Miniatronics Model Trains

Good for any application that requires a regulated power
...more about the Miniatronics Corp. Electric Accessories -- Plug In Wall Transformer, Regulated 12v DC 1amp

Units require no assembly and will operate on any 9-14V AC or SC external power source. For use on diesel engines, roaday warning lights, tower signals or emergency
...more about the Miniatronics Corp. Flasher/Beacons (PC Board measures 1-3/8 x 1/2 x 1/8'' 3.4 x 1.2 x .3cm) -- Roof Top Beacon w/3mm Amber LED Use w/9-14V AC or DC

Units require no assembly and will operate on any 9-14V AC or SC external power
...more about the Miniatronics Corp. Flasher/Beacons (PC Board measures 1-3/8 x 1/2 x 1/8'' 3.4 x 1.2 x .3cm) -- Dual Emergency Flasher w/2 1.5mm Red LEDs Use w/9-14V AC or DC

Units require no assembly and will operate on any 9-14V AC or SC external power
...more about the Miniatronics Corp. Flasher/Beacons (PC Board measures 1-3/8 x 1/2 x 1/8'' 3.4 x 1.2 x .3cm) -- Rear End Warning Flasher (EOT/FRED) w/1.5mm Red LED Use w/9-14V AC or DC

Create realistic fire scenes with state-of-the-art fire simulator, which features varying bursts of brightness for an authentic
...more about the Miniatronics Corp. Lighting Effects -- Simulated Fire & Flame

Create the illusion of scattered random lights in your auto repair shop, construction site or train yard maintenance shop. Requires 12V DC power
...more about the Miniatronics Corp. Lighting Effects -- Arc Welder

Capture the action of modern railroading with this accessory that includes a fully-assembled PC board with reed switch and two incandescent lamps. Lamps come on at about 3V and remain on until the unit senses a hidden magnet, which causes them to a lternately flash on and off until the unit senses a second magnet, which returns them to constant on. Includes eight bi-polar magnets, enough for four crossings, additional magnets are available
...more about the Miniatronics Corp. Ditch Lights - 1 Unit -- Assembled PC Board w/Reed Switch, 2 Incandescent Bulbs, & 8 Bi-Polar Magnets - HO-Scale

Magnifying lamp features a three-diopeter lens, swivel gooseneck and heavy-duty mounting
...more about the Miniatronics Corp. Mini Magnifier Lamp -- Compact Size, Heavy Duty 2'' Clamp, 12'' Flexible Gooseneck, 3-Diopter 3.5'' Lens

A perfect addition to any high-standing structure, vehicle in transit, or engine on the move! Will operate on 9-14V
...more about the Miniatronics Corp. Simulated Strobe (Circuit Board Measures 1-3/8 x 1/2 x 1/8'' 3.4 x 1.2 x .3cm) -- Blue

A perfect addition to any high-standing structure, vehicle in transit, or engine on the move! Will operate on 9-14V
...more about the Miniatronics Corp. Dual Synchronized Strobes (PC Board Measures 1-3/8 x 1/2 x 1/8'') -- Blue

Unit has 7 LEDs and draws a low 42mA of current. For ease of installation, one set of track pickup shoes and double-sided mounting tape are included. Three resistors allow you to dim the light for use in sleeper cars. Voltage-regulated and rectifie d unit runs AC or DC. 14V AC will work with
...more about the Miniatronics Corp. Passenger Car Interior Lighting Kit - For DC or DCC -- Fluorescent - 1/2 x 10'', 7 LEDs, 42mA Includes 1 Set Pick-Up Shoes - HO-Scale

Very bright white light will fit most HO Scale and larger
...more about the Miniatronics Corp. Lighting Effects -- Light House Warning Beacon

Fully assembled electronics board with two bulbs that create a gyrating figure-eight effect. Includes additional headlight bulb, two clear lenses and adjustment tool. Operates on 5-16V
...more about the Miniatronics Corp. Mars Light -- Adjustable w/Fully Assembled Electronics Board & 2 Bulbs

Control speed on these flashers with variable flash rates. Use with any 12-14V bulb NOT exceeding
...more about the Miniatronics Corp. Incandescent Lamp Flasher -- Single - Controls 2 50mA or 3 30mA Lamps (For Neon-Like Signs Sold Separately)

Unit automatically dims and brightens, then repeats the sequence. Requires filtered 12V DC power
...more about the Miniatronics Corp. Two Directional Light (Automatically Brightens & Dims) -- HO Scale w/18'' 45cm Insulated Wire Leads - HO-Scale

A perfect addition to any high-standing structure, vehicle in transit, or engine on the move! Will operate on 9-14V
...more about the Miniatronics Corp. Dual Synchronized Strobes (PC Board Measures 1-3/8 x 1/2 x 1/8'') -- Yellow

A 470 ohm resistor is supllied with each
...more about the Miniatronics Corp. Micro Mini Light Emiting Diodes (LEDs) - 1/16'' 1.5mm Diameter -- 6 Each - Red, Green, Yellow pkg(18)

White LEDs leave a slight blue haze around the perimeter of light. Must be used with a 560 ohm resistor, which is included with each package. Must be used with a 560 ohm resistor, which is included with each
...more about the Miniatronics Corp. Standard Light Emiting Diodes (LEDs) 1/8'' 3mm Diameter -- White pkg(2)

These LEDs feature a clear lens and combine the super-bright intensity of a white LED with the warm yellow glow of an incandescent lamp to make engine headlights more realistic. Choose from two different sizes to fit your favorite motive
...more about the Miniatronics Corp. Yeloglo White LEDs pkg(5) -- 3mm

White LEDs leave a slight blue haze around the perimeter of light. Must be used with a 560 ohm resistor, which is included with each
...more about the Miniatronics Corp. Standard Light Emiting Diodes (LEDs) 5mm Diameter -- White pkg(2)

These LEDs feature a clear lens and combine the super-bright intensity of a white LED with the warm yellow glow of an incandescent lamp to make engine headlights more realistic. Choose from two different sizes to fit your favorite motive
...more about the Miniatronics Corp. Yeloglo White LEDs pkg(5) -- 5mm