Model Trains

These piers help you to create a ''Figure 8'' over/under track plan. Fast and easy assembly. Pivoting track brackets for best support of track incline. Removable bases for floor/carpet set up. Nail holes for permanent installation on railroad layout. Molded black plastic. Detailed instructions provided. 16 Piece Pier Set. Use this 16 Piece E-Z Track Plastic Pier Set to create Exciting Over/Under Action to your N Scale Track Plan from .....
...more about the Bachmann E-Z Pier 16 Piece Set N

This is an all-tall pier set for elevating longer track spans. Optional pier bases designed for hard floors or carpet. Pivoting track brackets for best support of track incline. Nail holes for permanent installation on railroad layout. Fast and easy, snap-together assembly. Injection molded plastic parts. Compatible with most other popular track and roadbed systems. Detailed instructions provided. (8) Tall Piers. This is the 8 Piece N Scale E-Z Track Tall Pier Set by .....
...more about the Bachmann Tall Pier 8 Pc Set N

Bachmann operating accessories make any layout more fun. The Bridge and Trestle set is authentic in every detail and will add extra action to any N scale set-up. Black and gray plastic parts. Set makes an over and under layout. Detailed instruction and diagram sheet. Set may be used to build a higher level grade crossing or to build a bridge over a river ravine. Two Sets of Trestles #1-#13 (26 pieces). Two Ramp Sections Numbered #14. Two Bridge Sides. One Bridge Deck .....
...more about the Bachmann Bridge & Trestle (31) N

Realistically molded in silver plastic to resemble steel. Use with N scale brass or nickel track. One piece of straight track is molded to the bridge and includes two removable rail joiners. Sidewalks within bridge are detailed to resemble wood planks. Opened, steel frame sides. Two permanent handpainted railroad worker figures; one on each interior side. Holes are provided for the ability to be tacked down to your layout. One N Scale Truss Bridge with Two Painted Figures. .....
...more about the Model Power Truss N

Realistically molded in silver plastic to resemble steel. Use with N scale brass or nickel track. One piece of straight track is molded to the bridge and includes two removable rail joiners. Sidewalks within bridge are detailed to resemble wood planks. Opened, steel box frame. Two permanent handpainted railroad worker figures; one on each interior side. Holes are provided for the ability to be tacked down to your layout. One N Scale High Bridge with Two Painted Figures. .....
...more about the Model Power High Bridge N

Realistically molded in black plastic. Use with N scale brass or nickel track. One piece of straight track is molded to the bridge and includes two removable rail joiners. Sidewalks within bridge are detailed to resemble wood planks. Two permanenthandpainted railroad worker figures; one on each interior side. ''Santa Fe'' (white) and logo (yellow) are printed largely on each side. Holes are provided for the ability to be tacked down to your layout. One N Scale Santa Fe .....
...more about the Model Power Girder Santa Fe N

Painted items add realism to trains or scenic layouts. Signal bridge is silver and consists of two ends that resemble a tower-like structre, one with a ladder all the way up it. Top bridge piece has a walkway surrounded by handrails for safety, plus a red and green signal light painted on the front. Two small working men accompany the signal bridge, one in an all brown attire, the other wearing green pants and a red shirt. Detailed, well crafted, and realistic items. One N .....
...more about the Model Power 3-Pc Signal Bridge Set w/2 Figures (3) N

Abutments measure 3'' high, 2-1/4'' wide at base and 1/2'' thick (7/5 x 5.6 x .....
...more about the A I M Products Bridge Abutments -- Cut Stone - N-Scale (2)

1-7/8'' tall at high end, 1-1/8'' at low end, 3-1/6'' wide and 5/8'' thick (4.6 x 2.8 x 0.4 x .....
...more about the A I M Products Abutment Wings -- Cut Stone - N-Scale (2)

Abutments measure 3'' high, 2-1/4'' wide at base and 1/2'' thick (7/5 x 5.6 x .....
...more about the A I M Products Bridge Abutments -- Random Stone - N-Scale (2)

Tunnel portals measure 2-3/4'' high, 3-1/6'' wide at base and 5/8'' thick (6.8 x 7.8 x .....
...more about the A I M Products Single-Track Tunnel Portal -- Cut Stone - N-Scale

Tunnel portals measure 2-3/4'' high, 3-1/6'' wide at base and 5/8'' thick (6.8 x 7.8 x .....
...more about the A I M Products Single-Track Tunnel Portal -- Random Stone - N-Scale

3'' high, 4'' wide at base and 5/8'' thick (7.5 x 10.5 x .....
...more about the A I M Products Double-Track Tunnel Portal -- Random Stone - N-Scale

...more about the A I M Products Bridge Abutment -- Cut Stone-Prefinished - N-Scale

