My wife decided I needed an orange model in my collection. I'm not crazy about orange, but I chose this kit because if she had a real one she'd take it out and see if she could get it stuck. I created some personalized license plates on the computer to make it truly hers. If I had been given this without the box, I probably would have mistaken it for an AMT rather than a Revell. The interior has no window cranks or door handles, the firewall has no brake cylinder or other 3D parts to glue to it, and the chassis/frame/exhaust is all one molded piece. If you choose to go with a color other than the olive drab, then it is light on decals as well because most of them are camouflage. There are two little tabs that hang down underneath the front of the cab, presumably to help align the front bumper. However, the bumper aligns to one side or the other, because one of the tabs is right in the way if you try to center the bumper. I had to cut off one of the tabs to get the bumper to center up. This isn't one of Revell's better kits. The QC is more indicative of an AMT.

The amount of hours spent hunched over your next dream vehicle, in this case a '73-'80 Square body 4X4 model, Is time well spent. For those hours, immersed in details, options, themes, and colors schemes; I'm a 9 year old boy who just cashed in his lawn mowing money, dumped his bike in the front yard and ran in with a box of dreams. 42 years later... that same kid writes a review while waiting for two more of his boxes of dreams. I enjoy this model for it's versatility and detail. The model body comes in white, encouraging you to prep for paint and plan your dreams. there are more higher priced models, but I enjoy the ability of being able to add my own details and customize as I go. I will confess to trying to decide on a paint scheme for the adult (and very rusty '75) version sitting in my driveway. what good is a boy without a dream? thank you Hobbylinc and revell! I have uploaded pictures of two versions already built or mostly built and will add more when they arrive and take on their own attitude. Heck, for under twenty bucks. I'll probably have the makings of a decent truck(Model) show. BTW, only issue-ish is that you should clean out the drivers side hood hinge with an exacto-knife. simple fix, better hood fit. Happy dreaming!!!

Where to start? I’ve always loved the 3RD Generation square body Chevy and GMC trucks from this era. My family have always owned General Motors trucks as long as my family has needed trucks: farming, logging and getting groceries. My Grandfather showed up mid-summer of 1972 with a Plain-Jane blue step-side and I was hooked. I waited a while to write a review of this kit, I’ve been having a hoot trying different things with my kits. My kit(s) came Molded in white. Yes, I LOVE the square body 4X4 so I bought several. It would seem this kit is just a reissue of the same tooling on the original 1978 kit and is a spitting image of the High-Roller kit from the early 80’s, except FAR LESS EXPENSIVE! The mold lines and even the flash is in the same place. The mold lines are very noticeable and so is the lack of any body badging, not even in the decals. I used photo-etch sets off eBay. The same goes for the bland interior. Photo-etch door handles and cranks. If you want to build any kind of detailed replica I think the normal enthusiast is going to find that hard: needs a lot of sculpting and a good imagination to create your own details to get that done. But coming from an optimist, isn’t that the point: creativity? The kit shows its age where the plastic is injected into the mold: ejector marks on the bed, radiator and hood, nothing that crafty painting and sanding can’t fix. Test fitting each major component before assembly is really important, you’re going to find that you’ll need to bore out the wheel retainers, partially assemble the cab for a constant paint job, and even partially assemble the bed for the same reason. Fit and Finish are definitely 1978 era modeling… a good finished product is going to take some modeling skill and patience. It’s a simple and simplified kit. I call it a blank pallet to invent something nifty. Pros: Rugged looking tires, nicely appointed decal sheet, Model looks tuff when finished Cons: Very over simplified and lacks detail, mold lines and injection marks are everywhere, poor INITIAL fit and it takes a fair amount of skill to get it to look just right.