 Great Gift Idea
Tamiya presents the robot replica of the beloved kangaroo from Australia. This amazing kangaroo-robot jumps by moving its rear legs simultaneously to go forward. When walking slowly, it also uses its front legs (just like they do down under) and when running quickly, it uses its tail for balance. Legs and body on which the gearbox is mounted employ transparent-colored parts, giving the kangaroo a funky look. Reverse switch is also transparent, giving you a peek at the kangaroo's internal mechanisms. Assembly is very simple with use of screws and snap-lock parts. Cable ends are rubber capped with cut areas pre-marked for easy wiring.
...more about the Tamiya Mech Kangaroo Two-Leg Jumping Type
|
This is a 2-leg walking-type Mechanical Ostrich. Motor rotating power is transferred to the legs via crank plates to make the ostrich walk. Legs and body on which the gearbox is mounted employ transparent-colored parts, giving the ostrich a funky look. Reverse switch is also transparent, giving you a peek at the ostrich's internal mechanisms. Assembly is very simple with use of screws and snap-lock parts.
...more about the Tamiya Mechanical Ostrich
|
This is a 4-leg walking-type Mechanical Giraffe. Motor rotating power is transferred to the legs via crank plates to make the Giraffe walk. The long neck and legs, which have been specially molded to replicate the unique motifs of the actual giraffe, and body on which the gearbox is mounted employ transparent-colored parts, giving the giraffe a funky look. Reverse switch is also transparent, giving you a peek at the giraffe's internal mechanisms. Assembly is very simple with use of screws and snap-lock parts.
...more about the Tamiya Mechanical Giraffe
|
Now you can control where your robot will go. Thanks to a 2-channel remote control, you can make your mechanical insect move forward/backward or make it turn to the left and to the right. Everything needed to assemble your model is included. The kit features 2 gearboxes, one for each set of legs. The remote-control circuit is pre-wired to the motor and the gearboxes are pre-assembled to achieve ease of assembly. Features: The Mechanical Insect is equipped with two gearboxes, one that controls the right hand side legs and one that controls the left hand side legs. While working in the same direction, the gearboxes allow your robot to move forward and backward. While working
...more about the Tamiya Mechanical Insect 2-Ch R/C
|
Introducing the 8th wonder of the Robocraft series! Get ready, because here comes a super fun to assemble, super fast, super colorful Mechanical Rabbit. Motor rotating power is transferred to the legs via crank plates to make the rabbit hop. The long ears and the rounded face, which have been specially molded, employ semi-transparent parts, giving the rabbit a funky look. Assembly is very simple with use of screws and snap-lock parts.
...more about the Tamiya Mechanical Rabbit
|
Tamiya now presents the Mechanical Tiger as its next addition to the Robocraft Series. Power from the rotating motor is transferred to the legs via crank plates to make the tiger walk. Tiger's body parts have been molded with yellow semi-transparent plastic, giving the tiger a futuristic look. Assembly is very simple with use of screws and snap-lock parts. Features: Power from the rotating motor is transferred to the legs via crank plates to make the tiger walk. 2 possible gear ratios coupled with 4 different strides let you choose 8 different speeds. A reverse switch also allows backward movement.
...more about the Tamiya Mechanical Tiger
|
The latest release in the Robocraft Series, this easy to assemble R/C boxer is not only educational but also a lot of fun for kids and adults. The boxing fighter features a twin motor gear box enabling this little boxer to punch while moving backwards, forwards or turning to the left or right. You can also adjust the level of each fighter, making it easier or harder for your fighter to be knocked down. Features: Through a simple adjustment the type of punch can be changed from an upper cut to a straight jab. Hitting the face of an opposing fighter enough times will cause them to fall over, making it loads of fun to fight your friends robot. Kit also comes with practice pun
...more about the Tamiya R/C Boxing Fighter
|
The Mechanical Pig has shaking head action. Pig's body and head parts have been molded with pink semi-transparent plastic, giving the pig a futuristic look. Assembly is very simple with use of screws and snap-lock parts. .
...more about the Tamiya Mechanical Pig
|
The galloping racehorse with jockey is loads of fun to build, loads of fun to play with, and educational too! Employing left and right legs moving at the same time, the legs and wheel base have been designed for stability and faster running. Overall this galloping racehorse can run 1.3 times faster than the mechanical rabbit. Features: The mechanical horse is comprised of mainly transparent orange plastic allowing internal mechanics to be easily seen. Kit includes 3 types of stickers for representation of horse's mask and number, and jockey's clothes to make each model easily distinguishable while racing with friends.