Based on a UP prototype located in Californias Afton Canyon, this detailed, assembled brass model will look at home on any steam- or diesel-era layout. Bridge features see-through walkways, full rivet detailing, and rigid .....
...more about the BLMA Assembled Brass 150' Truss Bridge -- Silver 11-1/2'' 29.2cm Long - N-Scale

Segmental Concrete Bridges are Used Everywhere When old wooden or metal bridges wear out, railroads replace them with new concrete structures. Concrete Segmental Bridges from BLMA bring these modern structures to N Scale. These easy-to-build plastic kits are patterned after prototype structures. Like the prototypes, adding more segments yields a longer bridge. Set A includes two ends/abutments and three bridge segments (no abutments). Set B is an expansion set that includes .....
...more about the BLMA Concrete Segmental Bridge Set #A, Plastic Kit - N-Scale

Segmental Concrete Bridges are Used Everywhere When old wooden or metal bridges wear out, railroads replace them with new concrete structures. Concrete Segmental Bridges from BLMA bring these modern structures to N Scale. These easy-to-build plastic kits are patterned after prototype structures. Like the prototypes, adding more segments yields a longer bridge. Set A includes two ends/abutments and three bridge segments (no abutments). Set B is an expansion set that includes .....
...more about the BLMA Concrete Segment Bridge Set #B, Plastic Kit - N-Scale

This bridge has square post piers that sit on a horizontal bottom support (concrete or stone on the prototype) and is the first bridge kit with laser-cut wood parts. This type of trestle was found on nearly every railroad in North America. Trestlemay be built straight or curved and includes laser-cut piers and bulkheads, Bridge Flex Trak and pre-cut wood parts. Also include full-scale templates and curve templates to aid in .....
...more about the Blair Line Pile & Frame Trestle Kit -- 5-5/8'' Long x 1-1/4'' Tall 14 x 3.1cm - Build Straight or Curved - N-Scale

Craft Train Kit features all-wood construction, with many parts pre-cut to size. Template drawings and instructions are .....
...more about the Campbell Scale Model Tall Straight Timber Trestle -- 11'' (27.5cm) span - 3-3/8'' (8.1cm) high - N-Scale

Craft Train Kit features all-wood construction, with many parts pre-cut to size. Template drawings and instructions are .....
...more about the Campbell Scale Model Low Curved Timber Trestle -- 5-1/2'' (13.7cm) span - 1-3/8'' (3cm) tall - N-Scale

Craft Train Kit features all-wood construction, with many parts pre-cut to size. Template drawings and instructions are .....
...more about the Campbell Scale Model Thru Timber Bridge -- 5-1/4'' (70 Scale Feet) Span - Overall Length- 7-5/8'' (101 Scale Feet) - N-Scale

Hand cast in durable resin. Exquisite cut stone detail!. Ends taper to a point. Can be cut with razor saws, and shaped with files. (2) Piers. These are Stone Bridge Piers by Chooch .....
...more about the Chooch Enterprises Cut Stone Bridge Pier - Package of 2 -- 2.5x.6x2.12'' - N-Scale

Hand cast in durable resin. Exquisite cut stone detail!. Can be cut with razor saws, and shaped with files. (2) Piers. These are Stone Rectangular Bridge Piers by Chooch .....
...more about the Chooch Enterprises Cut Stone Bridge Rectangular Pier - Package of 2 -- 2.12x.7x2.12'' - N-Scale

Hand cast in durable resin. Exquisite small cut stone detail!. Edges are straight cut. Can be cut with razor saws, and shaped with files. (2) Abutments. These are Single Stone Bridge Abutments by Chooch .....
...more about the Chooch Enterprises Single Cut Stone Bridge Abutment - Package of 2 -- 1.75x2.4'' - N-Scale

Hand cast in durable resin. Exquisite medium cut stone detail!. Edges are straight cut. Can be cut with razor saws, and shaped with files. (2) Abutments. These are Double Stone Bridge Abutments by Chooch .....
...more about the Chooch Enterprises Double Cut Stone Bridge Abutment - Package of 2 -- 3x2.4'' - N-Scale

...more about the Faller Gmbh Concrete Footbridge -- 8-1/2 x 4-3/4'' 21.5 x 12cm - N-Scale

...more about the Faller Gmbh Curved Steel Bridge -- 7-1/2'' 19.3cm Radius - N-Scale (4)

...more about the Faller Gmbh Curved Steel Bridge -- 8-7/8'' 22.5cm Radius - N-Scale (4)

...more about the Faller Gmbh Pier Set for Approach Ramp -- 1/8 x 2-1/4'' 0.5 x 6cm - N-Scale

...more about the Faller Gmbh Assorted Concrete Bridge Piers -- 3-1/8 x 1/2'' 8 x 1cm - 3-1/8 x 3/4'' 8 x 2cm - N-Scale