Model Trains

...more about the Marklin, Inc C Track Arched Bridge 14-3/16'' - HO-Scale

...more about the Micro Engineering Deck-Girder Bridge w/Open Deck - Kit -- HO 30' - 4-1/8 x 1-3/8'' 10.5 x 3.5cm - HO-Scale

Deck girder bridges are used by prototype railroads more frequently than any other type of bridge. They span everything from ditches to small rivers. These kits include X braces, lateral braces, rivet plates, bridge shoes and extensive molded-in details including rivet heads. The Open Deck Bridges include Bridge Flex-Track while the modeler's regular ballasted track runs across Ballasted Track Deck .....
...more about the Micro Engineering Deck-Girder Bridge w/Open Deck - Kit -- HOn3 50' - 7 x 1-3/8'' 18 x 3.5cm - HOn3-Scale

Deck girder bridges are used by prototype railroads more frequently than any other type of bridge. They span everything from ditches to small rivers. These kits include X braces, lateral braces, rivet plates, bridge shoes and extensive molded-in details including rivet heads. The Open Deck Bridges include Bridge Flex-Track while the modeler's regular ballasted track runs across Ballasted Track Deck .....
...more about the Micro Engineering Deck-Girder Bridge w/Open Deck - Kit -- 85 Scale Feet Long - HO-Scale

...more about the Micro Engineering Deck-Girder Bridge w/Ballasted Deck - Kit -- HO 30' - 4-1/8 x 1-13/16'' 10.5 x 4.5cm - HO-Scale

...more about the Micro Engineering Tall Steel Viaduct Kit -- 150' Long w/Bents - HO-Scale

These kits contain all the details and interior structure found on prototype bridges, such as lateral bracing, crossbeams with knee braces, stringers, rivet plates, bridge shoes and extensive molded-in detail including rivet heads. HO Code 83 Bridge Flex-Track is included with each kit. The bridges can be modeled with square or rounded ends on the girders -- both types are found on the prototype. They can also be modeled as open-deck bridges using the ''concrete'' deck .....
...more about the Micro Engineering 50' Thru Girder Bridge -- Single Track - HO-Scale

These kits contain all the details and interior structure found on prototype bridges, such as lateral bracing, crossbeams with knee braces, stringers, rivet plates, bridge shoes and extensive molded-in detail including rivet heads. HO Code 83 Bridge Flex-Track is included with each kit. The bridges can be modeled with square or rounded ends on the girders -- both types are found on the prototype. They can also be modeled as open-deck bridges using the ''concrete'' deck .....
...more about the Micro Engineering 50' Thru Girder Bridge -- Double Track - HO-Scale

Includes center support .....
...more about the Micro Engineering 100' Through Girder Bridge -- Single Track - HO-Scale

Includes center support .....
...more about the Micro Engineering 100' Through Girder Bridge -- Double Track - HO-Scale

...more about the Micro Engineering Tall Steel Viaduct Length Extension -- 80' - HO-Scale

...more about the Micro Engineering Tall Steel Viaduct Length Extension -- 60' - HO-Scale

...more about the Micro Engineering Tall Steel Viaduct Length Connection -- 30' - HO-Scale

Includes two 30' deck girder bridges and one 50' thru girder .....
...more about the Micro Engineering Three-Span Combination Bridge -- 110 Scale Feet - 15-1/8 x 3-3/4'' - HO-Scale

Includes two 30' deck girder bridges and two 50' thru girder .....
...more about the Micro Engineering Four-Span Combination Bridge -- 160 Scale Feet - 22 x 3-3/4'' - HO-Scale

Tall steel viaducts are some of the most spectacular and interesting types of bridges. They are used by railroads to span wide and/or steep valleys, often replacing wooden trestles. These HO and HOn3 Tall Steel Viaducts are available in three basekits, three length extension kits, a height extension kit which adds a 4th and 5th story, and a tower kit. The various kits allow you to design and build your own custom bridge of any length from one to five stories high, with .....
...more about the Micro Engineering Tall Steel Viaduct Height Extension -- Two Story for Two Towers - HO-Scale

Tall steel viaducts are some of the most spectacular and interesting types of bridges. They are used by railroads to span wide and/or steep valleys, often replacing wooden trestles. These HO and HOn3 Tall Steel Viaducts are available in three basekits, three length extension kits, a height extension kit which adds a 4th and 5th story, and a tower kit. The various kits allow you to design and build your own custom bridge of any length from one to five stories high, with .....
...more about the Micro Engineering 210' Tall Steel Viaduct, Low Bridge w/Bents -- 7 30' Spans, 6 1,2,or 3-Story Bents, 29''L x 10 5/8'', 7 1/2'' or 4 1/4'' H - HO-Scale

