside signal lamps to show switch point settings. -Feed control panel lamps to show points setting of remotely located turnouts. -Selective power
...more about the Atlas Snap Relay
|
Aluminum connectors (Horseshoe shaped flat piece with single end for placement of wire). Spade Connectors are designed to be used with your terminal sections of railroad track. 24 Spade Connectors #3. This is a Package of 24 #3 Spade Connectors fro m Atlas Model Railroad
...more about the Atlas Spade Connectors #3 (24)
|
Selector by Atlas
|
| $9.75 $7.09
(27% off) |
Product Number
atl215 |
Availability
In Stock |
SPDT. This device enables the operation and control of two trains at the same time. It has four single-pole, double-throw switches to provide two-cab operation for four blocks. May be ganged together in any number to control additional blocks witho ut inter-switch wiring. Can be used as area selectors for four-cab operation. Couples with #220 Controller (ATLU0220)--not provided in package. Instructions are listed on the back of the package. One Selector with Screws. This
...more about the Atlas Selector
|
Controller by Atlas
|
| $10.25 $7.49
(26% off) |
Product Number
atl220 |
Availability
In Stock |
This control provides the simplest way to wire and control tricky reverse loops, wyes, and turntables. It has reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing. loops, and so on. Cab Switches (Red--for Cab A and Cab B). Cab Selector Switch (Green). Direction Switch (Gray). Couples with #215 Selector (ATLU0215)--not provided in package. Instructions provided on package. One Controller. This Selector is an
...more about the Atlas Controller
|
Controls Atlas (or other twin coil) switch machines with SPDT momentary action. Button position indicates turnout setting. Can be coupled together in any number without wiring. Switch identification tables included. You may connect additional switc h control boxes. Detailed illustrated instructions provided on package. One Switch Control Box. Two Double-Ended Spades. Screws (2 Sizes). This Switch Control Box was Designed for Your HO Scale Track Layout by Atlas Model
...more about the Atlas Control Box HO
|
|
|
|
This patent-pending multi-function decoder, once installed, allows your locomotive to operate flawlessly on any kind of layout, analog or digital. The simple removal and replacement of a jumper plug is all it takes to go from digital to analog mode . A complete HO scale system in 1-2-3. 1; Commander for control. 2; Generator for power. 3; Decoder for operation. 14-, 28- or 128-speed step selectable. Two function outputs with a current rating of 200 mA that can be
...more about the Atlas Atlas Master DCC -- 2-Function Dual-Mode(R) Decoder
|
Designed to follow all NMRA DCC Standards and RP's to ensure full compatability with all compliant NMRA DCC systems. 14, 28, 128 speed step selectable. Four function outputs, each with a current rating of 200 ma. Headlights may be configured for di rectional, independent, or Rule 17 lighting and may be dimmed using another function. Additional functions may be configured for ditch lights, or independent on/off control with variable blink rate. Support for advanced consist
...more about the Atlas Atlas Master DCC System -- Dual-Mode 4 Function Decoder - HO-Scale
|
|
|
|