...more about the Tamiya Mechanical Galloping Racehorse
|
The Boxing Fighter now comes as a set of 2. The boxing fighter features a twin motor gear box enabling this little boxer to punch while moving backwards, forwards or turning to the left or right. The Boxing Fighter is also equipped with a judging plate that will allow you to decide who the winner of the fight is. The plate will lower each time you hit your opponent's mouth. When your opponent's plate is completely lowered, you win the fight. You can also adjust the level of each fighter, making it easier or harder for your fighter to be knocked down by fitting one or two stays to the bottom rear of the fighter. Assembly is very simple with use of screws and snap-lock parts. Packaging special
...more about the Tamiya 2-Ch R/C Boxing Fighter Battle Set
|
This is Tamiya's first water based Robocraft, the Mechanical Blowfish. With a comical inflated design, this cute little blowfish is loads of fun to build, loads of fun to play with, and educational too! The Mechanical Blowfish is propelled forward by a left-right moving tail fin rotated by a crank and link rod. The rounded body gives the Blowfish a unique look different to the flat design of previous Robocraft pieces. .
...more about the Tamiya Mechanical Swimming Blowfish
|
Internal motor spins a cylindrical plate with a weight (a screw) placed on one side creating an updown rapid vibrating movement. This vibration is then conveyed to 3 rods that smoothly propel the model forward in a sliding type movement. Easy assembly using snap-on parts and screws. Powered by a Type 130 motor. Direction can be easily altered by changing the direction of the rods. Speed can be adjusted by changing the angle of the rods. Body shape designed to represent various popular animals whilst maintaining a curved form to move around obstacles. Eyes act as rollers also helping model to smoothly work around obstacles. Games and races can be easily made by building an obstacle course usi
...more about the Tamiya Sliding Fox Vibrating Action
|
Internal motor spins a cylindrical plate with a weight (a screw) placed on one side creating an updown rapid vibrating movement. This vibration is then conveyed to 3 rods that smoothly propel the model forward in a sliding type movement.Easy assembly using snap-on parts and screws. Powered by a Type 130 motor. Direction can be easily altered by changing the direction of the rods. Speed can be adjusted by changing the angle of the rods. Body shape designed to represent various popular animals whilst maintaining a curved form to move around obstacles. Eyes act as rollers also helping model to smoothly work around obstacles. Games and races can be easily made by building an obstacle course usin
...more about the Tamiya Sliding Ladybug Vibrating Action
|
This is the Stag Beetle Radio Control Kit from Tamiya's RoboCraft Series. For Ages 10 and Up. Features: This robot beetle kit utilizes the crank axle and link system to simulate four-legged walking action Horn, legs and body are transparent plastic Transparent reverse switch gives you a look at the beetle's internal mechanism Simple assembly with screws and snap-lock parts Includes gearbox and motor A small screwdriver is included Pictorial assembly instructions.
...more about the Tamiya Mechanical Stag Beetle 2 Ch Remote Control Kit
|
This is the 2-Channel Remote Control Insect Dueling Set from Tamiya's RoboCraft Series. For Ages 10 and Up. Features: 2-channel remote control rhinoceros & stag beetle Metallic finish deoration stickers Motors easily attach to gearboxes Includes phillips screwdriver Body parts are transparent blue and yellow plastic Simple assembly with screws and snap-lock parts Pictorial assembly instructions.
...more about the Tamiya 2-Channel Remote Control Insect Battle Set
|
This is the 2-Legged Walking Robot With Wind-Up Generator by Tamiya Modeling skills helpful if under 10 years of age. Features: Includes a hand-held wind-up generator unit that can produce electricity to operate the wire-linked robot Motor with 38. 2:1 gear ratio for gear speed-increasing can produce about 2. 5V of electricity Leg supports provide stability Comes with a duck head and an ostrich head to choose from Easy assembly features snap-together parts and screws Includes screwdriver No batteries are required Illustrated instructions included.
...more about the Tamiya Walking Robot w/Wind Up Generator 2 Legs
|
This is the 4-Legged Walking Robot With Wind-Up Generator by Tamiya Modeling skills helpful if under 10 years of age. Features: Includes a hand-held wind-up generator unit that can produce electricity to operate the wire-linked robot Motor with 38. 2:1 gear ratio for gear speed-increasing can produce about 2. 5V of electricity The front and rear legs are linked for efficient movement Both eyes and tail move while walking Easy assembly features snap-together parts and screws Includes screwdriver No batteries are required Illustrated instructions included.