Kit makes two single-track or one double-track .....
...more about the Micro Engineering Bridge Support -- 3-3/8 x 9-1/2'' 8.4 x 24cm - HO-Scale

...more about the Micro Engineering 85' Plate Girder pkg(4) -- 8 Girder Sections Scale 42.5' in Length - HO-Scale

...more about the Model Power Truss Bridge - HO-Scale

...more about the Model Power Blinking Bridge - HO-Scale

...more about the Model Power Girder Bridge w/Figure & Wood Type Walk Unlettered - HO-Scale

Cross natural or man-made obstacles with ease by installing this bridge on your railroad. Designed especially for the first-time builder, the HO Scale kit includes pre-cut wooden channels, beveled angle posts and a special construction jig so you can build with confidence. The package features a full-color photo of the finished model, and a 24 page instruction book, that includes a section on how to install the completed bridge on your layout. The bridge can be used with .....
...more about the Midwest Silver Creek Timber Bridge Kit -- 10-3/8 x 2-9/16 x 2'' 26.3 x 6.5 x 5.1cm - HO-Scale

Create a realistic variety of wooden bridges and trestles for your HO Scale layout with these easy-to-build wood kits. Skill Level 1 is designed for first-time builders and assembly with basic hobby tools; a few parts need cutting and fitting. Skill Level 2 kits are designed for builders with some experience shaping, cutting or fitting parts and include assembly jigs to simplify some steps. All kits feature micro-cut basswood parts, many of which are pre-cut or shaped. A .....
...more about the Midwest Eagle Pass Truss Bridge -- 11-7/8 x 2-5/32 x 3-1/2'' 30.1 x 5.4 x 8.9cm - HO-Scale

Used primarily to span rivers, this Skill Level 2 kit allows modelers to construct their own thru-truss bridge. The pre-painted construction jig and guide blocks allow for accurate assembly. Kit includes pre-cut, beveled wood parts, injection-molded nut-bolt-washer castings, music wire for tension rods, styrene for tension plates, drill bit, styrene U-channel stock and plan .....
...more about the Midwest Fox River Through-Truss Bridge -- 11-7/8 x 2-5/32 x 3-1/2'' 29.7 x 5.4 x 8.8cm - HO-Scale

Monroe Models bridges feature realistic high-density gypsum castings. All are easily assembled using white glue or ACC. Paint them using any water-based hobby paints. Kits come packaged in strong corrugated-cardboard boxes and include instructionswith assembly diagrams. This single-track bridge features six castings in a highly detailed cut-stone pattern. Includes front and back arch and all four wing .....
...more about the Monroe Models Single Track Bridge Kit -- Stone Arch 11-1/2 x 7-1/2 x 3'' 29.2 x 19.1 x 7.6cm - HO-Scale

Monroe Models bridges feature realistic high-density gypsum castings. All are easily assembled using white glue or ACC. Paint them using any water-based hobby paints. Kits come packaged in strong corrugated-cardboard boxes and include instructionswith assembly diagrams. Based on a simple, single-track cast-concrete bridge this kit features wood details cast in place. Includes three piers, two abutments, bridge deck and road signs for a highway running under the .....
...more about the Monroe Models Single-Track Bridge Kit -- Concrete 9-1/4 x 3 x 3'' 23.5 x 7.6 x 7.6cm - HO-Scale

Monroe Models bridges feature realistic high-density gypsum castings. All are easily assembled using white glue or ACC. Paint them using any water-based hobby paints. Kits come packaged in strong corrugated-cardboard boxes and include instructionswith assembly diagrams. Featuring Art Deco styling, this double-track bridge includes seven castings; four wing walls, two abutments and the bridge deck. Also included are cast white-metal bridge railings plus highway road barrier .....
...more about the Monroe Models Art Deco Double Track Bridge Kit -- 5-1/2 x 14 x 3-9/16'' 14 x 35.6 x 9.1cm - HO-Scale

Laser cut plywood and basswood parts. Includes signs for the bridge and roadway. Measures; 13-1/2 x 3-1/4 x 4-1/8'' 34.3 x 8.3 x 10.5cm; Underpass Opening; 2-1/2 x 3-5/16'' 6.4 x .....
...more about the Monroe Models Country Road Bridge - Kit (Laser-Cut Wood) -- Country Road Bridge - HO-Scale

...more about the Model Railstuff Stone Bridge Piers - Red (One-Piece, Painted Plaster Castings) -- Set w/1 Each 3-1/2'' 8.7cm, 5-1/2'' 13.7, & 8-1/2'' 21.2cm Tall - HO-Scale (3)