...more about the Tamiya Walking Robot w/Wind Up Generator 4 Legs
|
This is the Sumo Wrestler Robot With Wind-Up Generator by Tamiya Modeling skills helpful if under 10 years of age. Features: Includes a hand-held wind-up generator unit that can produce electricity to operate the wire-linked robot Motor with 38. 2:1 gear ratio for gear speed-increasing can produce about 2. 5V of electricity The sumo robot features a crank mechanism with link rods which enables the hands to move in a pushing motion as it walks along Easy assembly features snap-together parts and screws Includes screwdriver No batteries are required Illustrated instructions included.
...more about the Tamiya Sumo Wrestler Robot w/Wind Up Generator
|
This is the Mechanical Mammoth Bobbing-Head Type from the Tamiya Robocraft Series. Suitable for Ages 10 & Older. Features: Four legged mammoth gets into its stride and then the head begins to bobble from left to right Gear ratio (203. 7:1) provides ample walking speed Mammoths trunk is movable by hand Clear ABS parts allow you to easily see the inside internal mechanism at work Set includes clear orange body and clear gearbox Easy to construct with no glueing required Includes motor and screwdriver Front legs feature reciprocating motion and hind legs feature rotating motion as the mammoth walks along Illustrated assembly guide.
...more about the Tamiya Mechanical Mammoth Bobbing Head Type
|
This is the Mechanical Fish Assembly Kit from Tamiya's RoboCraft Series. Suitable for Ages 10 & Up. Features: * Robot can be set to swim in a straight line or turn right/left in circles. * Turning angle can be freely adjusted. * Submarine motor mini high speed type. * Adjust pectoral fins to change swimming movement. * Underwater gearbox. * Various stickers are included for decorating robot. * Gear ratio 28.9:1. * Flexible tail fin creates forward movement. * Raise stopper to enable tail fin angle adjustment. * Pictorial assembly instructions.
...more about the Tamiya Mechanical Fish
|
Getting its name from the way the gears rotate like the planets around the sun, the Planetary Gear Box is a precise, highquality gearbox with a RE-260 motor built into the gear box itself to add to its compactness. A wide range of gear ratios can be attained, and two kinds of crank arms are supplied for a wider range of functions. The gearbox has the ability to produce 15kg of torque when the gear ration is at 400:1 and it has a voltage of 3V. .
...more about the Tamiya Planetary Gearbox Set
|
The High Speed Gear Box, High Efficiency, is perfect for high speed applications. Two gear ratios are possible, and several styles of crank arms are supplied for a variety of uses. A RE-260 motor is included. The gear box can be mounted vertically or horizontally. .
...more about the Tamiya HE Hi-Speed Gear Box Assembly Kit
|
|
|
With the Worm Gear Box, High Efficiency, it is possible to have high power or high speed with two different gear ratios. Several crank arms have been supplied along with a RE-260 motor. This gear box works well in a variety of Tamiya Construction or Robotics projects. .
...more about the Tamiya Worm Gearbox High Efficiency Kit
|
This precision 6-Speed Gear Box, High Efficiency, is a compact unit with a variety of gear ratio options to choose from. Several crank arms and a RE-260 motor are included. Perfect for many Tamiya Construction and Robotics projects. .
...more about the Tamiya 6-Spd Gearbox High Efficiency Kit
|
This is a two-position switch, on/off. Uses 6V and up to a 4A capacity, this switch works well in low power applications. Use in a variety of Tamiya Construction or Robotics projects. The case is made of black plastic. Each Switch has hole on each end for mounting. .
...more about the Tamiya 6P Slide Switch (2)
|
Set this switch to turn on when the switch button is depressed and turn off when the button is released, or set it up the opposite way. Uses 6V and up to 4A capacity. The switch has a small metal plate that engages the switch. It is made of black plastic with holes on each end for mounting. . Features: * Contacts: Steel. * Switch: Forward/reverse. * Capacity: 4A. * Functions: On/off.
...more about the Tamiya 5A Micro Switch
|
Set this switch up for a variety of functions. Uses 6V and a capacity up to 5A. The switch is constructed with metal and red plastic. Features: * Capacity: 5A. * Functions: On/off/on.
...more about the Tamiya 6P Toggle Switch
|
|
|
The 21st century is said to be the age of robotics. Tamiya explores this new trend with the release of an assembly robot snail. The Line Tracing Snail uses a special LED sensor to detect a black line (magic marker, etc.) drawn on a white background. It uses two small motors and rubber tires to slowly but surely move forward and turn. The body of the snail is made of transparent (HIPS) plastic to allow viewing of the intricate mechanisms inside. Features: You can paint or design your own style the Snail's plastic body.
...more about the Tamiya Line Tracing Snail
|
